The supply of raw materials has always been an important issue in the Swedish Forest industry. Buying timber from local suppliers is important. To ensure raw materials to their industries the forest company must offer good prices and good business deals to their suppliers. The aims with this work are to find out how the contact between private suppliers of raw materials and how the forest company can be developed. To be able to do a complete study of the problems connecting with this subject a quality interview study has been done.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

Lean Production har sedan länge enbart varit förknippad med tillverkningsindustrin och främst Toyota genom Toyota Production System(TPS). På senare år har Lean Production i allt högre grad introducerats och integrerats i tjänsteföretag under beteckningen Lean Service. Bankbranschen är en bransch där aktörer globalt anammat de bakomliggande filosofierna av Lean Production och Lean Service. I det här arbetet har en undersökning gjorts kring huruvida Lean Production existerar inom svenska banker och om så är fallet hur filosofierna inom Lean Production präglar bankerna. De tre bankerna som valts för undersökningen är de svenska storbanker Nordea, SEB och Handelsbanken.

One of the most distinguishing features of contemporary globalisation is production fragmentation, a splitting up of the manufacturing of a good into several different stages. Production fragmentation creates new opportunities through vertical specialization; a country incapable of mastering the entire production process may specialize in the manufacturing of one separate part. The aim of this thesis is to examine to what extent international integration affects a country?s ability to engage in vertical specialization in an industry characterized by production fragmentation. The analysis focuses on the european integration process over the last decade, where countries in eastern Europe with relatively low labour costs have been integrated with more capital abundant western economies.

Sandvik Group is a global engineering corporation within materials technology and produces, among other things, band sawsteel. In order to develop custom relations, custom benefits and the supply chain Sandvik wants to become more acquainted with its customers. Improved feedback means that Sandvik will be able to develop its products in a customized direction. This thesis is a tool for educating and developing sales staff. As a support a calculation tool that can be used as a sales aid has been developed.

Sitka spruce (Picea sitchensis) is not considered to be a native species to Swedish forests. It´s origin is the pacific coast of Northern America, an area that is dominated by a coastal climate which makes it likely to believe that it would be well suited for growing in the south-west of Sweden. This study aims to investigate the gain in production that can be reached by growing sitka spruce instead of Norway spruce (Picea abies) in the county of Halland. A regression model based on data from forest experiments was produced to explain the gain in production. This model was based on elevation and annual precipitation. The model was then used to create a map layer in arcGIS that shows the gain of volume in comparison to Norway spruce in percent. An analysis was carried out to find what share of the forestland in Halland county that fell into four different classes of production gain.

Since prehistoric time man has used wood to build their environment. The material?s availabilitycombined with its good mechanical properties has often made it the material of choice. Like allmaterials exposed to natures degradative processes the properties of wood decreases over time.Rot, UV radiation and attacks by insects and pests damage wood if not protected. Since we wantwhat we build to consist, optimizing our building materials durability is of great interest.Techniques and methods for increasing the endurance of wood have been developed in severaldifferent places and for a long time.

Many companies do not register all the stops that occur in a production plant, it often takes longer to report than to fix the problem. If no problems are registered, you cannot trace where the problems arise.This master thesis was performed at AcobiaFLUX and they have noticed an increased demand from their customers to trace problems raised in their processes. The aim of the thesis was to find out how a tool to monitor a process best could be developed. Then the most essential from the theoretical base was developed into a useful tool for operators. For the operators to know if the process utilizes the full capacity of a process, the tool presents a measure of the Overall Equipment Efficiency, OEE.

Drinking water from drilled wells has a high content of iron and other minerals in many places in Sweden. Questions about the association between the quality of drinking water and the health of dairy cows are regulary asked both by advisers and dairy farmers. There are so far not many studies published about the relevance for high iron content in water and dairy cow health and production. Therefore, the aim of this study was to investigate if there is a connection between the iron content in water and the health of dairy cows. Initially a literature study was made about iron and it´s function in ruminants.

This paper is about the new methods and metrics used in industry and business today striving for better revenues and larger market shares. It investigates the relations between the old fordistic and tayloristic way of manufacturing and compares it to the models used in industry today for being competitive, seeking to please customers and becoming more flexible. More specific the paper is about if Six Sigma and lean production are the key for succeeding these days. SKF:s factory in Gothenburg and other companies will make an example for how these methods are used in practice.The aim is to try to answer if these systems with inherited tools and methods are the right way to get the flexibility that is needed for being able to deliver the right goods to customers and market. For a company to be flexible decisions must be made fast and needed changes must be able to be done easy and without too large costs and investments.

The forest is characterized by many different values such as those related to forest productivity which are of a big importance for Swedish economy. History has proved that forest resources had helped the country in the transition from the agricultural to the industrial society. Today Swedish forest industry is among the strongest in Europe and significantly contributing to the Swedish export. The industry provides many direct and indirect job opportunities and is one of the biggest employers in the industry sector. It is also worth to notice that the forest can also generate an additional income for the owners, even if the forestry isn?t their primary income source.

The purpose of this report was to compare Lilluns egg production with other Swedish egg producers based on the flow of nutrients (nitrogen, phosphorus and potassium) in the egg production systems. The main focus in the report was the utilization rate of the forage and the excess of nutrients per kg egg. Additionally, the purpose was to identify the environmental impact from Lilluns egg production and compare the results with other egg producers. The inflow of nutrients associated with forage and poultry was compared with the nutrients that were exported from the production. All of the egg producers in this study had an excess of nutrients.

Detta examensarbete handlar ?Verklighetstrogen Effektskomposition?. Målet med arbetet är att undersöka och utnyttja alla de olika aspekterna som gör att en film med specialeffekter känns så verklighetstrogen som möjligt. Arbetet handlar om de olika delarna i en filmproduktionsfas så som pre-production,production och post-production. Filmen som skapas är en specialeffektsbaserad hemmavideo som har som syfte att vara så chockande som möjligt i förhållande till vad man förväntar sig när man börjar kolla.

Sustainable beef and milk consumption. The consumption of beef and dairy products in Sweden is high. A lot of greenhouse gases are emitted from the production of these products. The production of beef in Sweden has decreased but the import has increased. The number of dairy cows has decreased while beef-production with suckler-cows has increased in Sweden.