For the last 50 years the amount of available consumer goods has exploded in number, due to improvements in production and technology. The problem is that the overall sales of many categories are stagnant and retailers are unwilling to grant the categories more shelf space. Therefore many categories are crowded with products and hard for consumers to navigate in. The purpose of this paper is to examine the effects of an assortment reduction on several variables relating to assortment perceptions, customer satisfaction and store choice. The study was carried out as an experiment with 127 participants.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

ABSTRACTThis project thesis has been written at the request of Mälardalens University, Västerås.The aeronautical engineering students at Mälardalens University and the pupils of Hässlö upper secondary school, all gets the opportunity to perform a computation lab with a real turbojet engine during their study. The goal of the lab from the University is that it should give the students applied experience from the theory part of which has been tought in the course ?Aircraft Engine Technology?.                      The pupils of the Hässlö upper secondary school are performing simpler calculations from the measured values of the equipment. This turbojet engine is located at Hässlö airport in the premises of Hässlö upper seconday school.Since the installation 1989, the engine has lost both thrust and reliability. This makes the theoretical computations made by the students inaccurate.

My project is about attitudes towards disabled people, about our fear for those who are different, about acceptance, ideals and normality.My inspiration has been prosthesis, and mostly people that are born without limbs. Through my research I have come across a lot of questions. Such as, why is a prosthesis so important and for whom? Why is it so important to be normal? What is normal and for who? People that are born different se upon themselves as normal, until they realize that others don?t. Many of them want to learn how to deal with life without prosthesis. And therefore they reject these. Sometimes the prosthesis is aids that are highly necessary.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

This report will detail the participator view of partnering in Kvarteret Frodeparken. Kvarteret Frodeparken is a new construction project being jointly delivered by Skanska Sverige AB and Uppsalahem AB. The report will focus on the comparison between the participators view of partnering with an emphasis on common partnering goals. The report will also focus on the economical benefits, the time benefits and the social environment benefits you can find in partnering.The principals of partnering are; participants together make the common goals for the projects, make ice breaking activities to improve stakeholder engagement and working with an open economy to find the profitable choice for the project. With a combination of the three principals the team together decide the best solution for the project.

The forestry companies? operational planning process is these days dependent on reliable, efficient and user-friendly computer-based support systems. This study is an evaluation of Holmen Skog's current computer-based systems. The aim of this study is to: ? investigate the work pattern of the production managers when using the information system to plan the harvesting operation; ? investigate the efficiency and user friendliness of the information system with the different work patterns and to find the strengths, weaknesses and bottlenecks in the current system; ? find out if the type of object, the volume, the area of the harvesting object affects the time and work pattern; ? examine how this type of study is met by the employees and what factors that is critical to avoid feelings of intrusion. The conclusions of the study were: ? there is a large variation between the work patterns of the production managers and the time spend to perform the operational planning; ? the mainframe computer system used by Holmen Skog is clear, has short response times, is robust and conveys relevant information; ? the computer systems are however divided in many subsystems.

Extended Producer Responsibility (ERP) is a form of product take-back regulation that requires the producers to manage their products at the end of life. By internalising the products? entire life cycle costs into the market price the ultimate objective of such regulations is to reduce the environmental burden from the products. This Master´s thesis seeks to examine if the total life cycle cost of a product actually is borne by the producer, and if not, predict who will then take this cost. This is done by analysing the market for take-back activities in three different categories of products; electrical and electronic equipment, cars and wind power stations.

Since prehistoric time man has used wood to build their environment. The material?s availabilitycombined with its good mechanical properties has often made it the material of choice. Like allmaterials exposed to natures degradative processes the properties of wood decreases over time.Rot, UV radiation and attacks by insects and pests damage wood if not protected. Since we wantwhat we build to consist, optimizing our building materials durability is of great interest.Techniques and methods for increasing the endurance of wood have been developed in severaldifferent places and for a long time.

Syfte: Uppsatsen syfte är att klargöra och analysera reporäntans ränteförändringars påverkan på aktiekurserna för samtliga svenska banker i large cap på Stockholmsbörsen.Metod: Kvantitativa händelsestudier har gjorts med deduktiv forskningsansats på fyra företag, samtliga noterade på Stockholmsbörsen. Den onormala avkastningen för de undersökta aktiekurserna har beräknats en dag före till en dag efter samtliga realiseringar av reporänteförändringar som skett mellan åren 2004 till 2015. Teori: Den teoretiska referensramen för studien består av den effektiva marknadshypotesen och överreaktionshypotesen.Slutsatser: Studien har påvisat att det råder signifikant samband mellan ränteförändringar och de studerade aktiernas avkastning vid realisering av ränteförändringarna..

AbstractA general store is a grocery store that is located in the countryside. In today's modern society, it is difficult for general stores to compete with the supermarkets and discounters in terms of price and supply. The purpose of this thesis is to create an understanding of both the rural merchants and its customers? perspective on a well-­?functioning general store. We have conducted a case study of three general stores where we interviewed the merchants about how they do to please their customers? needs and identify key elements of a well-­?functioning general store.

This study is a reception analysis regarding the theology of Martin Luther, specifically in the areas of eschatology and anthropology, in to the funeral practices of the Church of Sweden (Svenska kyrkan).The main theme in the anthropology of Martin Luther is that of the freedom of all men and women. The price that we have to ?pay? for this freedom is that we need to act as humble servants to all other persons.The eschatological view of Martin Luther tells us that the only condition we need to fulfill in order to be admitted into God?s kingdom is faith alone.The Church of Sweden and their views on anthropology and eschatology are inspired by the writings of Martin Luther as it proclaims itself to be of evangelical Lutheran denomination, but it has incorporated other views as well over time.The conclusions of the study is that the principals guiding funeral practices, including eulogies held by priests during the funeral services, are in fact influenced by the anthropological and eschatological views of Martin Luther, and the study concludes that the theology of Martin Luther is a very good stand point for the Church of Sweden to stay relevant in today?s society..

Nowadays the majority of the thinnings made in Swedish forests are done by machines, harvesters and forwarders. The most common model in thinning with a harvester is strip-road operated thinning and stand-operated thinning with one intermediate passage between the strip-roads. This study is a time study with some quality follow ups on a strip-road operated thinning model, a stand-operated thinning model with one intermediate passage between the strip-roads and a stand-operated thinning model with two intermediate passages between the strip-roads. The machines in the study were a small harvester (Forestline MPM C90) and a medium sized forwarder (Timberjack 1110). The study was made in Litsnäset outside the city of Östersund in Sweden and was made during the autumn 2007. In a lodgepole pine stand six study units (0,6 ha) were thinned with the three different models, two study units per model.

I have done a case-study about building a new stable for slaughter pigs at a farm close to Kalmar. The farm is able to supply the breeding with cereals and it has enough area to spread the manure on. The most important factors to gain profit, is the cost for building the stable, the price of the feeding-stuff and the growth of the pigs. The discount from the slaughter-house was less important than I thought from the beginning, and it?s a factor that is hard to influence. With the new production of slaughter-pig and cattle that already exist on the farm, the farm will get a well-functioned rotation of crops with lye and autumn rape as interruption-crop.