This study attempts to examine the existence and development of price differences in the car sector in Europe. The time period is between 1995, the year of the Swedish entrance in the European Union, and 2003. The study is based on data supplied by the European commission, on a bi-annual basis. Both price differences in general in the EU, and price differences between Sweden and other countries in the EU are examined. The theoretical law of one price is related to the economic integration of the EU and the car sector.

During the last few years, there has been a lot of debate regarding the price ofelectricity on the Swedish market. According to a recent survey from Sifo, anon-bias governmental institute for consumer research and testing, the priceof electricity is what worries Swedish households the most. An investigationof the eciency of the Nordic power grids inuence on the Swedish spotprice is therefore both relevant and valuable. Three quarters of all electricityproduced in the Nordic region is traded at the Nord Pool Spot power market.This survey examines how much of the variation of the swedish spot pricecan be descried by the variation of the nordic system price and how much iscaused because of ineciencies in the power grid. Primarily, linear regressionwith adjustments for endogeneity and heteroskedasticity has been used in orderto analyze data obtained mainly from Nord Pool Spot and Vattenfall AB.The results show that the variation of the system price can account for all butabout 40% of the variation in the Swedish spot price.

Femsjö is a small parish situated in Hylte municipality, Växjö diocese. The parish has a total area of 8230 ha of which 5000 ha are covered with forest. There have not been any large industries in the parish offering work opportunities for the inhabitants, so they have had to generate income from their land and the forest. Instead of going to the bank to get a bank loan the people of Femsjö parish went out in to the forest and harvested trees for timber and extra cash revenue. Production of pine tar and potash were two other ways that the residents of Femsjö parish could earn extra money for the household in order to keep starvation away.

This thesis examines the emissions costs of Swedish aviation and their degree of internalisation under current economic instruments. The results show that the degree of internalisation spans from practically zero for a long-haul flight to 6 per cent for a typical domestic flight, where the climate cost, including high-altitude impact, makes up the main part of the cost. To inform evaluation of the consequences of this underinternalisation, or attempts to correct for it using price instruments, the price and income elasticities of international leisure air travel from Sweden are estimated using household expenditure data and two different price measures. The resulting elasticities are very high ? 2.03 or 2.04 for the income elasticity and -2.53 or -1.88 for the price elasticity ? and should be interpreted cautiously due to data limitations, especially for the price elasticities.

A prefabricated timber frame house previously built by Villafabriken AB has been modeled in Autodesk Revit Architectural, a 3D-program based on BIM-technology. This has been done tosee if it?s possible to produce the publications that Villafabriken demands from the designengineer?s work, and examine which possible extra values that may arise compared to traditional 2D-CAD drawing.BIM is short for Building Information Modeling. Everything is stored in a single database and a change in the project file is automatically updated across the project. BIM provides more than just drawings since information from the model can be retrieved in various ways such as lists and quantity schedules.It was possible to produce the publications that Villafabriken demanded using Revit, but BIM doesn?t only mean a new way of drawing, it also require a change in the company?s process were the information from the model is being used..

The supply of raw materials has always been an important issue in the Swedish Forest industry. Buying timber from local suppliers is important. To ensure raw materials to their industries the forest company must offer good prices and good business deals to their suppliers. The aims with this work are to find out how the contact between private suppliers of raw materials and how the forest company can be developed. To be able to do a complete study of the problems connecting with this subject a quality interview study has been done.

Stenebergs sockerbruk is a large log-timber construction, purpose built as a sugar refinery in 1739 and is one of Sweden's oldest industrial buildings constructed entirely out of wood. Despite receiving the status of a listed building (in Swedish: Byggnadsminne) in 1977, there exists today a surprisingly low amount of documentation of the building itself. In order to enhance the existing and lacking building documentation, this case study aims to shed light on the building's log-timber built frame, focusing on how it was constructed, how the long lengths of its walls were handled and what type of joinery and tools were used. A thorough investigation of the building is conducted on site, followed by gathering of information which is then presented through text and illustrations. The findings indicate the orientation of timbers, location of joints and scarfs as well as tool marks which together contribute to the forming of a basis of understanding of the building's construction..

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

Transportation represents 10-15 % of wood supply costs. It is therefore important to improve efficiency in the transport system to decrease these costs. The aim of this study is to map the timber vehicle routing processes used by a sample of timber hauling contractors and to identify possible links between the vehicle routing process and service and economic variables. The study was carried out at Södra Skog in autumn 2008. 15 timber hauling contractors were sampled and interviewed about their work with timber transports.

The aim of this project is to optimise the sawing patterns used for sawing Scots pine at Säters Ångsåg AB. The thesis has a theoretical approach and does not claim to be fully applicable in a practical point of view. The input used in this project is last year?s sales volumes and prices of sawn products. The input of the timber is collected from the database ?VIOL?.

Rundviks sågverk investerade vintern 2007 i systemet GPS Timber. Systemet som är GPS-baserat syftar till att underlätta timmerhanteringen och säkerställa att rätt timmerklass läggs i vältorna och på sågbordet. Dessutom samlar systemet fortlöpande in data angående truckarnas aktiviteter för att möjliggöra analys av vad som sker på timmerplanen.Studien syftar till att undersöka vad införandet betytt för truckförarnas arbete med timmerhanteringen samt vad systemet har för effekt på ekonomin. Med hjälp av insamlad data av GPS Timber ska analysen dessutom resultera i potentiella effektiviseringsområden rörande timmerhanteringen för att förbättra ekonomin i en relativt dyr process. Analysen har visat att truckförarnas arbete har förenklats mycket i och med införandet av GPS Timber.

Illegal logging and its related trade is of great concern around the world. The European Union Timber Regulation (EUTR) is a regulatory approach by the EU to prevent illegal timber and timber products to be placed on the European Union inner market. This means the regulation affects both actors in the member countries as well as the actors exporting timber and timber products to the EU from non EU member countries. This study aims to study the implementation process of the EUTR in Bosnia and Herzegovina (B-H), and its preconditions. Institutional theory is used to understand and explain how the EUTR affects B-H organisations? business environment, and how the organisations choose to respond to the EUTR.

 A villas price depends on several important factors. By statistical data, a mathematical multiple regression model was modeled. The model has important explanatory variables such as living space, renovation year and standard points has been taken into consideration, in order to assess their impact on the final price for private homes.By using a statistical program,Minitab 16, the final model was selected with eight explanatory variables. The regression for this model explains up to 67.3 % of the variation on the final price.The results showed percentage wise that the standard points had the greatest impact on the price, there after renovation year and then living space..

The purpose of this master thesis is to evaluate how the current share price and market consensus affect security analysts target price and if an investor should pay any attention to it. Empirical data is primarily collected from qualitative interviews with ten security analysts but also from a quantitative e-mail survey. Our main finding is that security analysts are indeed affected by each others earnings forecasts as well as the current share price. This is not strange, it is in several aspects rational. Security analysts has often nothing to gain by standing out too much and not either by spending too much time trying to create their own opinions due to lack of time or the complexity of what is analyzed.

Mechanical harvesting may result in timber damages leading to reduced saw log quality. The initiator of this study was VIDA ? a privately owned concern operating in the value-adding process industry of forest raw materials. The aim of this study was to examine the type and amount of damages on Alvestakubb caused by the harvester head during the cutting process. The aim was also to compare the damages caused by different types of feed rollers and to evaluate the effects of temperature on damage occurrence.