The forest in the county of Småland has been utilised for a long time. One of the most important forms of utilisation of wood has been charcoaling for the benefit of the iron industry. Shortage of forest in relation to the iron industry, was discussed already in the 17th century in Sweden. The aim of this study was to analyse the purchase and consumption of charcoal at Storebro Bruk, an ironwork in Småland, during the period 1793-1850, as well as analyse the shortage of forest at the time. To determine the utilisation of the forest in the area, I have used historical sources from Storebro Bruksarkiv.

In the Swedish Curriculum (Lpfö 1998, revised 2010) pedagogogical documentation constitute a big part. It is important that the childrens development and learning are documentated properly, both for the child itself, but also as an quality review and evaluation of the work that is made at the Preschool.In this study we have examined preschool teacher?s attitudes towards pedagogical documentation and how they work with it and use it in the daily work at the Preschool.We have also examined their own abilities to implement pedagogical documentation. For whom is the documentation made for? We also wanted to see if the children had any opportunity to influence the work.We have used a qualitative method and our study is based on six semi-structured interviews with six preschool teachers.

The purpose of this study is to explain how the value of sawn wood changes when sawn wood are cut in 30 respective 60 cm lengths. The raw material into the saw mill will mainly be bucked in 30cm and 60 cm modules. There will also be two alternatives where the timber will be bucked special lengths, 370, 490 and 550 cm but also in 490 and 550 cm.The method used for the study is to simulate both cutting and sawing the woods. For cutting the simulator Timan is used and for sawing the simulator Timberopt is used. When data is generatedfrom the simulators, calculations of some key figures is done and also how much the revenue need to be increased for the sawn wood in order to cover for the increased costs of changing sawn woodfrom 30 cm to 60 cm modulesThe conclusion is that the single biggest reason, impacting the value of the sawn wood is the cutting at the saw mill.When going from 30 to 60 cm modules, the impact will be that the customers to the saw mill must pay more to increase the revenue by at least 10% for the sawn wood in order to justifice the changein production.It is also possible to increase the value of the products further by bucking the timber in three lengths, 370, 490 and 550 cm, in order to get 12 % increase of the share of longer sawn wood (>= 480 cm)..

The aim of this study was to provide SCA Forest Norrbotten District with material to assist in their work towards decreasing the frequency of bucking splits in their saw timber logs. SCA Forest supplies the Munksund sawmill with pine timber. Periodically the sawmill experiences problems related to bucking splits in their logs. The purpose of this study was to find an available method to measure the occurrence of splits directly on incoming timber. The ambition was also to gain some knowledge about possible variations between different logging crews in terms of split frequency. If possible, this information could be used to investigate if certain crews produced more splits than others, and thereby making it possible to provide feedback to the logging machine operators. The study consisted of two major parts, a literature review, and a practical sawmill study.

The governing set of regulations for structural engineering in Sweden used to be Boverket, BKR. However in the beginning of the 21st century a changeover to new regulations, the Eurocodes, started.The transition was completed in year 2011 when the Eurocodes became the mandatory design work policy for all countries within the European Union. The Eurocodes were implemented to simplify and remove potential barriers to trade that may exist when countries have different design rules.  Since the changeover it has been important for all construction companies to update their knowledge base and their design software.When comparing the two calculation processes they seem similar, but there are a couple of differences worth noting.  With the new regulations, engineers will find that the process when designing joints in timber structures has changed.  What used to be a fairly easy and straight forward calculation procedure has now become tedious and time consuming.The objective of this degree project is to present a product, a dimensioning tool that will help structural engineers when computing lateral load carrying joints in timber structures.The degree project is made up of two parts where the first part is the written report describing the background and theory behind load carrying computations. The second part of the project is the actual dimensioning tool which includes several worksheets in Microsoft Excel. The program treats single and double shear connections of the following:Nail jointsScrew jointsSteel plates (thick and thin types) The user can edit the following parameters:Type of plate/ number of shearsStrength class of timber membersMember and plate sizeType of fastenerDiameter of fastenerLength of fastenerYield moment of fastenerkmod and partial factors for design load carrying capacityThe dimensioning tool was created and developed in collaboration with structural engineers at the company Byggteknik AB.

The purpose of the rebuild of Notnäs AB timber sorting line is to renew the existing drive and turning ends of the transport chain, which has become old. This means that Notnäs AB have problems to get new parts if the gearbox and chain are worn out. They also require that the rebuild should have a maintenance schedule for the new spare parts that will be used in the rebuild. Maintenance workers placed great emphasis on that in a rebuild it shall be a service-friendly design. The maintenance schedule used in Notnäs AB in the current situation is from Statoil and the report uses SKF formulas and recommendations in order to obtain a lubricating schedule.

The goal of this work is to get as good a basis as possible to explain what the owners want for products and services when those doing business with buying groups in Korsnäs purchases regions: Gävleborg, Dalarna, Uppland and Frövi. It should also provide Korsnäs knowledge of the most important factors to consider in business with the owners. Another important aspect is to find out what you have done better at the business with owners, to eventually be able to preserve and take them into account. 300 questionnaires sent out to randomly selected owners in these regions. This is to find out what the owners did not have the products/services of Korsnäs. 29 questions were asked in the affected areas to identify what was missing and to eventually be able to satisfy them.

The supply of raw materials has always been an important issue in the Swedish Forest industry. Buying timber from local suppliers is important. To ensure raw materials to their industries the forest company must offer good prices and good business deals to their suppliers. The aims with this work are to find out how the contact between private suppliers of raw materials and how the forest company can be developed. To be able to do a complete study of the problems connecting with this subject a quality interview study has been done.

Lattelement AB in Ornskoldsvik is one of the leading companies in Sweden in composite elements in walls, floors and roofs in particular. The company supplies elements to buildings located with a wide geographical variation, which means that the products are subjected to very different climate with regard to snow, wind and humidity. This places high demands and requires the elements to withstand large variable loads.The elements are made of lightweight beams with flanges of structural timber and beam webs made of OSB. These are bound together by nogging pieces with the same kind of structure. On top of the beams a nailed and glued plywood is added to absorb compressive forces and on the underside of the element a sheet of steel is added for tensile absorption.These elements are then attached to the building framework in different ways depending on the particular element height, loads and the structual supporting material of the frame work.

In this thesis a study about funding in civil-society organizations is carried out. The aim is to understand how an organization in civil-society is affected by different forms of financing models. The empirical material in the thesis consists of a case study of three Swedish civil-society organizations (CSO) producing social services in the field of rehabilitation of people with a drug addiction. The case study consists of mainly interviews with people holding a leading position in the three organizations together with a study of for the research question relevant documents. From the empirical material, including an extensive analysis of these organizations different income sources, a partial model of how to categorize and analyze different forms of funding in CSOs is developed.

In 2009 The National Land Survey of Sweden, Lantmäteriet, commenced a project intended to provide a new digital elevation model (DEM) of Sweden. The method chosen for the project was airborne laser scanning (ALS). In addition to information about the land surface the project will also provide information about the forest, this as a by-product. This data can be used to estimate forest variables such as height and volume. The estimates are often more reliable than what is standard today. This study is based on interviews with employees and members of the forest owner association Södra in southern Sweden.

Our examination project has been to develop today?s existing walking frames and make them more exiting and user friendly for tomorrow?s users.The use of a walking frame today makes it easier for a person with a movement difficulty in different extent. It makes it easier with their living condition and the user get a more movement easier life where they can take care of the daily chores without any help from the society or the family members.With our product we get a product that not only makes it easier for the user to get out and get forward. We help the user to get forward where they often would have difficulties to get forward. An example is where its more steeper parts where it could be more difficult to get up or down and even with more difficult foundation due to bad weather.

Extensive planting of the tree species lodgepole pine (Pinus contorta var. latifolia) during the 1970s and 80s has resulted in large areas now being available for commercial thinning. However, the varying quality of the stands creates a problem. The purpose of this study was to investigate, at the Torsby district of the Stora Enso forest company, how well the present computer records of the stands correspond to reality and determine which stands are, from a qualitative perspective, suited for timber production. Finding variables that indicate better stands would give Stora Enso the possibility of selecting qualitative stands which are more profitable to thin. The study included 32 stands containing at least 70 % Pinus contorta.

Title: Process description of round timber transports ? a case study at Tra?frakt Go?taland ABAuthors: Karl ? Johan Tern, Christian Johansson and Andreas IvarssonTutor: Anders JerrelingExaminer: Fredrik KarlssonBackground: Today the profitability of forest haulers is unsatisfactory. Negotiations on prices are more about the relative strength of the negotiation parties rather than a discussion about actual costs. Adding extensive changes in the forest haulers cost structure has led to insufficient knowledge of whether the negotiated prices really correspond to their costs.Methodology: We decided to carry out a case study at Tra?frakt Go?taland AB, a special interest organisation whose members represent the majority of forest haulers in Go?taland.Purpose: To describe the processes and underlying activities of round timber transports.

The number of sawmills in Sweden has decreased dramatically since the 1980s and the trend looks set to continue. The sawmills that are left instead becomes larger and are situated farther apart. In northern Sweden, they are concentrated along the coastline.In our study, we compared conditions for running a sawmill in inland areas and coastal areas and looked at what factors have the greatest impact on the profitability of the sawmill in northern Sweden.We chose to compare different locals conditions for a sawmill that only sawn pine timber and had an annual raw material requirements of 300 000 m3ub per year. By analyzing the kNN-data from the Swedish National Forest Inventory we have taken out the size of the timber volume at each site and its catchment. We have also looked at possible competitors in the areas that may affect the purchase price of the commodity.