The costs of logging and of transportation with truck are dominating the total cost of wood delivered at industry. To support the profitability for the members' forestry the processing and handling with the timber has to be as efficient as possible. Increased length of pulpwood in thinning is one conduct that can result in higher productivity and/or lower costs. The study is scaled as a system analysis with the aim to exemplify the differences between working with 3- and 4-meter as standard length of pulpwood, related to biological aspects, timber receipts, cost of logging and cost of transportation with truck. Important aspects are if the change is technically and biologically feasible and economically profitable.

Thinning is the partial removal of trees in a forest stand prior to final harvest. The term can be divided in pre-commercial thinning where little if any volume is removed from the stand and commercial thinning where removals are intended to provide a positive economic result. From a silvicultural point of view, the goal of thinning is to enhance future crop tree quality by removing low-quality stems and providing sufficient space for the accelerated development of retained ones (Huuskonen & Hynynen, 2006). The goals of this study was to see if commercial thinning could positively affect the short and medium term timber supply (MTTS) in the Interior regions of British Columbia (BC), and whether or not Scandinavian forestry practices could be adopted in the BC context. The mountain pine beetle (Dendroctonus ponderosae Hopkins) has created significant forest planning problems in BC. The annual allowable cut (AAC) was raised to capture beetle-killed timber while still merchantable.

Husqvarna is a world leading producer of chainsaws with a well-established brand name. Husqvarna now has an interest in investigating the possibiltiy to expand their production of chains and guide bars to include cutting equipment for timber-harvesters.This project is a technical study which aims to answer questions about cutting equipment for timber-harvesters that have been decided in cooperation with Husqvarna. The questions have mainly been focused on forces, cutting speeds, service and maintenance -as well as general questions regarding the size of the Swedish market.Two methods have been applied to answer the questions. Interviews with retailers of harvesters, producers of harvester heads and harvester drivers.The main findings in this project show that there is a relatively small selection of harvester chains on the Swedish market. In contrast to the selection of harvester chains the selection of guide bars is quite large.

This thesis describes a conceptual design of a support frame for a synchronousgenerator used in a vertical axis wind power plant. In this system the generator isplaced on ground level. The thesis also considers the design of housing for thesupport frame and generator. The concept presented in this report is based on anearlier design. Besides geometric design, simplified simulations has been run in orderto optimize some of the parts included in the construction considering naturalfrequencies and structural strength.The result is presented as CAD-models andan assembly drawing..

This thesis investigates how inventory management is practiced at a Swedish sawmill company, how practice differs from theory in this field and how the company could make more use of this theory. To do this we have performed a study on relevant literature and compared our findings with a field study on Moelven Valåsen AB. Our analysis shows that a large gap between theory and practice exists. We identify several reasons to this, including some sector specific problems when calculating cost rate for timber inventories. Suggestions on solutions to these problems and an example of how a cost rate can be estimated with relatively simple means are presented.

Earlier investigations showed that damages on timber from feeding rolls could be within the lower classes of damage according to VMRs classes. Knowledge about differences in productivity between kind types and aggressive types of feeding rolls is necessary because it should influence the question about damages on timber caused by different feeding rolls. In this study the production and timber damage in a harvesting head were evaluated at three levels of pressure (8, 10 and 14 MPa) on the feeding rolls, and with three different types of rolls. One type, the rubber cushioned steel plate roller had 10 mm studs and rubber damping, one ?middle? type made of solid steel with 14 mm studs, and one aggressive type, also made of solid steel with 18 mm studs.

I Sverige fanns, mellan 1874 och 1994, ett förbud mot att bygga bostadshus med fler än två våningar i trästomme. Under denna tid försvann större delen av hantverks- och ingenjörskunnandet och man fick därför börja från början då förbudet hävdes. Byggandet gick till en början trögt, men tog fart i och med regeringens nationella träbyggnadsstrategi och utvecklandet av byggande med massivträ i början av 2000-talet. Limnologen i Växjö är ett bra exempel på hur långt fram Sverige ligger i utvecklingen, men det pekar också på områden inom tekniken som behöver förbättras.Den här uppsatsen behandlar översiktligt hur trähusbyggandet har sett ut i Sverige och beskriver sedan Limnologen med fokus på entreprenadform, stabilisering, brandskydd och akustik. Vidare beskrivs hur massivträtekniken har utvecklats och hur byggsystemet för massivträ har tagits fram..

Large areas of Lodgepole pine (Pinus contorta var. latifolia) were planted in the 1970s - and '80s. The purpose of the fast-growing species was to increase growth and with short rotation periods allow a rapidly increased harvest level. Today a large proportion of the young forests owned by Holmen Skog, Iggesund are covered by Lodgepole pine and an active forest management is required to spread the harvested volume over time which is desirable by a market perspective. The purpose of this essay is to investigate the possibility of spreading the harvested volume of Lodgepole pine over time.

Huvudmålet med detta examensarbete var att undersöka om det för Södra timber är ekonomiskt hållbart att tillverka engångspallar till pelletsproduktionens tilltänkta säckningsanläggning i Långasjö, gentemot att köpa in engångspallar från en extern leverantör. Detta gäller då för 30 000 engångspallar om året.Intervjuer togs på Södra timber i Långasjö om vilket virke som var lämpligt från företagets sida att bli av med. Detta visade sig vara brädor av 19x75 mm och 75x75 mm. Dessutom beslutades i ett tidigt skede att en engångspall med måtten 1200x800 mm är en bra lösning då detta är europastandardens mått. Olika alternativ togs fram för hur man skulle kunna ta fram materialet och sänka produktionskostnaderna och avsåg då brädor 19x75 och klossvirke 75x75.

This study was based on measurements of growth and shape of 50 clones of wild cherry, Prunus avium L, in south Sweden and aimed at finding out wether or not any of these clones are useful for commercial propagation. Initially, a short assembly of documented knowledge concerning wild cherry as a timber producing tree species was put together. The study of the 50 clones includes information gathered during the fall of 2006 from four trials located in the counties of Blekinge, Småland and Västergöland. The oldest trial, founded in Tranemåla, Blekinge, in 1992, was focused on offspring and aimed at discerning differences between provenances and at developing an adapted plant material. The other experiments were both clone trials and founded in 2002. These are based on 50 individuals selected from the offspring trial in Tranemåla.

Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.

The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.

The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.

This study is done on behalf of Södra skogsägarna in the autumn of 2012. The main purpose of the study is to get an explanation to why some of the members are passive in their forestry, and how Södra can stimulate them to become more active. To achieve this a questionnaire study was conducted on the members of Södra in the community of Gislaved. The result of the study shows that there are many different factors that influence whether the forest owner is active or not. Examples of those factors are timber prices, the forest owner's objectives and the forest owner's financial situation. The main goal for the forest owners in the survey was to obtain high economic result and to increase the standing timber volume for the next generation.

The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.