Fortifikationsverket which is the landlord for the Swedish national defence has a great problem in their forestry due to the relatively large amount of metal objects in their timber. These metal objects cause different types of economical losses in the timber refinement chain. To enable out sorting of logs containing metal objects already in the harvesting phase, Fortifikationsverket is interested of the possibility to utilize some type of metal detector in a harvesting head for that purpose.The goal of this study was to, with help of a case study, enlighten the problem that metal objects in timber cause for Fortifikationsverket and their customers of timber and to investigate conditions of to mount and utilize some kind of metal detector in a harvesting head at present.The saw timber deliveries by Fortifikationsverket during the time period 2003-2005 was used as a reference volume for calculations of economical losses. In this case study was included two sawmills where timber from Fortifikationsverket were delivered to for further refinement. Factors investigated were the type of damage metal objects caused in these two sawmills and the economical signification of these damages.

Birch is the dominant deciduous tree species in Sweden but only 16 % is found in pure birch stands. The majority of the birch (51 %) is to be found in conifer dominated stands. Swedish forest land comprises approximately of 23 % mixed stands and one problem is that for mixed stands there are few management recommendations. The underlying aim of this thesis was to study the management of mixed forest stands of spruce and birch to achieve good timber quality of birch. The study was based on a literature study and measurement in a field experiment launched in 1998 by the Swedish University of Agricultural Sciences (SLU).

The efficiency of the harvesters work is more often reviewed, than the work of the forwarders. In a local Stora Enso office the differences between the harvesters reported volume of timber, and the actual volume delivered to the industry had been noticed. Therefore, the decision was made to do a review on the forwarders work. The review was conducted together with a worker from Vmf Qbera, who is working daily with wood measurement, in order to get a valid evaluation of the logs. Eight sites were included in the survey, and on each site 50 logs were marked. Approximately one third of the marked logs were pulpwood, and the remaining logs marked were timber.

Femsjö is a small parish situated in Hylte municipality, Växjö diocese. The parish has a total area of 8230 ha of which 5000 ha are covered with forest. There have not been any large industries in the parish offering work opportunities for the inhabitants, so they have had to generate income from their land and the forest. Instead of going to the bank to get a bank loan the people of Femsjö parish went out in to the forest and harvested trees for timber and extra cash revenue. Production of pine tar and potash were two other ways that the residents of Femsjö parish could earn extra money for the household in order to keep starvation away.

Seventy-two working horses (they had been ridden with bit and bridle within the last two weeks) were examined in the oral cavity. Findings and status were noted. The horses were randomly chosen among individuals without clinical symptoms from the mouth and gastrointestinal system. The result showed that 93% of the horses had changes in the mucus membranes, 86% in the form of ulcerations. The P2 region was most commonly affected followed by wounds more caudally in the mouth (P3-M3 region).

A prefabricated timber frame house previously built by Villafabriken AB has been modeled in Autodesk Revit Architectural, a 3D-program based on BIM-technology. This has been done tosee if it?s possible to produce the publications that Villafabriken demands from the designengineer?s work, and examine which possible extra values that may arise compared to traditional 2D-CAD drawing.BIM is short for Building Information Modeling. Everything is stored in a single database and a change in the project file is automatically updated across the project. BIM provides more than just drawings since information from the model can be retrieved in various ways such as lists and quantity schedules.It was possible to produce the publications that Villafabriken demanded using Revit, but BIM doesn?t only mean a new way of drawing, it also require a change in the company?s process were the information from the model is being used..

Stenebergs sockerbruk is a large log-timber construction, purpose built as a sugar refinery in 1739 and is one of Sweden's oldest industrial buildings constructed entirely out of wood. Despite receiving the status of a listed building (in Swedish: Byggnadsminne) in 1977, there exists today a surprisingly low amount of documentation of the building itself. In order to enhance the existing and lacking building documentation, this case study aims to shed light on the building's log-timber built frame, focusing on how it was constructed, how the long lengths of its walls were handled and what type of joinery and tools were used. A thorough investigation of the building is conducted on site, followed by gathering of information which is then presented through text and illustrations. The findings indicate the orientation of timbers, location of joints and scarfs as well as tool marks which together contribute to the forming of a basis of understanding of the building's construction..

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

Transportation represents 10-15 % of wood supply costs. It is therefore important to improve efficiency in the transport system to decrease these costs. The aim of this study is to map the timber vehicle routing processes used by a sample of timber hauling contractors and to identify possible links between the vehicle routing process and service and economic variables. The study was carried out at Södra Skog in autumn 2008. 15 timber hauling contractors were sampled and interviewed about their work with timber transports.

This study was performed in collaboration with Moelven Skog AB, Örebro district. The purpose of the study was to review existing literature in order to describe the current status of harvester based measurement technology as the way to provide information for calculating payment to the forest owners. In addition to this, a short survey was conducted to find out how a switch to harvester based measurement would affect the administrative workload on timber purchasers working for the district. The literature study shows that the harvester measurement technology is ready to use if it is combined with well-established routines for control of the harvesters, methods for automatic quality indexing of the timber and ways of creating pricelists specially adapted for harvester measurement. Pricing each stem seems to be the most promising method. Stem pricing has several benefits.

Rundviks sågverk investerade vintern 2007 i systemet GPS Timber. Systemet som är GPS-baserat syftar till att underlätta timmerhanteringen och säkerställa att rätt timmerklass läggs i vältorna och på sågbordet. Dessutom samlar systemet fortlöpande in data angående truckarnas aktiviteter för att möjliggöra analys av vad som sker på timmerplanen.Studien syftar till att undersöka vad införandet betytt för truckförarnas arbete med timmerhanteringen samt vad systemet har för effekt på ekonomin. Med hjälp av insamlad data av GPS Timber ska analysen dessutom resultera i potentiella effektiviseringsområden rörande timmerhanteringen för att förbättra ekonomin i en relativt dyr process. Analysen har visat att truckförarnas arbete har förenklats mycket i och med införandet av GPS Timber.

Illegal logging and its related trade is of great concern around the world. The European Union Timber Regulation (EUTR) is a regulatory approach by the EU to prevent illegal timber and timber products to be placed on the European Union inner market. This means the regulation affects both actors in the member countries as well as the actors exporting timber and timber products to the EU from non EU member countries. This study aims to study the implementation process of the EUTR in Bosnia and Herzegovina (B-H), and its preconditions. Institutional theory is used to understand and explain how the EUTR affects B-H organisations? business environment, and how the organisations choose to respond to the EUTR.

Mechanical harvesting may result in timber damages leading to reduced saw log quality. The initiator of this study was VIDA ? a privately owned concern operating in the value-adding process industry of forest raw materials. The aim of this study was to examine the type and amount of damages on Alvestakubb caused by the harvester head during the cutting process. The aim was also to compare the damages caused by different types of feed rollers and to evaluate the effects of temperature on damage occurrence.

Ala sawmill in Ljusne, Hälsingland, has increased its flow through the sawing plant during the last couple of years. The problem now is the sorting plant, as this part of the mill is now slower than the rest. A close analysis of the sorting plant was therefore necessary to be able to increase the flow through. The aim of the project was to find solutions that can lessen downtime and increase flow. The goal was to increase the flow from 650 to 925 logs through the sorting plant per hour.

The aim for this study where to investigate the frequency of cutting cracks in saw timber harvested in the storm-damaged forests in regions where the storms Hilde and Ivar hit. The idea for this work came from one of the region?s biggest actors, SCA Skog and Jämtlands district. The purpose where to find out how big proportion of the saw timber that contains cutting cracks, their financial cost in lost wood value and also give advice and suggestions on how to work against the frequency of cutting cracks. For the field-study some guidelines where used to make sure that the samples were taken under the same conditions, they were: ? The field-study must be performed under harvesting of storm-felled forest, which are horizontal/inclined trunks. ? The averaged sized tree will make it possible to harvest saw timber. ? The trunks can?t be root cut. A methodology called in Swedish ?Trissmetoden? was used because it is the most frequent used methodology in earlier performed studies and the only one that can be used I field. Under the field-study data were collected from 570 saw timber logs, 30 logs from each one of the tested harvesters.