The purpose of this report is to investigate and compare the difference between stand-thinning machines and strip-road thinning machines, and how they affect the stand on behalf of future growth, theoretical economic result, wind impact, snow pressure and density of stand. The investigation is regarding the first commercial thinning of pine stands, after pre-commercial thinning that was well conducted. The investigation area was located near Katrineholm, Sweden. The measurements that were measured were strength of thinning and amounts of wind throws, snow-breaks and hauling damages. The results that emerged, was that thinning with strip-road machines had a significantly higher strength of thinning over all, as compared with the stand- thinning machines (45 percent versus 30 percent). Comparisons between wind-throws, snow-breaks and hauling damages of the stand could not establish any significant differences between the two methods that were investigated. Conclusions, over all, were that if forest owners want to have more timber volume left for second thinning and final cut of the stand, the forest owners should choose the method with stand-thinning machines. From the point of view of gentle treatment of the stand and ground damages the choice should be the same. However, the method with strip-road thinning machines is the most common and accessible method in Sweden. Most likely it is the most economical way to manage the stand for forest owners in present time. If the method with stand-thinning machines is becoming more common in Sweden, it is suggested for forest owners to consider the stand-thinning method as a candidate for treatment due to economic aspects..

This thesis is about the effects of fertilizing and thinning on furniture timber from redwood. Interviews of furniture manufactures have been made and observing of timber from the Swedish fertilizing and thinning trails. The result from the interviews showed which properties that is important for the furniture manufactures and then the result from the observation showed which type of management of the forest that gave the most timber that had those properties. .

This thesis is based on a market survey sent to the passive members of Södra skogsägarna within the scope of practice of Vimmerby. A member of Södra skogsägarna is considered passive if the member not has delivered timber to the association during the past five years. The purpose of this thesis was to obtain as much information as possible about the forest owners, to be able to interpret why the member did not choose to deliver their timber to the association. The survey was worked out in close collaboration with Södra skogsägarna to answer this question. The responses indicate that economic returns are important to the individual landowner. The price of timber is most important in a timber business and the majority of forest owners want to have a personal meeting if you can choose how you wish to be contacted by the inspector.

Rules for damages that are effective are important to create legal security and a public procurement that fulfil economic effectivity. Those rules are effectivly created for example when the demand of evidence is possible for the damaged supplier to fulfil. Yet the rules cannot be too low without leading to an uncertain procurement for the public purchaser. Thus one have to balance the interests of a public purchaser against the interests of a damaged supplier. This balance leads to a public procurement involving rules of damages where the public purchaser cannot escape duty of damages just because the demand of evidence is too hard to fulfil..

Penalty clauses is a term that can be put in an agreement and is an amount that shall be paid by a part of the agreement if they cause any damage to the other part by breaking the agreement. Penalty clauses have since around 100 years ago had a quite clear meaning in Sweden according to a lot of authors. These authors have the opinion that penalty clauses is an exclusive judgment of the compensation the victim has right to, that means that if the parties have put a lower amount in the clause the victim won?t get full coverage for the damages caused by the other party. That the penalty clause is an exclusive judgment of the victims right to compensation means that the victim doesn?t have the right to request other compensation above the compensation in the clause if nothing else is stated in the clause.A penalty clause may be viewed as a complement to compensation you get according to The Tort Liability Act (1972:206) where it is often difficult to obtain full compensation for damages when it is required that a number of conditions are to be met for damages deleted.

Birch is the dominant deciduous tree species in Sweden but only 16 % is found in pure birch stands. The majority of the birch (51 %) is to be found in conifer dominated stands. Swedish forest land comprises approximately of 23 % mixed stands and one problem is that for mixed stands there are few management recommendations. The underlying aim of this thesis was to study the management of mixed forest stands of spruce and birch to achieve good timber quality of birch. The study was based on a literature study and measurement in a field experiment launched in 1998 by the Swedish University of Agricultural Sciences (SLU).

The efficiency of the harvesters work is more often reviewed, than the work of the forwarders. In a local Stora Enso office the differences between the harvesters reported volume of timber, and the actual volume delivered to the industry had been noticed. Therefore, the decision was made to do a review on the forwarders work. The review was conducted together with a worker from Vmf Qbera, who is working daily with wood measurement, in order to get a valid evaluation of the logs. Eight sites were included in the survey, and on each site 50 logs were marked. Approximately one third of the marked logs were pulpwood, and the remaining logs marked were timber.

Femsjö is a small parish situated in Hylte municipality, Växjö diocese. The parish has a total area of 8230 ha of which 5000 ha are covered with forest. There have not been any large industries in the parish offering work opportunities for the inhabitants, so they have had to generate income from their land and the forest. Instead of going to the bank to get a bank loan the people of Femsjö parish went out in to the forest and harvested trees for timber and extra cash revenue. Production of pine tar and potash were two other ways that the residents of Femsjö parish could earn extra money for the household in order to keep starvation away.

The effects of Reindeer mechanical damages on the planted regeneration of Pinus sylvestris and Pinus contorta. Semi-domesticated reindeer can damage young trees. In late winter reindeer rub their antlers against young trees. The aim of this study was to quantify those damages. This study covered planted objects from three different areas in northeastern Sweden.

A prefabricated timber frame house previously built by Villafabriken AB has been modeled in Autodesk Revit Architectural, a 3D-program based on BIM-technology. This has been done tosee if it?s possible to produce the publications that Villafabriken demands from the designengineer?s work, and examine which possible extra values that may arise compared to traditional 2D-CAD drawing.BIM is short for Building Information Modeling. Everything is stored in a single database and a change in the project file is automatically updated across the project. BIM provides more than just drawings since information from the model can be retrieved in various ways such as lists and quantity schedules.It was possible to produce the publications that Villafabriken demanded using Revit, but BIM doesn?t only mean a new way of drawing, it also require a change in the company?s process were the information from the model is being used..

Stenebergs sockerbruk is a large log-timber construction, purpose built as a sugar refinery in 1739 and is one of Sweden's oldest industrial buildings constructed entirely out of wood. Despite receiving the status of a listed building (in Swedish: Byggnadsminne) in 1977, there exists today a surprisingly low amount of documentation of the building itself. In order to enhance the existing and lacking building documentation, this case study aims to shed light on the building's log-timber built frame, focusing on how it was constructed, how the long lengths of its walls were handled and what type of joinery and tools were used. A thorough investigation of the building is conducted on site, followed by gathering of information which is then presented through text and illustrations. The findings indicate the orientation of timbers, location of joints and scarfs as well as tool marks which together contribute to the forming of a basis of understanding of the building's construction..

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

Transportation represents 10-15 % of wood supply costs. It is therefore important to improve efficiency in the transport system to decrease these costs. The aim of this study is to map the timber vehicle routing processes used by a sample of timber hauling contractors and to identify possible links between the vehicle routing process and service and economic variables. The study was carried out at Södra Skog in autumn 2008. 15 timber hauling contractors were sampled and interviewed about their work with timber transports.

This study was performed in collaboration with Moelven Skog AB, Örebro district. The purpose of the study was to review existing literature in order to describe the current status of harvester based measurement technology as the way to provide information for calculating payment to the forest owners. In addition to this, a short survey was conducted to find out how a switch to harvester based measurement would affect the administrative workload on timber purchasers working for the district. The literature study shows that the harvester measurement technology is ready to use if it is combined with well-established routines for control of the harvesters, methods for automatic quality indexing of the timber and ways of creating pricelists specially adapted for harvester measurement. Pricing each stem seems to be the most promising method. Stem pricing has several benefits.

Detta arbete behandlar mätteknik vid kontroll av dubbskadedjup på sågtimmer. Mätmetoder och mätverktyg har sammanställts och bedömts som lämpliga för olika mätsyften. Data rörande skadedjup från olika dubbtyper har sammanställts ifrån tidigare publicerade studier. Resultat från en egen kartläggning av dubbskadedjup på gran- och talltimmerstockar styrker en allmänt rådande uppfattning: Att de djupaste dubbskadorna uppstår närmast centrum av matarhjulens anliggningsyta mot timret om matarhjulen inte konstruerats med hänsyn till att utjämna matningskraften runt en så stor andel av stockens yta som möjligt. Eftersom heltäckande mätning av dubbskadedjup är tidsödande finns behov av att rationalisera mätproceduren.