We aim to investigate the risk exposure against commodity prices in the forestry and paper industry. The intension is also to study the affect that the changes in commodity prices has on a company?s market value..

Horse keeping is gaining an increasing interest in Sweden. During 2004 to 2010 the number of horses increased with 10 - 20 %, and was estimated to be 362 700 in 2010. Julmyra Horse Center (JHC), situated in Heby municipality, is a gated community for people sharing a large interest for horses and a vision of a sustainable horse management has been formulated. This study evaluates how the horse keeping of today at JHC, and how an expansion of the horse keeping may affect the risk of enhanced phosphorus load to the nearby lake system Vansjön ? Nordsjön.

The low bearing capacity of roads during the spring thaw and periods in the autumn leads every year to increases costs for Holmen Skog. To reduce costs and increase accessibility Holmen Skog decided to install and test a CTI-system. Central tire inflation (CTI) is a system that makes it possible to monitor and vary a vehicle?s tire inflation pressures from the cabin, while the vehicle is in motion. When tire pressures are reduced, the area of the contact surface between the tire and the road increases, thus reducing the ground pressure. The purpose of this study was to evaluate the CTI-equipped vehicle and analyze if the CTI technology is economical defensible during the thaw 2005.

This study was made for the round wood transport company MT Transport AB. Time studies were made in order to analyze time consumption on the mill site for timber trucks delivering round wood at the Södra Cell Mörrum mill. The most interesting was to see how much of the time spent at the factory that was waiting time. In three weeks the study was going on and the drivers were clocking it themselves..

This thesis investigated the possibilities to resume cultivation of an old manor house built of timber and what this would mean from an energy and moisture perspective. The building in this case study is named Sofiedals mansion and was built in 1858 in Valbo 11 kilometers west of Gävle.The structure of the house was documented and used as a starting-point for carrying out calculations focused on energy and moisture aspects. With the help of a number of computer programs and a conducted air tightness test, the buildings energy consumption were calculated and compared with the current building regulations.In addition, the building was analyzed considering energy retrofitting and what it meant for moisture problems. The energy retrofitting consisted of additional insulation, decreasing the buildings permeability through air sealing; window and door replacements. When a building is equipped with natural ventilation it is difficult to know its precise performance and how an energy retrofitting affects it.

In Europe poplar plantations has been planted for more than one hundred years. In the first plantation was made in 1940. The interest for poplars has since then shifted over the years and has for long periods been very low but is now slowly increasing again. The main reasons why poplars are becoming more interesting are because of their great production potential. Nevertheless, the knowledge of how to mange poplars in Sweden are very low and very little research has been done concerning management of the species. The objective for this study was to; 1) investigate and document experience and results obtained in practical Swedish forestry, 2) to give a fair picture of the perceived advantages and disadvantages that the poplars has for the forestry, 3) document what the foresters that has experience and those who has no experience of poplar plantations thinks about the potential of poplars.

Prescribed burning was commonly used for site preparation in Sweden to establish new forests until the 1960?s, when mechanical scarification was introduced. During recent decades the interest in prescribed burnings has increased again, mainly due to certifications of forestry stating that 5% of the regeneration areas should be burned on dry and mesic soils. The objective of the study was to evaluate actual influence of prescribed burning compared to other site preparation on stand stem density, growth parameters and tree damages for Scots pine (Pinus sylvestris L.) after direct seeding and planting. The study also attempts to simulate growth until first thinning.

The background to this study is that the forest company, Holmen, has found large discrepancies between harvested volume and the measured volume at the industry. Factors like bark features, breakage, double tops, bends and stem damages was noted, and all stems were measured manually. Hypothesis testing with the method "random in pairs" were used to examine whether the harvester measured values significantly differed from the manually measured. The result of a properly calibrated harvester shows in average underestimation of the volume with Skogforsk Pine as a bark function. This means that the harvester isn´t the reason why the volume measured in the industry is lower, the fault is elsewhere. The study also indicates a need for a unique bark function for logepole pine..

Chinas government has a multifunctional program for a more sustainable forestry since 2000. This six key forest programs goal is to develop a more sustainable forest sector but also take environment consideration. The state forest administration in China has decided to create 5.8 million hectare of fast growing and high yield forest. Eucalyptus has showed to have good properties for pulp and timber production and therefore Eucalyptus plantations are under development in costal areas in southern China. By adding extra nutrients, growth can be enhanced in Eucalyptus plantations.

This final project is an investigation about the responsibility in rooms where the walls and floors are exposed or partly exposed to irrigation of water, as a bathroom, laundry room and WC. The cost for all water damage is valued for 5 000 000 000 SEK each year. How is this possible with all information about the problem and good materials? Who is responsible? Incites had been made in the subject throw reading reports and participation in courses about how to make a room mention above. Discussions have been made with workers in the trade of making the walls waterproof.The conclusion in the rapport is about who´s responsible for the damages and will pay the cost of the renovation. The responsibility is discussed between the contractor and the insurance company.

Examensarbete G3 i företagsekonomi, 15 hp, Ekonomihögskolan vid Växjö universitet, Logistik, FE3583,VT 08.Författare: Stefan Knutsson, Linda Nilsdotter, Martin Svensson.Handledare: Helena ForslundFöretagets kontaktperson: Lars WoxnerydTitel: Södra - En studie om koldioxidutsläpp från externa transporterBakgrund: En mycket aktuell diskussion i dagens samhälle är klimathotet och människans negativa påverkan på miljön. De växande kraven på miljöarbete i företag gör att de ständigt måste utvecklas. Södra Timber har idag en uppskattad siffra på dryga 13 000 ton koldioxid som släpps ut vid distributionen av sågade trävaror. En siffra som i nuläget inte är helt tillförlitlig då schablonerna och beräkningarna är föråldrade.Syfte: Studien syftar till att kartlägga Södra Timbers koldioxidutsläpp vid kundtransporter genom att använda sig av en bättre beräkningsmetod som uppsatsen skall arbeta fram. Studien syftar också till att identifiera möjligheter till förändringar i distributionen med hänseende till koldioxidutsläpp och ekonomi.Avgränsningar: Uppsatsen är avgränsad till att endast behandla transporter som sker från sågverken i Långasjö och Mönsterås.Metod: Uppsatsen inleds med fördjupade teoretiska studier för att möjliggöra analys av det empiriska materialet.

During the period 1952-2008, real prices of wood before taxes and charges declined. However, the actual net income has not changed by the same percentage as the price list, because taxation, driving costs and the ability to make deductions has changed. This report considers the inflation by using the Swedish consumer price index. Net income refers to the remaining income when relevant costs, taxes and fees have been paid.The purpose of this study was to examine how the private forest owner's real net income has evolved over the period 1952-2008 for three categories of forest owners. These three categories are1.

This MSc thesis is divided into two parts. The first part deals with the need for information from forest campartments selected for clear cutting, in connection with planning in an integrated forest- and sawmill enterprise. A review of literature is followed by a case stud y, where present conditions in a Swedish forest company are compared with current research in the area. The seeond part consists of a simulation stud y, which aims at camparing the accuracy of inventory estimates using different methods. The estimates are delivery forecasts, covering one month consumptian of timber in a large sawmill.

This thesis is made on behalf of SCA's Forestry Division and is a comparison of two bucking simulation tools: Aptan (manufactured by Skogforsk) and Best/upr (from Berget Systemdesign). The data is based on 32 stands from SCA's forests in Norrbotten and Västerbotten. The objective is to compare the simulations created by the tools with the harvested volumes from those stands. Three variables are needed for the bucking simulation; these are the diameter distribution (at breast height), the relationship function between diameter and height, and the taper coefficients. The volumes of five different assortments from the stands are compared.

The primary purpose of this study has been to investigate the Swedish timber industry?s perception of compression wood. A secondary aim has been to describe particular areas within the production process where compression wood is likely to cause problems. This study has mainly been carried out as a questionnaire. In order to connect the findings to current research, additional information has also been collected by means of a literature review. The questionnaire has been intended for sawmills and wood-manufacturing companies from various production classes and owner categories, as well as from different parts of the country.