Topping is a precommercial thinning (PCT) method where secondary stems are cut higher above the ground compared to conventional PCT. The secondary stems continue to live for a period and are supposed to compete with the main stems and promote their quality.The objective of the study was to compare the effect of PCT on height and diameter growth between topping and conventional PCT. The study also analysed the relationship between height and diameter growth and the number of stems after PCT.Nine topped stands and six conventional precommercially thinned stands were visited between February 28th and March 5. One sample plot per hectare was laid out in the investigated stands. In every sample plot the number of stems was counted and five main stems were measured for height, height growth since PCT, diameter and diameter growth since PCT.The results showed significantly higher effect on height growth after topping as compared to conventional PCT but no significant difference in the effect of diameter growth between topping and conventional PCT.

The storm Gudrun January 8-9 2005 felled about 70 millions cubic metres forest in southern Sweden. The majority of the wind damaged forest was spruce (Picea abies). In order to decrease the risk of wind damages in the future other trees species are of interest for forestry in southern Sweden. The purpose of this master thesis was to study if larch were more wind tolerant than spruce. The method was to compare larch, Japanese larch (Larix kaempferi Lamb.), European larch (L.

Successful forest regeneration is a prerequisite for sustainable forest management. Therefore, it is important to prevent browsing damage on the commercially important tree species Scots pine. In this study I have tested a new alternative way to increase the available amount of forage and increase the use of these resources by especially moose. The method is based on a slash treatment at harvest, where the accessibility of slash as forage is increased during final felling or commercial thinning by gathering the slash and putting the Scots pine slash on top of the slash piles. This study has compared the availability of forage, the amount of browsed biomass and the number of fecal pellet groups between conventional and slash treated stands after final felling and commercial thinning in southern Sweden.

The aim of this study is to describe a number of type stands of lodge pole pine in Norrbotten with respect on stem volume and total biomass. Further questions to answer is if there is stand characteristics that make the stands more suitable for pulpwood in early thinning, or if it is better to apply whole tree harvest. The study shall also give an indication if bio energy can be an economical interesting alternative for Sveaskog. Sampled trees represented the variation in the different stands. Five trees were selected from each stand to represent that stand. Stem volume and biomass (kg dry weight (DW) per hectare) for each fraction was calculated.

SCA Skog has taken the initiative to this Master?s thesis. Today SCA Skog has a great need to update their informtion on young forest stands across large areas. Traditional field inventory methods for updating stand databases are expensive and time consuming. However, the inventory could be made more efficient if stand boundaries and stand characteristics are derived from aerial photographs.

Root rot causes large economical losses for Swedish forestry. The spread of root rot can partly be prevented by treating the spruce stumps in thinnings. Late pre-commercial thinning (PCT) is one of the forestry measures where stump treatment is not used. Late PCT can be defined as: The act of cleaning the stand with the aim of improving accessibility and sight within the stand, and so to increase the mean stem´s volume during the first conventional thinning. The aim of this study was to examine how late PCT is performed, its spatial extent and if it aids the spreading of root rot. The study was limited to encompass late PCT before first conventional thinnings in spruce stands in southern Sweden. Samples of spruce stumps were taken from four stands where late PTC had been carried out.

To guarantee the customers a job satisfactory executed Sydved has been certified by the ISO 14001 standard. One part of the certification is the standards of soil damages. The soil damages were over represented during 1999 and 2000. It was therefore a need to study the problem in order to see what could be done to reduces these damages. A filed study was carried out on 21 subjectively selected stands from the following five districts: Vänersborg, Falköping, Borås, Jönköping and Åseda. As the study is a descriptive study of the soil damages, their character and extension, only stands were tracks were reported were considered.

Thinning is the partial removal of trees in a forest stand prior to final harvest. The term can be divided in pre-commercial thinning where little if any volume is removed from the stand and commercial thinning where removals are intended to provide a positive economic result. From a silvicultural point of view, the goal of thinning is to enhance future crop tree quality by removing low-quality stems and providing sufficient space for the accelerated development of retained ones (Huuskonen & Hynynen, 2006). The goals of this study was to see if commercial thinning could positively affect the short and medium term timber supply (MTTS) in the Interior regions of British Columbia (BC), and whether or not Scandinavian forestry practices could be adopted in the BC context. The mountain pine beetle (Dendroctonus ponderosae Hopkins) has created significant forest planning problems in BC. The annual allowable cut (AAC) was raised to capture beetle-killed timber while still merchantable.

The main purpose of this study is to investigate the needs of pre-commercial thinning on private owned forest properties, which is considered to be increasing. The reason is believed to be the high cost of labor that pre-commercial thinning brings. Furthermore thinning is costly, the revenue created through pre-commercial thinning are post-poned until the first thinning. The study was made through a survey among members of Mellanskog forest owners association. The survey was distributed by e-mail. The time to answer was set to two weeks. The answers indicate that the most common reason why the pre-commercial thinning is delayed, or not done at all, is the forest owner?s lack of time.

Large areas of Lodgepole pine (Pinus contorta var. latifolia) were planted in the 1970s - and '80s. The purpose of the fast-growing species was to increase growth and with short rotation periods allow a rapidly increased harvest level. Today a large proportion of the young forests owned by Holmen Skog, Iggesund are covered by Lodgepole pine and an active forest management is required to spread the harvested volume over time which is desirable by a market perspective. The purpose of this essay is to investigate the possibility of spreading the harvested volume of Lodgepole pine over time.

Today Holmen Skog finds and selects suitable Thinning stands using data on upper height and basal area. These figures are often based on basic forest data that has been updated with the help of growth prediction models. The problem is that these figures are not always correct. The aim of this study was to investigate if a combination of data from a profiling laser and a digital camera for low elevation photography, can be used for collecting data on number of stems per ha, tree species mixture as well as basal area weighted mean height and upper height for stands. The possibility to use these data to assess the need for thinning cutting was also investigated.Laser data and aerial photographs were collected from a helicopter operating at an approximate height of 100 meters.

This master thesis project is a part of a project called ?Järboprojektet? at the regional board of forestry, the district of Gästrikland. The project will give answers to questions regarding if an analysis of satellite images can be used to contact and inform landowners of the located areas where precommercial thinning is useful. The whole project is a part of the National Board of Forestrys IT-stake where the analysis of satellite images will, at the latitudes possible, be adapted to each district in purpose to identify these areas in need of precommercial thinning. This master thesis project is based on a field inventory of identified objects where precommercial thinning is useful.

Nowadays the majority of the thinnings made in Swedish forests are done by machines, harvesters and forwarders. The most common model in thinning with a harvester is strip-road operated thinning and stand-operated thinning with one intermediate passage between the strip-roads. This study is a time study with some quality follow ups on a strip-road operated thinning model, a stand-operated thinning model with one intermediate passage between the strip-roads and a stand-operated thinning model with two intermediate passages between the strip-roads. The machines in the study were a small harvester (Forestline MPM C90) and a medium sized forwarder (Timberjack 1110). The study was made in Litsnäset outside the city of Östersund in Sweden and was made during the autumn 2007. In a lodgepole pine stand six study units (0,6 ha) were thinned with the three different models, two study units per model.

The aim with this study was to investigate mortality in older respectively younger beech stands (Fagus sylvatica), the different types of dead wood in the forest and the availability of coarse woody debris (CWD). The research was carried out in previously managed and seminatural stands in Biskopstorp and Frodeparken, located north of Halinstad in Halland,Sweden. Data were collected from 22 stands with at least 50 % beech and with a minimum age of 5 1 years, ranging in size from 0,67 to 19,9 ha. A transect was placed in each stand, in which the diaineter on both dead and living trees with a minimum diameter of 50 mm was recorded. On seven to 13 dead trees, depending on the size of each stand, decomposition stage, primary and secondary cause of death, amount of fungi and the type of the dead wood was noted.

This thesis includes a review of scientific studies of tree injuries following mechanized thinning. Interviews have been made with drivers of single grip harvesters and forwarders in forest thinning and a number of essential factors have been identified as the most important to take into account in order to minimize and/orprevent injuries to stems and roots of remaining trees..