Personalen är företagens viktigaste tillgång är ett vanligt förekommande uttryck och kompetens anses idag utgöra en förutsättning för goda resultat och framgång (Björklund & Holmqvist, 1999; Johansson & Johrén, 2011). Det kan dock vara svårt att konkretisera ökade kunskaper i samband med utbildning, vilket kräver en diskussion angående hur verksamheten och medarbetare påverkas. Få organisationer har idag strukturerade system att spåra och upptäcka det värde och de positiva effekter som en investering i kompetensutveckling kan medföra (Chong et al., 2000). GKN Aerospace Sweden AB arbetar aktivt med ett utbildningsverktyg för kompetensutveckling som benämns "Training Days". Syftet med dessa utbildningsdagar är att med hjälp av interna lärare utbilda personalen för att höja kompetensnivån och för att uppmuntra till kunskapsutbyte.

This Master?s Thesis aims to illustrate in what ways the two Swedish environmental assessment tools, the Environmental Load Profile and EcoEffect differ and if performed valuations gives different results and environmental goals.The built urban environment causes about half the environmental loading in Sweden. The society?s ambition towards sustainable development has resulted in demands reducing the environmental load. One way to accomplish this change is with the assistance of tools for environmental assessment of the built environment.

This thesis work has been performed on request by SWT (Scandinavia WeldTech AB). SWT manufactures, develop and sell ready to assemble building systems for concrete rafter beam applications. The beams in this system consist of a u-beam that is welded to a flange. To be able to fill the beams with concrete there is holes in the beams top end. The holes are made in a ?punching machine?.  These holes are cut out and the remaining steel piece is bent down in the u-beam.

A large part of the interactions between horse and rider during horseback riding takes place through the reins and the bit and devices for measuring the tension on the reins, rein tension meters, has fairly recently been developed. To safeguard the welfare of the ridden horse riders need to be aware of the rein tension they apply and actively work to decrease it. Furthermore, there is a need to develop the study of rein tension through new techniques and refined analysis procedures. A good-quality rein tension meter should be small in size, sensitive, durable and as accurate for light rein tension as for strong forces. Rein tension meters used in research on horse and rider interaction commonly depend on strain gauge technique for generating rein tension data.

Populärvetenskaplig sammanfattning: Målet med studien är att se vilka samband som finns mellan insamlad fältdata och beräknad satellitdata för bokskogsbestånd i södra Sverige (Häckeberga naturreservat och naturområde).Fältdata som använts består av uppskattat bladyteindex, beräknad biomassa samt kategoriserade åldersgrupper av 19 provytor bokskog (Fagus Sylvatica), indelat i tre grupper. Provytorna är 2025 m2 och består av homogen bokskog som motsvarar 3*3 pixlar i satellitdata.Skogens bladyteindex uppskattas med hjälp av registrerad data från instrumentet LAI-2000 Plant Canopy Analyzer. LAI-2000 registrerar förhållandet mellan den strålningsmängd som når toppen av vegetationstäcket och den strålning som transmitteras ner genom bladverket. Definitionen av bladyteindex är den sammanlagda bladarean (m2) per markarea (m2) och är således enhetslöst. En skog kan ha ett indexvärde från noll och uppåt.

The public transport network in Täby commune consists currently of two types of bus line of whichboth belong to the category of feeder lines. The first type terminates at Danderyds sjukhus and feedsto the subway whereas the second type terminates at Täby centrum and feeds to Roslagsbanan, asuburban narrow-gauge railway system in northern Stockholm. The trunk bus line that connectsgreater parts of the commune with Danderyd is the ring line 604 and goes both clockwise (604H) andcounterclockwise (604V). The main negative aspect of this structure is the complicity in incorporatingit timetable-wise with other bus lines that share the same route, such as through Enebyberg.The goal of this project is to investigate the possibilities of splitting ring line 604 and connecting theends to two different bus routes that terminate at Täby centrum today. Apart from easing thecoordination with other bus lines through Enebyberg, the extension also creates new directconnections from various areas in Täby to Danderyds sjukhus.

The heating of companies premises is today functional with electrical heating and heating offossil fuel. The energy cost for these kinds of heating in buildings has heavily increased duringthe last years and the influence on the environment has become more visual. This leads to thatenterprises today become more anxious to render energy more effective and find alternativesolutions to their ancient heating systems. This is something that Skandinaviska kraftprodukterAB in Halmstad has become aware of.The purpose with this examination is to find the most cost-efficient and environmental measuresfor the office and workshop premises of SKP AB. Where one of the bigger things is to find agood alternative for their current oil furnace, which was heating the workshop.

A district heating plant has the advantage that it can take advantage of the waste heat from industries and use of cheap fuels to produce heat. But for the long term is competitive requires that energy is also saved in district heating plants. One way to save energy in a district heating system is to increasing cooling to the return temperature. This leads to less power needed to drive the distribution pumps,  and that more energy could be extracted from the same amount of fuel by an improved flue gas condensation.In Karlskoga the return temperature into the district heating plant is high. They would therefore reduce the return temperature in order to extract more energy from the flue gases.

I Sverige pa?gick under 2013 efterbehandlingsa?tga?rder pa? 1789 fo?rorenade omra?den. Det nationella miljo?ma?let ?giftfri miljo?? har av regeringen angetts som det styrande miljo?- ma?let vid efterbehandling. Efterbehandlingen syftar till att minska risken fo?r fo?rore- ningsspridning i mark fra?n avslutade verksamheter som industrier, va?gar med mera.

A recommendation for stand treatment of lodgepole pine (Pinus contorta) is, in a scientific point of view, lacking when it comes to harvesting for biomass energy. Within the next decades it is expected that 280 000 hectares of lodgepole pine will have reached thinning age on the domains of Svenska Cellulosa Aktiebolaget (SCA). Due to this the interest has grown rapidly for studying the possibilities of harvesting biofuel assortments already in the first thinning. In this study the distribution of the biomass within lodgepole pine trees has been studied and taken into account for estimating the proportions of harvested assortments when using different methods of thinning. The methods studied were conventional biofuel-harvesting (with delimbed branches gathered separately from the round wood) and thinning with cutting of round wood and long tops (incl.

This work has been made in cooperation with the municipality of Eslöv and the inventory area is a part of the deepening of the municipality plan of east Eslöv. The aim of the work is to test the principle of balance in the overall planning. Later in the detailed planning process a more detailed calculation is made and a suggestion of suitable measures for compensation is made. Then the method with green area factors can be used. The goal is to balance the negative influence on the environment from the planned impacts to gain a sustainable development of the city. The principle of balance means that the one responsible for the development also has to compensate for the negative impacts on nature and landscape that comes with the development.

In November 2007 the countries around the Baltic Sea signed the Baltic Sea Action Plan (BSAP). The action plan was an initiative from HELCOM due to the environmental status in the Baltic Sea. The action plan implemented a new approach with measures targeting the whole ecosystem. Eutrophication, hazardous substances, biodiversity and maritime activities constituted the main segments. The parties were to establish national implementation plans to fulfil the BSAP goals, which shall lead to good environmental status in the Baltic Sea by 2021.  The aim of this thesis is to investigate the points in common regarding conceptions of eutrophication in the Baltic Sea between the management, the science, the media and the public.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

Fire has historically been of great ecological importance in the boreal forests of Sweden. The forest fire regime has, however, varied between different parts of the country. The objective of this thesis is therefore to investigate the fire history in Fulufjället National Park and, on this basis, give suggestions for future fire management. The reconstruction of fire history was done by cross-dating fire scars in samples taken from living and dead Scots pine (Pinus sylvestris). Local fire chronologies were established at 17 points in the forests in and around Fulufjället National Park by cross-dating fire scars on 54 samples. The oldest year-ring dated from year 968.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.