The reason for performing an Environmental Impact Assessment (EIA) is to incorporate environmental concern in different kinds of plans and projects. The purpose of such an assessment is to identify and describe direct, indirect and cumulative environmental impacts.Geographical Information System (GIS) is a tool that can be used to combine spatial extension of both sensitive areas and different environmental impacts in a quick and easy way. Because of that, descriptions of environmental impacts and motivation of different standpoints on a specific issue can be more correct and easier to make if GIS is used as a tool.Hence, GIS can contribute to improve the quality of Environmental Impact Assessments. If the benefits of using GIS are to out weight the costs, geographical information of satisfactory detail, actuality and accuracy need to be available at reasonable prices.In this paper, case studies are carried out for three different geographical analyses to investigate the use of GIS as a tool in EIA. From these case studies, more general conclusions about the benefits and limitations of using GIS for Environmental Impact Assessments are also drawn.

AbstractBuilding Information Model/Modeling/Management (BIM) is a tool that allows for efficient working methods. BIM saves time and money while providing the potential for visualization. This method of working is based on a 3D-model, and then a fourth and fifth dimension are connected. 5D modeling means that a spreadsheet creates cost estimates based on the 3D model. This provides opportunities to carry out calculations in the early stages of the projects. Calculations are currently performed manually and do not contribute to the development that the construction industry requires.

Internationellt sett är merparten av de dammbrott som ägt rum kopplat till grundläggningen. Det är oftast kopplat till att det finns osäkerhet i de rådande grundförhållandena. Som extra säkerhet, installerades bergförankringar som en åtgärd att behandla osäkerheterna i de rådande grundförhållandena.I Sverige är merparten av kraftverksdammarna uppförda mellan 1940-och1960 talet. Det var inte ovanligt att cementingjutna slakarmerade kamstål sattes under dammarna som en extra säkerhet. När dessa bergbultar installerades var kunskapen om dess verkningssätt begränsat, då teorier om bergbultens verkningssätt började utvecklas under 70- och 80-talet.Vid dimensionering av bergförankring till dammbyggnader i nutid tillämpas RIDAS, Kraftföretagens riktlinjer för dammsäkerhet, som är upprättade av de Svenska dammägarna.

In recent years it has become more and more evident that man has contributed to much of the climate changes that have taken place during the last century. A major challenge today is to reduce emissions and energy usage at the same time as the global population is growing. To contribute to a better environment, Stockholms Stad has set at target of becoming fossil fuel free by the year of 2050. The construction of new districts is done with this goal in mind; energy efficiency and renewable energy sources are examples of methods to achieve this.Solar energy is considered to be a sustainable energy source and the most common techniques to harvest solar energy in Sweden are solar cells and solar collectors which produce electricity and heat respectively. This report aims to investigate whether an investment in any of these systems would prove to be economically beneficial at Kvarnholmen, a district under construction in eastern Nacka, Stockholm.Since the finished blueprints only cover a small portion of Kvarnholmen, the report examines the possibilities for a house where construction has already begun, Nya Kvarnen.

In the middle of Australia there is a city called Alice Springs. The city has one of the highest amounts of daily sunshine hours and sun irradiation in the world. The Australian Government runs a project called Solar Cities, and Alice Springs is one of the participators. The main part of the goal with the Solar Cities project is to increase the amount of electricity generated by solar power and by doing that lower the impact on the environment. This thesis examines the possibilities for construction of a large scale solar power plant in Alice Springs. This is done to determine the potential of creating a more sustainable energy system in the city.

Energy issues are constantly increasing attention in today's society. People's impact on Earth isentered in more contexts. Many discussions are about how the entire social structure needs to bestreamlined in order to achieve sustainability. The residential and service sector accounts for 39 % oftoday's total energy consumption in Sweden and the increasing electricity prices have made buyersmore interested in energy issues.There are many buildings in need of refurbishment today, including all the apartments that werebuilt in the 1970s to reduce the housing shortage at the time. 650 000 apartments of one millionapartments were built during the so-called the one million program and is currently in need ofrefurbishment.

The task of making a correct application for B- activities is the foundry time consuming task. Information and facts concerning your entire business activity shall be attached into a description of environmental consequences, which will be the basis for the decision making whether the activities shall be granted a permission to practise environmentally hazardous actions or not. When the Environmental Act were established 1999, the permission process became more extensor. With this study I want to give an insight about how these applications are made. The methods I have used to collect information are a study literature where the Environmental Act has been the focus, and qualitative interviews with two County Administrative Board. I used the Environmental Act to understand why permission is needed and the interviews to give me insight in how the work is done. My conclusion is that it is very unusual that an application is granted without complements.

AbstractAt Saltvikens copperindustry, which is located in the municipality of Oskarshamn, copper was refined from sulphiteore some hundred years ago. The ore underwent several steps in the process before the final product was received. These steps all had an influence on the environment through discharge of heavy metals. The area where the copper industry was located is today considered to be of specific national interest due to its valuable nature and cultural values, as well as its value for recreational outdoor activities. Therefore, it is important to determine the present level of contamination and if any transport of contaminants have occurred, and to identify the risks that are associated with the site both at present and in a longer time perspective.Thirtynine soil samples and 16 sediment samples have been analyzed.

SummaryThe purpose of this thesis is to examine what effect the IFRS 2 has on earnings, equity, financial strength and return on equity for listed Swedish companies with active stock option plans. The purpose is further to investigate the companies? attitudes towards IFRS 2 and to find out if companies tend to deviate from stock option plans due to the changed accounting rules. We also want to examine the view of IFRS 2 from an auditor?s perspective.We have used a deductive approach and a mix of quantitative and qualitative research methods with a view to get a completely clear picture within the field of study.

SammanfattningSyfte - Syftet med denna studie är att bidra till ökad förståelse för hur lager kan styras när varierad efterfrågan förekommer. För att uppnå syftet är målet med studien att sammanställa processer som underlättar för lagerstyrning vid varierad efterfrågan. Detta möjliggörs genom att besvara följande frågeställningar:1. Vilka metoder för säkerhetslagerberäkning och lagerstyrning är lämpliga när hänsyn bör tas till varierad efterfrågan?2.

In several countries that have been early in the development of wind farms, there is today a second hand market for the used wind turbines. The European Union (EU) has established a waste hierarchy in order to minimize throwaway mentality. The second hand market is a part of this as the steps are to minimize, reuse, recycle, extract energy and landfill.In order to promote the development of renewable energy, there are energy certificates for the producers that provide it, wind power being one type of renewable energy. After 15 years the energy certificates for a specific wind turbine are no longer paid, and after that there are several different scenarios for the wind turbine. The scenarios investigated in this bachelor?s thesis are export of the wind turbine to countries that are not as far along as Sweden in their development towards renewable energy, selling in Sweden to individuals, and recycling of the wind turbine, as it mostly consists of metals and therefore is recyclable.

En samverkanspelare drar nytta av interaktionen mellan det omslutande stålröret och profilens betongkärna för att därav erhålla en ökad lastkapacitet. För att förstå beteendet och effekterna av interaktionen mellan stål och betong är det viktigt att förstå de enskilda materialens beteende. Betongens huvudsakliga uppgift i en samverkanspelare är att ta upp tryckkrafter medan stålets främsta uppgift är att motverka momentpåkänning och uppta dragkrafter. I normal rumstemperatur samverkar stål och betong för att bära den aktuella lasten.Samverkanspelaren har stor potential med avseende på lastkapacitet. Nedan tas några av de förväntade positiva effekterna av interaktionen mellan stål och betong upp:Förekomsten av buckling för stålet försenas samtidigt som den försämrade bärförmågan efter lokal buckling uppstått dämpas, beroende på betongkärnans återhållande effekt.Förhindrar spjälkning och hållfasthetsnedsättningen för betongen blir inte lika drastisk.Ökad tryckhållfasthet och deformations kapacitet, speciellt för grövre tvärsnitt.Vid ett brandscenario utsätts pelaren för en temperaturhöjning.

In today's agriculture efficiency and the capacity of tools and machinery are crucial. In this work we investigate whether it is possible to enhance the capacity of sowing by increasing the work speed of seeders, how seed technology affects seed placement, and if there is any difference between two different brands of seeders and their sow techniques. The seeders we have chosen to compare are Väderstad Rapid drill and Amazon Cirrus drill. The tillage capacity of the seeders and their traction power needs were examined as well.Väderstad Rapid and Amazon Cirrus were tested in a randomized block design with four replicates at three different speeds, 8 km/h, 12 km/h and 15 km/h. The seed placement at the different speeds was examined by dividing the seedbed into four different zones from its surface to its bottom.

In this thesis a method for evaluating investments in small scale hydro power is presented. An analysis of the future position that small scale hydro production will have on the Nordic electricity market is also carried out. This is done by an inventory of technology and economic and environmental aspects. The inventory is also a guide as to how the project should be implemented.Hydrolyzer is the name of the Excel tool developed to evaluate investments. The tool requests input data from the user and then evaluates the investment and generates a sensitivity analysis.

In order to suggest improvements for the logistics of STARKA, we felt that we had to analyze all the activities which were related to STARKA's logistic processes. Our primary analysis consisted of a rough but comprehensive description of different functions in the company, and the relationship between them. This was performed by following a typical order through the company to see which functions were affected by the order.Since we needed a more thorough view of the company, we decided to analyze the different products STARKA currently has on the market, focusing on economic data such as turn-over, profit, profit margin, deficiency cost and cost of warehousing. We also analyzed the company's choice of manufacturing processes, organization, warehousing processes, strengths and weaknesses.These analyses gave us a clear understanding of the company and its processes. STARKA is a small, function oriented company with a wide range of products.