In Stockholm, Johanneshov the Slaughterhouse area (Slakthusområdet) can be found. A number of companies have gathered there providing the Stockholmers with meat products. This area has a great need for cooling to supply large cold storages. To facilitate this, a central cooling system has been built, supplying the area with effective and safe cooling.The aim of this master thesis study is to give hints to energy efficient and reliable changes that can be put in place at a low marginal cost depending on the future activities in the area. The suggested changes will be presented to the company Bravida (managing the system), which also desires a deeper understanding of the energy flows through the central cooling system.Firstly visiting the site with proper guidance, we have then tried to understand the function of the system including which machines and media that are used.

This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

When forces in foundation piles are calculated according to classic theory, thefoundation are assumed to be infinitely rigid which means that the foundation will notbend. High buildings need their whole width to be stable and use the ground floorwall as a foundation. But when, for example windows are needed in the ground floorwall, the stiffness of the foundation decreases which change the forces in the piles. Inthis report the difference of pile forces versus classic theory has been analyzed, and ifpile forces can be calculated as in classic theory. Further on, the effects of the wallmovement were analysed and how the buildings crack safety would be affected by themovement at the ground floor.

The purpose of this thesis was to make an energy survey and quantify energy flows of individual unit operations associated with the biogas production in Uppsala Vatten och Avfall AB:s biogas plant, located at Kungsängens gård. Moreover, large consumers of energy would be identified and analyzed. The objective of this energy survey was to obtain a detailed understanding of the energy use in the biogas production.The energy survey was divided into two parts: electricity and heat. Each part was treated separately and with somewhat different approach. To estimate the electricity usage during the projcet the rated power of each selected unit operation was noted and multplied with thenmeasured time of usage.

The purpose of this thesis was to make an energy survey and quantify energy flows of individual unit operations associated with the biogas production in Uppsala Vatten och Avfall AB:s biogas plant, located at Kungsängens gård. Moreover, large consumers of energy would be identified and analyzed. The objective of this energy survey was to obtain a detailed understanding of the energy use in the biogas production. The energy survey was divided into two parts: electricity and heat. Each part was treated separately and with somewhat different approach. To estimate the electricity usage during the projcet the rated power of each selected unit operation was noted and multplied with the measured time of usage.

Detta examensarbete har genomförts på begäran av byggnadstekniska byrån i Uppsala. Företaget behöver en ny beräkningsmall med vindlastberäkning för väggar och olika taktyper enligt Eurokod.I dagsläget använder företaget en beräkningsmall som är baserad på gamla normer enligt BKR. Dessa normer kan dock inte användas längre enligt nya bestämmelser inom branschen. Enligt de nya bestämmelserna bör dessa vindlastberäkningar genomföras med hänsyn till Eurokod i framtiden.För att kunna beräkna vindlasten enligt Eurokod och effektivisera beräkningsgången har man utvecklat en beräkningsmall baserad på Eurokod. Alla nödvändiga parameterar enligt standarder har använts i beräkningsmallen och användaren tillåts genomföra en snabb och enkel inmatning av projektmått för att på ett automatiserat sätt genomföra belastningsanalysen.

The market risk premium is one of the most important parameters in finance. Its value and the ways to calculate a risk premium for the market is a widely debated subject. This thesis examines numerous ways of calculating a risk premium for the Swedish market with regard to how good an estimation they make of a real risk premium. Estimations based on historical periods ranging from 20 to 85 years is calculated as well as a premium based on forward-looking estimates. The real risk premium is solved out for a selection of companies and an index with the help of CAPM.

The purpose of this thesis is to collect knowledge of techniques and materials for planning roofgardens. Gardens built on top of buildings is not a new phenomenon, already in the beginning of the century architects were experimenting with roofgardens. During the Modern Era roofgardens appeared as a part of the design and worked well together with flat roofs and the ideas of light, air and greenery. Today the most common kind of roofgarden is on a ground-level joist that hides parking or other underground functions. The most important difference between planning a roofgarden and a garden on the ground is the limitation of the load of the roofgarden. Plants, paving-material and equipment must be chosen with this in mind. A light and thin layer of soil demands plants with small needs for water and nutrition.

The aim of this work is to develop new conceptual designs for the fairings that are situated between the fin and the rear fuselage on the new version of the JAS 39 Gripen aircraft, called the Gripen E/F. The designs presented should show a profit in the form of lower weight. To achieve weight loss, the possibilities of using other construction materials other than those which are available at Saab today were studied. Therefore, a material survey was carried out in which the market for modern construction materials was studied to get an idea of today?s level of technology.

Man?s impact on the environment is something that increasingly becomes topical in today?s society. Because of this, several companies have started to take interest in the effects they?re responsible for, not least considering their image. Emissions of carbon dioxide generated from goods traffic are accountable for a large part of the total emissions of greenhouse gases in the world.

Rapporten innehåller inledningsvis en faktadel med allmän information kring temperatursprickor i betong. Här presenteras bl a uppkomsten av fenomenet, vilka typer av sprickor som förekommer och vad ett tvång är. Tanken är att ge läsaren tillräcklig kunskap för att kunna förstå sig på de övriga delarna i rapporten.Resultatet och det huvudsakliga arbetet redovisas i form av tabeller med tillhörande illustrationer där det går att utläsa vilken sprickrisk som förekommer vid flera specifika fall och vilken åtgärd som bör vidtas för att eliminera sprickrisken. Som konstruktör kan du med din egen indata, dvs. dimensioner och temperaturer, följa tabellen och finna resultatet för ditt specifika fall.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

The purpose of this study is to examine the effects of joint venture announcements on stock prices behavior and simultaneously to test the German stock market (Frankfurter Wertpapierbörse) for efficiency. We tried not only to analyze the general impacts of a JV-announcement but also to look for differences in the market response to announcements of different types of joint ventures, namely: domestic, international, horizontal and vertical. Our expectations of efficient market were confirmed during our paper, which employed the technique of the standard event study. The calculation of abnormal returns which are the signals for market efficiency or inefficiency respectively were based on the market model, establishing linear relationship between the return on the market and the return on an individual security. The parameters of the model were obtained through regression analysis..

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..