In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

Den allt hårdare konkurrensen på marknaden gör att det blir alltviktigare för mindre tjänsteföretag att utvärdera sitt val avproduktkalkyl.Syftet med denna uppsats är att undersöka El- Företaget AB:sproduktkalkylering samt ge förslag till eventuella förbättringar genomatt jämföra med befintliga och lämpliga produktkalkyler.Resultatet i denna undersökning visar att påläggskalkylen är den mestlämpade kalkylmetoden för El- Företaget AB. Företaget använder sig avdenna modell idag men i slutsatsen har vi konstaterat att det krävsförbättringar. Dessa förändringar bör genomföras för att företaget iframtiden ska kunna jämföra och kontrollera sina kostnader på ettbättre sätt.Because of the competition on the current service market it is moreimportant to minor service companies to evaluate there choice ofproduct calculation.The purpose is to examine El- Företaget Ab:s product calculation andsuggest possible improvements by comparing with existing andappropriate product calculating- methods.The result in this survey shows that absorption costing method is themost suitable one to use by El- Företaget AB. The company uses thismodel today but through the conclusion we have worked outimprovements. These changes will be made to compare and controltheir cost in a better way in the future..

The purpose of this essay is to describe how Boverkets Byggregler has affected the cost ofnewly built houses from 2003 to 2012, to Boverkets Vision 2025. The purpose is also to findagent-principal relations in the construction sector.When investing in an energy efficient house the operating costs are reduced compared to aconventional house. But due to the lower operating costs, the investment cost rises. In thisstudy, we find out if it is economically viable to invest in an energy efficient house comparedto a conventional house from the customer's perspective.The study's approach has been qualitatively where we in collaboration with Derome Hus hadaccess to three conventional reference houses and a passive house and data that was necessaryto conduct viability assessments on houses. We conducted five interviews with people fromDeromekoncernen and Varbergs kommun.The calculation methods we have used in this study are present value method, annuity methodand a sensitivity analysis.

In this diploma work the approach of determining the required amount of reinforcement in slabs exposed to pure tension is processed, on behalf of Ramböll Uppsala. It is a well-known problem in the industry that there are uncertainties in the determining of the amount of crack reinforcement, especially for structures exposed to pure tension. Cracking caused during the time of dehydration in concrete slabs is the most common defect according to statistics made by CBI[1], which provides numbers as high as 35 % of all the defects caused on slabs are generated by cracks. Comparisons between Sweden's former national standard BBK 04, Building Regulations for concrete structures due to restrained forces of shrinkage, and the current European standard Eurocode 2 are carried out through theoretical studies and concludes with several examples of calculations. Rigorous calculations of both standards, BBK 04 and Eurocode 2 with application of the national annex in Sweden and Denmark are performed.

Today?s system to measure the volume in a tank consists of a vertically placed sensor. When a vehicle is tilted the level of the fluid might change and if the volume is calculated based only on the information from the sensor it could result in a incorrect value.This thesis exams a new method to calculate the volume in tanks by using sensor fusion to crosscheck the i formation from the level sensors when the vehicle is tilted. The information is then used to see if it is possible to identify the grade of tilt by the change of fluid level. If the grade of tilt can be measured then the volume can be calculated in a more accurate way.

This Master thesis is about a postal- and telegraphic building in Eskilstuna, Sweden. The construction methods for the specific building and buildings in general from the same time are described. The purpose of the report is to describe the loads acting on the building and how it has been built and why it has been rebuilt during the years. After this, possibilities of reconstruction and adaptation for today?s demands can be evaluated.

In this diploma work the approach of determining the required amount of reinforcement in slabs exposed to pure tension is processed, on behalf of Ramböll Uppsala. It is a well-known problem in the industry that there are uncertainties in the determining of the amount of crack reinforcement, especially for structures exposed to pure tension. Cracking caused during the time of dehydration in concrete slabs is the most common defect according to statistics made by CBI[1], which provides numbers as high as 35 % of all the defects caused on slabs are generated by cracks. Comparisons between Sweden's former national standard BBK 04, Building Regulations for concrete structures due to restrained forces of shrinkage, and the current European standard Eurocode 2 are carried out through theoretical studies and concludes with several examples of calculations. Rigorous calculations of both standards, BBK 04 and Eurocode 2 with application of the national annex in Sweden and Denmark are performed.

Construction accounts for about 35 percent of the total Swedish energy consumption and most of the energy is used by the large housing stock from the so-called ?Million program?. In the national action plan the government has put forward in energy efficiency. It is mentioned that existing buildings account for more than 90 percent of what is expected to be the housing stock within the coming 50 years. In order to meet environmental objectives its required that the existing stock be reviewed for energy efficiency. The goverment is now initiating a national framework with a budget of SEK 300 million Swedish crowns per year for five years, starting in 2010 to achieve the goal on energy efficient buildings. Energy efficiency of buildings in both new construction and above all within the existing stock are addressed.

With today´s power uprates in BWR reactors the bundle lift force has become aproblem. The lift force is calculated using a best estimate approach and the resultfrom the calculation should pass the existing lift force margin. Lift force margin isdefined so that the lift force may not exceed 80 % of the fuel weight. The margin issupposed to cover all the uncertainties that exist in the lift force calculations.However, no uncertainty analysis has been conducted to quantify the uncertainties.In this report the uncertainties in the lift force model have been quantified. Each inputparameter to the lift force model which has been assumed to have an uncertainty isassigned a probability distribution.

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.

Environmental destruction is a growing problem in our world. Almost every day there are new reports concerning that we have to do something about the greenhouse gasses. Simultaneously is the human constantly more eager to have a life with higher standards and therefore uses more energy. The environment is a question that is highly up-to-date and more people try to find solutions on how to save our planet. One way to decrease the energy demand is to build passive houses, where the houses don?t have any active heating.

The purpose of this essay is to describe how Boverkets Byggregler has affected the cost ofnewly built houses from 2003 to 2012, to Boverkets Vision 2025. The purpose is also to findagent-principal relations in the construction sector.When investing in an energy efficient house the operating costs are reduced compared to aconventional house. But due to the lower operating costs, the investment cost rises. In thisstudy, we find out if it is economically viable to invest in an energy efficient house comparedto a conventional house from the customer's perspective.The study's approach has been qualitatively where we in collaboration with Derome Hus hadaccess to three conventional reference houses and a passive house and data that was necessaryto conduct viability assessments on houses. We conducted five interviews with people fromDeromekoncernen and Varbergs kommun.The calculation methods we have used in this study are present value method, annuity methodand a sensitivity analysis.

The automotive market is currently undergoing a historical change where stricter emission legislations and ever increasing fuel costs have intensified the search for effective alternatives to the conventional internal combustion engine, which has resulted in a substantial trend towards electrification of powertrains. Storage of electrical energy is the fundamental component in this technology where the lithium-ion batteries are currently considered as the most appropriate solution. Lithium-ion batteries, however, as other types of batteries, can only be used efficiently and durably within a specific temperature range.This Master thesis has been carried out in collaboration with Electroengine in Sweden AB, situated in Uppsala, which has an ongoing project regarding development of a modular battery system for electric powertrains. The project is at a stage where an initial prototype has been developed which provides the foundation for this thesis. The study has addressed the battery system performance from a thermal perspective, in order to validate the ability of the system to create a thermally serviceable environment for the lithium-ion battery cells.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.