This thesis concerns how the power quality in the grid is affected by the connection of wind power plants. As things are at present, Fortum Distribution AB has a number of wind turbines and wind parks connected to the own grid. As the pressure on building and connecting additional wind power is increasing, so is also the interest of how the already existing wind power generation affects the power quality in the nearby distribution grids. The study is performed by direction of Fortum Distribution AB and is limited to the 10 kV/40 kV-grid in Bohuslän, Sweden. The methods for calculation of power quality are compared to the results of a number of measurements.

A current conveyor is an active building block that can be used to implement most active and passive components. It differs from the operation amplifier in that it uses current instead of voltage. The current conveyor also has significantly higher voltage gain over a broader frequency range. To simplify the construction of analogue circuits and increase the construction efficiency it is desirable to use a top-down methodology. This means that the whole system is partitioned into a hierarchy of subsystems.

Costs of maintenance on combines are a subject of interest thus it constitute a large investment and cost for the individual farmer. Therefore it is important to have up to date knowledge and the right facts to be able to do reliable calculations on one of the largest investments for a farmer. The aim of this study was to compare costs of maintenance on combine/threshingmachine with the computer program for advising environmental issues in agriculture, STANK. Interviews took place and data were collected by handing out questionnaires to 20 farmers. A similar study conducted by Neuman (2003) investigated costs of maintenance and compared these with STANK. The results of this study have also been compared and examined related to data from SLA - Skogs och Lantarbetsgivarförbundet. The result shows that 18 out of 20 combines were given a higher cost of maintenance when using STANK compared to the numbers in this study.

This thesis raises the problem with acid mine drainage around the closed mine Finngruvan.The purpose of the investigation was to compare metal content in surface water in the areaand its catchments between year 2010 and 2003, also to make calculation of specific runoffand metal load, furthermore determine the recipients in the area. Surface water samplingwhere preformed at the same place as 2003 and also at a few other places of interest. Adigital elevation file were used in GIS to calculate the area of the watersheds in the region,observations in the field where also made. The collected data were used to make comparisons,calculations and conclusions. The result showed that the surface water 2010 had somewhatlower metal concentrations.

This thesis assignment at C-level is focused on calculation models and prediction methodswhish can be used in the stage we call ?prospecting? of possible windmill locations. Thelocation is southeast of Halmstad at the Farm ?Stjernarpsgods?. The rapport has two mainareas directed towards this task.

Population growth leads to an increased need for new buildings, both residential and commercial. The regulations of structural design also changes with time. From a sustainable community perspective it may be profitable if existing buildings, that no longer performs their original function, are reconditioned. Knowledge and understanding of the surroundings of the residence must be available. Regulations regarding accessibility to all has increased.

In this thesis, input data for energy performance calculations on commercialpremises have been studied. In energy performance calculations, where internal heat gain parameters are unknown, template values that, in a reasonable way represent the activity in the room, are necessary. These values can be used as input data for whole-year calculations, or for calculations on shorter periods of time.The purpose of the Sveby project is to create standardized work practice in energy issues for the construction industry. The work in this thesis is conducted to correlate with the purpose of the Sveby project, with aims of contributing with information and guidelines for the continuing work with commercial premises.In this report, suggestions for template values for internal gains parameters, based on research and calculations in the field are presented. Suggestions on how these can be implemented in a user-friendly way for two energy performance calculation software are also given, VIP Energy and IDA ICE.

Air tightness in new buildings has been discussed for several decades. But the knowledge in the subject is low. With tougher requirements from the Swedish government about energy consumption for a new building required competences how these shall be met. It's not only the thick mess of insulation that are important, it's also the air tightness. This report is about air leakage in Swedish houses.

Detta examensarbete har utförts med begäran från Trafikförvaltningen. Arbetets huvudmål är att undersöka om det är möjligt att använda värmestrålning direkt mot ytan av strömskenan för att hindra isbildning på en kortare tid då absorptiviteten är som bäst..

The thesis work has been carried out at Volvo Aero Corporation (VAC) in Trollhättan. VAC has entered a partnership as developing and producing partner with engine manufacturer Pratt & Whitney and is currently at the starting phase of producing the turbine rear frame (TEC) to the engine PW1000.The purpose of this study was to create a report on process level that describes the conditions and the potential with PW1000 TEC to reach the product cost calculation taking into account lead times and describe alternative method solutions.The report describes a comparison between the present flow (2012), a flow based on product cost calculation (2016) and a potential flow (2016). The work has mainly been based on acquiring the knowledge and information available to inspect the present flow; this has been done by workshop observations, meetings and gathering of the information that is available on the work site for the PW1000 TEC.The information obtained has been merged into an Excel document, called Roadmap. It serves as a roadmap with current situation as the start and the potential flow for 2016 as the goal. With the roadmap as a tool, assumptions have been taken considering the flow and how it will change, where processes have been eliminated, reduced or marked as a problem..

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.

Sverige är idag i starkt beroende av importerade oljeprodukter för att driva de dagliga transporter som krävs för att samhället ska fungera. Kraftigt ökade priser på olja, eller en slopad internationell oljehandel skulle få ödesdigra konsekvenser för Sverige. Samtidigt är Jordens klimat i förändring, varmare temperaturer leder till smältande inlandsisar och detta till stor del på grund av världens oljeanvändning. Denna rapport behandlar de ekonomiska aspekterna kring biogastillverkning för ett Väster- och Norrbotten självförsörjande inom drivmedel för vägtransporter. Rapporten utreder huruvida denna självförsörjning skulle vara möjligt med avseende på tillgång utav råvaror för biogasanläggningarna.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.

Throughout this thesis three main factors have been identified that can be out of significance for transfer pricing in multinational companies if the proposal for Home State Taxation is adopted. These factors are rules for calculation of the tax base, rules for dividing costs over periods and the tax rate. The formula for sharing profits will also become a factor that can have an impact on the European companies'incentives for transfer pricing interacting with above-mentioned factors. The effects of transfer pricing aiming at reducing the total amount of the taxation burden for a group of companies will be strongly reduced in the future if the proposal is adopted. Incentives for transfer pricing will loose importance, though not disappear altogether.