This thesis paper discusses the results of a survey which was conducted to investigate the potential usefulness of mobile apps in the maintenance department at Perstorp Specialty Chemicals AB. The paper contains four sections, a theory section, a method section , a section that explains the functionality of the app, and finally a results section where the results and conclusions of the survey are discussed. The theory section explains and discusses relevant terminology used in the computer science field and in the maintenance industry. The theoretical model used in this paper is also discussed. The methods section gives a stepwise description of the project and a description of platform and software used.

Practical and theoretical learning are methods that are used in schools as a way to prepare students for the working life. Within the practical learning knowledge is not only acquired to learn in practice, but the students must also be able to apply their theoretical knowledge to what he/she does. Against this background, the aim of the study was to investigate the importance of practical learning for students in college / university level and how they are experiencing the stress that may arise out of the loss of practical learning during their education, as well as their vision for working life after completing their education. The population of the study consisted of N = 36, which 18 of these had used both practical and theoretical learning and the remainder had only used theoretical learning. The method was a questionnaire survey with a high proportion of fixed alternative answers according to likert scales.

This thesis compares different methods for risk assessment of a creosote contaminated site in Vansbro, Dalarna. In a complementary study the importance of using representative data for calibration and validation of stationary groundwater models is discussed. The time dependency between surface water levels and groundwater levels on the site in Vansbro is evaluated by step response analysis. The results show that the groundwater levels reflect only long-term variation in the surface water levels. Hence the use of such long-term means for calibration and validation of the stationary groundwater models is the only theoretically defendable alternative.As a first step in the comparison of risk assessment methods the degree of contamination is evaluated on the basis of generic guideline values for contaminated soils, developed by the Swedish Environmental Protection Agency.

Aims: Patient associations have been around for some time and research has shown that such associations can influence society, politics and how diagnoses are thought of. This study is a comparative analysis of two patient associations in Sweden. The first association called Attention represents people diagnosed with neuropsychiatric disorders such as ADHD. The other association called RSMH represents people diagnosed with mental illness such as depression. The aim of this study is to explore the social and political agenda of these associations and to explain their relation to biological, psychological and social models of explanation.Method and theory: The method used was a qualitative document analysis using documents produced by the associations themselves as well as documents from media and politics.

This study is about to see whether the two models representing the strategies of lean production is to use and apply in different companies. The models are structured in two different ways in which one of them is checking the softer elements of lean production in the form of leadership and strategies. This model is called Lesat and is based on interviewquestions. The second model, called "learning to see" is about identifying flows. This, together shall then give an idea of how mature companies are when it comes to a whole in the concept of lean production, and susceptibility to use these models to their respective companies. The study is conducted in two companies, SKF couplings systems and AQ parkoprint.

Value-at-Risk (VaR) is among financial institutions a commonly used tool for measuring market risk. Several methods to calculate VaR exists and different implementations often results in different VaR forecasts. An interesting implementation is historical simulation, and the purpose of this thesis is to examine whether historical simulation with dynamic volatility updating is useful as a model to calculate VaR and how this differs in regard to type of asset or instrument. To carry out the investigation six different models are implemented, which then are tested for statistical accuracy through Christoffersens test. We find that incorporation of volatility updating into the historical simulation method in many cases improves the model.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

The potential of information technology as a means to invigorate democratic practise is constantly under discussion. Regardless of the differing opinions as to the most suitable way to utilise IT, there are certain democratic core values that have to be considered. One of these is freedom of information, defined by us as the right of every citizen to seek, obtain and express information. The aim of this study is to explore whether the use of IT as a means to enhance democracy can strengthen the citizens right to freedom of information. As an instrument for analysis we use an article by Jan van Dijk, professor of communication science.

By using steady-state measurements for predicting emissions under a dynamic drive cycle wouldsave a lot of time and money for the exhaust aftertreatment specialists at Volvo cars. The idea forthis thesis has been to investigate if statistical regression models can be used with good accuracy.Questions included are for example if common operating variables such as engine speed, air-fuelratio etc. is sufficient to predict engine-out emissions over the engine operating range with goodaccuracy. Focus was set on the modelling of warm engine, but also the more complex engineheat-up phase was investigated since it is a great contributor to total emissions. While NOxcouldnot be measured because of malfunctioning measurement equipment, only HC, CO andtemperature at inlet of first catalytic converter has been modelled.

AbstractC-level essay in political science, by Frida Orlinder, spring semester 2008Supervisor: Susan Marton?Good contracting? ? A study of contracting in public procurement regarding the transportation of school children?Over the last decades models influenced by the market have been gaining influence in public administration all over the world. New Public Management has been presented as a theoretical ?shopping basket? from which concepts can be applied to the administration of municipal services. The purpose of this essay is to investigate in an explorative way how New Public Management (NPM) views contracting and the role of the internal customer in contracting.

The purpose of this bachelor-thesis is to investigate the possible effects of lease accounting on the estimation of bankruptcy. This is done by estimating the risk via prediction models based on accounting ratios for a sample of 43 listed firms in Sweden. Estimation is conducted twice for each firm, once base on unadjusted data as it is presented in the annual report of 2012, and one with data adjusted for operational leases (that is data is treated as if all leases present were to have been reported as financial leases). In the next step it is tested weather the predictive ability of the models is affected by this adjustment or not. For this purpose translation of bankruptcy risk into synthetic credit ratings via interest coverage ratios is done.

Do ceramics have to be static? This was the question that spurred me into this work, and what kept me working on to achieve the possibility of motion in my ceramic objects. By combining the knowledge gained through my former education as an avionics technician with my interest in the ancient ceramic craft, I strive to create kinetic ceramic handicraft suitable for interaction with an audience.By a series of different phases I slowly go from understanding what kind of motion I want my objects to have, to actually realizing this motion in three-dimensional objects. Through the use of simple models made from corrugated fiberboard followed by more advanced plaster models, combined with different complementary materials such as bicycle inner-tubing and recycled aluminium cans among many others, I, through a vast series of testing, slowly build up a knowledge base later applied to the ceramic objects.The result is for me a success; I have found a way for me to combine ceramics with mechanics. Through this I have created kinetic ceramic handicraft intended for interaction with an audience..

Purpose: The purpose is to research different co-operations between venue owners and WISPs, when WLAN is deployed in a public space. The aim is to establish viable business models for the interaction between the two vital actors in the public WLAN industry. In this work, the advantages and disadvantages of revenue and cost sharing will be defined, along with technical and commercial issues that need to be resolved. Methodology: A number of case studies of the current situation have been conducted in the most attractive venues for WLAN, airports. As the public WLAN market had most widespread adoption and is most mature in the USA, case airports were chosen both there and in Scandinavia.

The purpose of this Bachelor thesis in Economics at Lund University is to try to establish the correlation between the value change of retail real estate buildings in Sweden and macro economic variables. The principal method is the multiple regression model and it is used to estimate the basic model. The basic model is enhanced by estimating some 30 models and the result is two good models. The difference between the basic model and the two better models are small but important. In the lagged basic model, the same variables are used as in the basic model but with different time lags.

There exist several known methods for calculation of radio coverage for ground-based systems. As far as we know there are no equivalent methods for the case of flying platforms when the altitudes and speeds are significantly different to those of ground-based systems. This thesis describes the theoretical concepts behind calculations of radio coverage for flying platforms. An investigation is made to sort out what is important and possible to employ in a model for simulations. A method is described and implemented in a program for evaluation of flying radio systems.