This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The aim of this essay is to analyze the political interests of the United States Government in Turkey, from 1997 to spring 2007, using a qualitative method. I will also analyze any strategic changes during this period, by using theories of realism, particularly Structure Realism and Rational Choice. Using the Rational Actor Model (RAM), I will analyze how nation states such as the United States act in the political arena in Turkey. How can the US Government legitimize the support to Turkey and at the same time criticize there democratic deficit and their view on human rights. Turkey has been an American Military Ally, via NATO since 1952 and its demographic situation has changed since the Cold War.

The aim of this thesis is to contribute to a better understanding of the FRA-law. The focus of the study is to examine how Swedish politicians relate to the new draft of this law on intelligence. Key themes in the study are security, threats, surveillance and privacy. The power relationship between the individual and the state is also examined. Empirical data used in this study consists of a spoken plenary debate in the House which was held in connection with the adoption of the FRA law in June 2008.

Moisture damage in kitchens is an area that many people believe to be irrelevant andnot a subject to concern, however the problems encountered might be larger thananticipated.The purpose of this essay is to get a view of how problematic moisture damagecurrently is as well as what can be done to prevent damage during the constructionand building of new housing.Statistics regarding moisture damage as well as several tools for damage preventionhave been studied and investigated. Industrial regulations have been reviewed tounderstand the requirements construction companies must legally follow during theconstruction and building of new kitchens. Home manufacturers and largerentrepreneurs have been contacted in order to get their point of view regarding theproblems with moisture damages in kitchens.The knowledge of moisture safe constructions is prevalent by home manufacturers,insurance companies and entrepreneurs. Despite this knowledge, the constructioncompanies predominately follow the industries regulations, which normally onlyimplement the minimum requirements.In order to get construction companies to design and build kitchens with increasedmoisture security, stricter industrial regulations might be needed to be implemented.Unlike bathrooms and laundry rooms, kitchens are not defined as a ?wet room? andthe regulations for the construction of kitchens are more lenient.It is difficult to detect water leaks in an early state and the moisture damage is usuallyextensive before it is discovered and repaired if the kitchen lacks moisture securedconstruction and water security.

The project was carried out together with OC Off Course who manufactureand distribute mainly electric bikes.In today?s society, alternative sources of transportation becomes more andmore present and several bicycle sharing programs arises in major citiesacross the world every year.Something that doesn?t exist too much as of yet is bike sharing programsthat uses electric bikes. An electric bike is a convenient way oftransportation as well as a good way of avoiding traffic. With an electricbike you avoid having to sweat when biking over hills or when you need totravel over longer distances.The goal of this project is to develop a bike sharing station according tothe functions need to be met.This thesis Is based on Fredy Olsson´s methods principkonstruktion aswell as a couple of concept generating methods from Kenneth Österlin.From this, a number of sketches were made that later was evaluated inseveral steps in conjunction to a set of specifications. A 3D model of theselected concept was later made in CatiaV5 for a complete product..

The purpose of this study is to investigate whether the new Swedish curriculum, GY11 brought with it changes to how non-religious world-views are presented in five different books in religious education, RE. The method used to analyze the material was a qualitative content analysis as well as counting the pages that dealt with secular world-views. This was later analyzed using philosopher Charles Taylors description and theory on secularization. This was used to identify secular processes as well as to define wether the books definition and description of secular world-views using Taylors concept of ?exclusive humanism?.The research questions are:? What are the authors writing about when describing the secular world- views?? What differences and similarities are there between the different editions prior and after the implementation of the new curriculum, GY11?? Are the secular world-views presented in a way that is compatible with Taylors concept of ?exclusive humanism??The results that are being presented are, first of all that the change between the different editions are not big.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This report shows methods and workflow when exploring the potential to change Outotecs HCD Silver Electrolysis machine to a module type. It?s done as an attempt to lower the workshop and installation costs and to give customer a more accurate prize directly. To do this a concept was produced which was set to a stress test. Additional objectives were to investigate freight and installation procedures, pneumatic connections and to calculate the difference in cost.Once the concept, a reinforced type of the original frame, was chosen stress tests in computer simulations were made and appropriate alterations were made.

A one-cylinder research engine has been used for studies with a Diesel Dual Fuel concept (DDF). DDF is a concept that utilizes a pilot diesel injection to ignite a homogenous natural gas/air mixture. Emissions and engine efficiency have been analyzed in an emission cycle called European Stationary Cycle (ESC) and the knock/pre-ignition problems with this type of engine have been investigated.At low and mid torque levels, an early diesel injection around 60 crank angles degrees (CAD) before top dead center (TDC) was used. At these loads raw NOxemissions was below EURO 6 level (0.2 g/kWh). NOxwas at EURO 5 level over the complete ESC without after treatment and with SCR at high loads it should be possible to reach EURO 6.One issue with DDF is the high HC emission levels.

This thesis revolves around NATO?s role in the Ukraine crisis with the startpoint in 2014. Specifically, through conducting a qualitative content analysis of various NATO related material, a study regarding NATO?s security strategy and defense strategy, and the strategies' implications and roles in the Ukraine crisis, was able to be conducted. The purpose was to obtain an understanding of how NATO?s strategy has been interpreted and implemented in relation to the crisis.

The project team has chosen to carry out the project itself. This is to be able to work more flexibly in the product development process and not be guided by some guidelines.Every day, we read in the media about a new truck burglary. The problem has become so common that we do not even notice it in the media. Each year the theft of 1 billion of Sweden and the entire 82 billion in Europe in 2008. This is an increase of 10 billion by 2007.

Abstract This Concept Analysis according to Walker & Avant (1995) studies the concept of uncertainty in the nursing context. It consists of four parts where uncertainty in general have been encircled in a semantic analysis (part one) and a qualitative content analysis consisting of an questionnaire, distributed to the staff members at one nursing and medicine institution, with an open question about the meaning of uncertainty (part two). The third part is a literature study of the nursing context to find out how uncertainty is described (part three). Part four is the actual concept analysis based on the three first parts. Uncertainty in the nursing context is an individual conscious experience witch is changeable and impressionable. It is chained together with its antecendents and consequences.

This essay describes how theatre can be a tool in social work. The essay evaluates the Swed-ish KRAFT-project, a course for unemployed people with the goal to make them grow as in-dividuals by using drama exercises and performing a theatre play in front of an audience. The essay is a quantitative secondary study of the questionnaire used in the KRAFT-project. Through analysing the questionnaire the participants answered this essay tries to explain the results from a social psychological perspective. The essay also discusses how the participants? self-concept and self-esteem could have been affected by the KRAFT-project.