As the football industry develops into a highly competitive commercialized industry, football clubs must step up and improve their business strategy. This study focuses on the famous Italian club AC Milan, a club with many international titles but with declining revenues. The purpose of this thesis is to study how AC Milan can generate higher revenues by comparing its marketing and business strategy with the most profitable clubs in the world, the benchmarking partners Real Madrid and Manchester United. By using a benchmarking model, following the five steps of this process, conducting observation studies, an interview and examining secondhand information, gaps between the clubs were evaluated and analyzed. These evaluations became together with chosen theoretical references, the basis for the improvement suggestions and conclusions shown by the authors.

The purpose for this study is to look at the Pink Caravans, which is a Swedish travel company that started in the beginning of the seventies. The company today has a unique profile within the travel industry which made us curious about how they have managed to keep their distinctiveness over such a long period of time. We have chosen to focus on how they work with the market in this ever changing world, including aspects regarding for example the customer being more demanding today than before. We have also looked at a potential future for the company considering new trends popping up like the environmental issues. The study is based on a qualitative approach and a case study research regarding the Pink Caravans.

Summary Today energy prices are rising. As a result biomass fuel is getting more and more interesting. Wood chips is very popular, but also straw from grain production is on the table. Lunds Energi AB project a combined power and heating plant in Örtofta out of Lund. Wood chips is meant to be the main energy source, complemented by straw. In this thesis the transportation of straw for fuel is studied.

In this study a case study was conducted at the Transport Agency. The government agency is seeking better alternatives to its current ways of keeping track of important dates stated in legal documents. The agency wants to explore the possibility for an IT-solution for keeping track on those dates. In the case study change analysis was conducted on the vehicle type approval process. Qualitative interviews were conducted with a section manager, vehicle type and component approvers, and with a system administrator and a system manager at the Transport Agency in Borlänge.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

Swedish sawmills of today suffer from unsatisfying economy with high costs and low benefits. The economical result depends on how well the sawmill can use their raw material. Iggesund Timber AB, a sawmill in the Holmen group, produces a large amount is enduse orientated products for the woodworking industry. Therefore the aim of this student thesis was to investigate the possibility of automatic enduse orientated quality grading of Scots Pine (Pinus sylvestris) saw logs by using a gamma-ray log scanner. Iggesund Timber AB has the possibility to grade logs automatically with TINA, a two way gamma-ray log scanner. Grading and classification of Scots Pine logs in Sweden today are mainly manual but can in some rare cases be automatic.

Today there is a widespread opinion that the woodmarket and the forest industry are dominated by a traditional way of thinking and not adapted to the customers of today; a lot of products are produced purely on routine. Also, there is a demand for improving the quality of sawn woodproducts. AB Karl Hedin wants to sort this out by increasingly adapt their products to the demands of the market, i.e. through introducing a short wallstud of standard length, "Hedinregeln". At tirst, the wallstud will be produced in lengths of 2,70 m and of guaranteed quality.

In Örebro, the car traffic share does not tend to decrease. The crowdedness on some of the bus routes is high at times. Investigations show that the residents of Örebro want a city centre whose street environment is more restrictive of car traffic and better for pedestrians, cyclists and public transport. To decrease the car traffic share a rapid, convenient, clear, effective and environmental friendly public transport with high frequency and strong capacity in a short, direct and logical network is needed. A modern tramway fulfils these criteria.At first, this report describes factors that are important to take into consideration when planning a tramway.

Today, maintenance is a big part of the daily life on board ships. It is also one of the bigger expenses a shipping company has and without any loss of quality tries to run as economically advantageous as possible. In the hunt for economical savings the shore-based industry has subsequently applied the use of condition based maintenance, CBM, were a component is maintained according to its actual state. This leads to a reduction of maintenance costs since no parts are unnecessarily replaced. However, within the maritime sector a periodical maintenance is still the most commonly used maintenance system.The purpose of this paper is to chart the factors that are the reason for the low implementation of CBM on board the Swedish merchant fleet's ships.

In the construction industry today there is a significant technological revolution goingon. New methods for automated processes and information management are developedcontinuously. Intense studies are currently taking place to ensure ways and means toembrace the new technology of BIM.At the present, environmental certification systems are considered cumbersome andchallenging. However, the increasing demands of sustainable development in the constructionindustry imply that the environmental certifications will not disappear. ThisMaster Thesis examines the possibilities to apply BIM technology within the field ofenvironmental certifications to streamline the processes.The applications that provide the best opportunities are:- To use BIM to be able to, during the design stage, dynamically evaluate the resultor score a certain building will achieve.- To avoid unnecessary work through collection of data for calculations directlyfrom a BIM-model.- To be able to automate certain time consuming calculations that are currentlyperformed manually.- To automatically examine the completed model to ensure that the demands arefulfilled.The possibilities to use BIM within these areas are however limited by the technologyitself.

Lately, more and more music festivals have emerged in Sweden. People?s desire and need to visit these events only seems to increase. Cultural tourism and music tourism has developed into a significant and important part of the experience industry and it employs more and more people within the tourism industry. The purpose of this paper is to investigate which effects this can have on the local community.

Detta arbete behandlar kalvhälsa och då fokuserat på uppfödning i kalvhyddor, vilka står utomhus. Arbetet innefattar en litteraturstudie samt studiebesök på olika gårdar i Skåne med kalvhyddor som inhysningssystem till sina kalvar. Lantbrukarna intervjuades om vad de tyckte var deras kalvhyddors för- och nackdelar. Även olika fabrikat av kalvhyddor beskrivs..

Benchmarking is an established method of working which is often used in order to develop the quality of the organization. However, almost 70% of the organizations with benchmarking fail due to the lack of planning and structuring of the benchmarking exercise. Maintenance sections in the paper and pulp industry are one of those who have decided to conduct benchmarking. Therefore, the purpose of this study is to gain knowledge of how the maintenance sections in the paper and pulp industry deliberately structure and plan to use benchmarking as a driving force for quality development in the maintenance sections.The study is a hermeneutic case study. Telephone interviews and document analysis have been used as data acquisition methods.The results show that there is a lack of both planning and structuring in the benchmarking process, and lack of management commitment for quality improvements within industrial maintenance.

Background: The global responsibility for multinational companies is a current matter of subject. Now when the world increasingly is getting globalized, economic growth is created, which brings a bigger demand of responsibility on companies. The leading companies from every industry is often becoming the frame for how the production process works and is therefore exposed to outer pressure which, for example, is coming from consumers and the media. Since consumers at present are more aware of what they are buying and where it comes from, it is important that the companies take social responsibility. We have therefore studied three big companies within the clothing industry to see in witch way they are taking their social responsibility.Purpose: Our purpose was to explore how companies within the clothing industry describe their work with Corporate Social Responsibility, code of conducts and where the incentive behind this work is coming from.Method: We have, through a qualitative study, examined how three large companies work with Corporate Social Responsibility.

Tourism is often being viewed as one of the worlds largest sectors and a great contribution to growth and development. There is a large motivation amongst developing countries to promote themselves as a tourist destination, since they expect the tourism to generate economic growth. The government of Thailand has been promoting tourism since 1960, and the number of foreign visitors has increased from 100 000 back then to 13.5 million in 2006. The purpose of this paper was to investigate weather the increasing tourism industry in Thailand has pulled resources away from other sectors of the economy towards the tourism sector, and in that way harming Thailand?s international competitiveness and causing deindustrialization.