The water level of Lake Mälaren has been regulated since the 1940?s. A recentinvestigation suggests that the current regulation needs to be adjusted in order toprevent a decline in water level, salt water from infiltrating from Lake Saltsjön,and risk of floodings. In addition to these preventions, the new regulation couldpotentially effect the natural environment and agriculture practices in the lowlands that surround the lake. The new regulation proposal calls for an increase invariations in Mälaren?s water level during seasons, while the annual mean waterlevel will remain the same.

In today?s society, there are many people who suffer from physical pains due to their work situation. To work sitting down by a desk long hours every day is quite normal but this is a problem. People that sit down and work in the same position all day long the whole week will eventually be affected by long-term work injuries.Large multinational companies around the world offer a customer service where they serve customers who have experienced a problem with that company?s products or services.

Först presenteras metafysisk funktionalism. En Ramseysats för smärta spelar en central roll som en implicit definition av ett mentalt tillstånd över sensorisk input och beteendemässig output. Därefter presenteras reliabilismen som en teori om kunskap. Några allmänna kunskapsteoretiska problem, samt några av reliabilismens problem presenteras. De mest relevanta problem är följande: fallet med en elak demon, klärvoajans samt Mr.

Titel: CRM som källa för idéer till utveckling av nya tjänsterNivå: Kandidatexamen, C-uppsatsFörfattare: Erik Salzmann & Torbjörn KirkevoldHandledare: Sarah Philipson Datum: 1/9-14 Syfte: Syftet men denna studie är att undersöka hur CRM-system används som verktyg för tjänsteutveckling i svenska tjänsteföretag. Från detta formulerades undersökningens forskningsfråga: Hur skapar tjänsteföretag nya innovativa tjänster med hjälp av Costumer Relationship Management? Metod: Undersökningen är gjord med hjälp kvalitativ metod. Telefonintervjuer har legat som grund för datainsamling genom tio respondenter som är aktiva CRM-användare. Respondenterna är valda via ett bekvämlighetsurval.

Högbytorp is Ragn-Sells? largest waste facility and it is located north of Stockholm. There is an old landfill still in use, but at the end of this year it will be closed. The waste deposited on the landfill can, through decomposition, give rise to a large amount of methane gas, which is an energy rich gas that can be used for heat and electricity production. To receive a relatively large amount of gas, the decomposition requires a high moisture content in the waste.

This thesis was performed at Scania?s purchasing department of non-automotive products inSödertälje, Sweden during spring 2007. The management of the purchasing department ofnon-automotive products believe that their internal customers might not have fullunderstanding of what the purchasing department does. This is a problem because the internalcustomers might not use the contracts negotiated by the purchasing department or they mightnot involve the purchasing department when making purchases.The purpose of this thesis is to examine if and how the internal customers? perception deviatesfrom the purchasing department?s perception regarding the task of the purchasing department.And also to create a communication package with the purpose of increasing the internalcustomers understanding of what the purchasing department does.

Rapid Granulator is one of the world's largest producers of granulators, which is a kind of grinderwho grinds discarded plastics to granules which later can be reused when pressure molding plastics.The company wanted help in developing a new, or alternatively extending their previous,measurement equipment. The old equipment was hard to use, required changes in the code fordifferent measurement scenarios and had a limited array of measuring quantities. Rapid had an ideaof a similar concept only with a greater number of input ports, better range of applicable sensors andan advanced yet easy to use interface. The system is supposed to be placed at Rapid's test departmentwhere it will be used as a tool for finding faults and provide data which can be used for furtherdevelopment of the granulators.The project's members accepted the task and immediately began searching for suitable componentsfor the system. After the search was completed a list of costs, limitations, sensors, I/O's anddevelopment environment was presented to Rapid's staff.

AbstractManagement is a field that started getting attention in the beginning of the 20th century by Frederick Taylor. His publication is called the Principles of Scientific Management and is based on the principles of using scientific methods to find the best way of conducting each operation within a production facility. Many of Taylor?s principles may appear obsolete today but the matter of an effective material flow is still highly current. Efficiency is the relationship between the input into an operation and its result.

Rising complexity in the development of real-time systems has made it crucial to have reusable components and a more flexible way of configuring these components into a coherent system. Aspect-oriented system development (AOSD) is a technique that allows one to put a system?s crosscutting concerns into"modules"that are called aspects. Applying AOSD in real-time and embedded system development one can expect reductions in the complexity of the system design and development. A problem with AOSD in its current form is that it does not support predictability in the time domain.

AbstractThis report describes our ten week long thesis work which is the last task in our education in mechanical engineering at Linköpings University. The project has been performed at Siemens Industrial Turbomachinery AB?s service department. The company which is located in Finspång produces, sells and provides service for steam and gas turbines around the world.The purpose of this project is to help Siemens develop their maintenance programs for two of the auxiliary systems which are a part of the complete steam turbine system. These are lube and control oil systems.The project is restricted to two of Siemens maintenance products, No Stop Check (NSC) and the annual Safety Inspection (SI).

?Service Design? har på senare tid fått innebörden att utveckla tjänster med hjälp av designmetodik. Syftet med denna uppsats har varit att kartlägga nuvarande synsätt inom området för att få inblick i hur ?Service Design? kan användas i innovations- och utvecklingsprocesser hos svenska tjänsteföretag. En övergripande genomgång av litteraturen kring området ?Service Design? har gjorts.

The southern part of Sweden, Skåne, is frequently exposed to storms causing great damage to Norway spruce (Picea abies L. Karst.) stands. A storm during the winter 1999/2000 raised the attention of the problem. A lot of forest owners got large areas of spruce stands wind thrown during this storm. Can naturally regenerated birch (Betula sp.) be an alternative on these wind-exposed sites? This was the main question I was facing when discussilig the problems with Esben Möller Madsen, Söderåsens forest district. The aim of this master thesis was to present an economic analysis of Norway spruce versus birch.

Background: Since the start of the twenty-first century it has become very important for companies to act in a responsible manner, in guides of CSR. The idea is that companies have more responsibilities than to achieve a higher profit for their shareholders. They should also care about the society and act in a responsible way.Problem discussion: Problems concerning CSR are that the internal part of the sustainability work has not encountered the same level as the external part of the sustainability work. Companies are today struggling with implementing CSR into their business strategies.Research questions:1. What does a company has to consider when working with CSR? 2. How can management control systems help the implementation of CSR into the organisation?Purpose: The purpose of this thesis is to examine what a company has to consider when working with CSR and how management control systems can help the implementation of CSR into the organisation.

Flooding events are no longer rare, floods occur all over the world. Accordingly, it is vital for the society and different authorities to work with flood mapping. To meet the goal of Uppsala kommun to map the risks of floods in Uppsala län, a map of the different areas around Funboån which are inside the area of risk for flooding have been developed.In the work, cross sections and the water flow have been measured. Moreover, an echo-sounding have been carried out in Funboån to map the bottom topography. From the bottom map and laser scanned data covering the study area, a terrain model was created.

This study focus on how physical and virtual meeting places may promote collaboration between firms and academia for the development of innovations. A case study was conducted on a meeting place that aims to support collaboration for the development of innovations in eHealth between different actors in the Linnaeus region. Data was collected through 6 interviews, whereas 3 with scientists and 3 with entrepreneurs. The data was analyzed based on a theoretical framework based on different perspectives on collaboration and networks, meetings and interaction and, physical and virtual meeting places.The results show that the purpose for collaboration is to be included in a network with other actors in the same area, gain increased knowledge of the subject area and to acquire new external contacts. Furthermore, in order to support collaboration, physical meeting places have to organize effective and interesting meetings.