If Swedish companies are to compete with companies in low-cost countries they have to achieve a more efficient production. The purpose of Total Productivity Maintenance (TPM) is to increase the company's profitability by increasing the productivity. TPM is a method that involves all employees and aims to prevent failures in order to increase the availability of existing equipment.The aim of this paper is to evaluate the implementation process of TPM and give recommendations for the further implementation process. The conclusion and the analysis are based on a case study done at a production department at ABB Cewe-Controls facilities in Nyköping. The case study consists mainly of qualitative data from participation observations, surveys and interviews.Commitment of the management is a key factor in the implementation process of TPM.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

Preporsition for bachelor thesis project, working from the inside and out. Emphasising spatial quality and experience, More or less ignoring form and program. I?ve had issues with these aspects in earlier project, the form or the program takes alot of place in the project. I haven?t tried this approach before, it?s an attractive thought to allow the project take a form of it?s own, enclosing those spaces i create.The initial concept was to place the pools on the ground (not digging them into the ground) making them volumes that divide and define spaces.

The thesis has investigated how Sandvik Coromant could implement the SMED principle on one of their grinders groups and what improvements it would lead to. The aim of the thesis is to identify the current situation and investigate how their setup times would be affected by SMED. The work initiated with a literature analysis about the SMED principles and then proceeded with an analysis of the current situation where the activity was time mapped. The analysis consisted of time trials of the process that the thesis would include. The time studies revealed opportunities for structural improvements to create environment for a more structured process.

This report is the result of a thesis performed at Westermo Industrial Ltd with its headquarters in Stora Sundby and it sums up the author's studies for University Engineering in Innovation, Production and Logistics at Mälardalen University.The main goal of the thesis was to identify problems and suggest actions that lead to the reduction of the repair time from 3 weeks to 2 weeks. The key questions that were answered in order to achieve the thesis objectives are: What are the biggest challenges that make the repair process time last for 3 weeks? What are the necessary means and measures in order to reduce the repair length to 2 weeks? The author adjusted the work to the Swedish repairs, repair issues that arise from sell unit Westermo Data Communications AB with its office in Västerås and performed the status report by mapping the repair process, through using observations, interviews and bibliography research studies. A flow map of four sub-processes (Inbound Delivery, BackOffice, Repair Department, and Logistics) was made and each section was observed, where also the employees were interviewed. Data that has been collected was analysed by the author and the decision to execute a workshop that affects Repair Department and Logistics was made.

The aim of this thesis is to explore possible differences between public and private companies? way to manage projects. In order to analyze the managerial aspects, we have studied the project of a new payment system implemented at the public-transport organization Upplands Lokaltrafik (UL). The project enables mobile payment by text message (SMS). Most theory concerning the management of projects is developed for private companies.

The purpose of the study was to investigate how inventories of suspected polluted areas as a part of the planned control of existing companies cab be designed in order to achieve as great effect as possible. The study was conducted in cooperation with Piteå municipality. An analysis of regional inventory projects, local municipal strategies and a pilot study in Piteå was conducted. The experience from both the regional projects and the pilot study was that in order to achieve an effective control a number of factors were inportant: an efficient selection of companies, a good dialogue between the controlling agency and the companies, sufficient resources, education of municipal inspectors and guidance for decisionmaking. Another inportant result was that the municipal planning can prevent an efficient inventory if the control of city development projects is allowed to take time from the planned control.

Working life changes, just like the rest of today?s society, at an accelerated pace. It is through changes and challenges that human beings develop, personally and professionally. Changes are often met by resistance. The purpose of this study is to see how different factors influence individuals? experiences of change.

The purpose with the essay was to study the school and the social welfare personnel respectively along with their perspectives and views on their collaboration in the work with socially exposed children and how the collaboration was formed.To get answers to my questions, I interviewed three teachers and three social welfare secretaries. The questions and the analysis were divided into themes: the collaboration between school and social services now and in the future, development of collaboration, and facilitation and difficulties.When analysing the interviews I found a consensus in some questions. All interviewed agreed on the importance of collaboration for the welfare of the child through continuous meetings. The relationship and dialogue between school and social services was vital. Both teachers and social welfare secretaries found it essential not to be seen as a hidden authority.

This study aims to examine Business Intelligence research conduct within Swedish government agencies and workplaces in order to understand the recent debate regarding Business Intelligence research ethics and thus answer the following question: Does Business Intelligence praxis in Sweden meet ethical guidelines recommended by international field experts? A theoretical analysis of relevant and also recent publications, including a Business Intelligence method review, was conducted using qualitative content analysis. In order to validate the results from my theoretical analysis I conducted a series of interviews with a number of professionals who useBusiness Intelligence research in their work and decisionmaking process..

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

The pace of product development is increasing. It is important to keep high quality in theproducts even though the time for product development decreases. Those companies whichcan utilize previous experiences are positioned with a significant competitive advantage. ToABB Robotics it has become evident that the knowledge transfer process within the productdevelopment department is inadequate. This study was a result and an attempt to address thisunsatisfactory insight.

During the last decades the local business as well as the multinational organization hasexperienced prominent changes in the technical field. The requirements for reaching newmarkets and achieving higher efficiency in daily work have risen to a whole new level. Totake advantage of the possibilities of IT the user has to be aware of the company?s businessactivities, what shortcomings and chances of development exist today. This is what makes itinteresting to depict the current situation of the company?s business.

Reinforcement is of great importance to fulfill the dimensioned strength of a concrete construction. This requires that the work needs to be carried out with adequate results that neither endangers the workers or the safety of the construction. Progressive development of the planning phase, construction documents, and construction methods is in constant need since the technology constantly evolves.In order for contractors to be able to get acceptances from their quotations requires that they have to increase their working pace in order to be able to leave a quotation with a lower price than the competition.Due to the increasing pace the different parts involved in the construction process is subjected to time pressure. The design stage, construction documents, work preparation and the execution are all affected when everything has to be finished quickly. To avoid problems, it is required that all parts are able to deliver good quality solutions and results under the influences of time pressure, which is not always easy.

The purpose of this study is to increase the understanding of how venture capitalists can use their network in order to reduce information asymmetries between themselves and the venture management team. A qualitative approach with semi-structured interviews, consisting of open questions, have been used to receive gradate information in order to reach our explorative purpose. Our theoretical framework consists of relevant studies made on the dynamics of networks and the problems that can arise in the complex relationship between a principal and an agent. We have been interviewing two venture capital firms and therepresentatives from two business angel networks. We also made an additional interview with an influential financial actor in order to try to verify our conclusions Our conclusions are that an extensive network can be used by venture capitalists in order to; verify ventures? technologies, complement the competences in the venture management team, and arrange co-investments, resulting in reduced information asymmetries between themselves and the venture management team.