Purpose of this study is to investigate whether BBIC had an effect on the interaction between social services and schools. To find this out, a comparative study carried out between two municipalities in southern Sweden who has worked with the BBIC system different lengths of time. The empirical data is based on six qualitative interviews with heads of unit in social services, principals in secondary schools, and social workers who work with children- and youth investigations. The theoretical framework consists of Bronfenbrenners Ecology model, systems theory as organizational theory and the theory of autopoiesis, and Danermark model of collaboration. The results of the survey show that respondents do not find that their inter-organizational collaboration has been significantly affected by the implementation of BBIC, but that BBIC provides a good basis for collaboration due to the logic and structure of the system..

Swedish Trotting association was formed in 1925. They are the ones who design the regulations concerning what is permissible and not permissible for the horse, driver and trainer, when they have a license at a Swedish racing track. The Veterinary department of Swedish Trotting association decides in consultation with representatives from veterinaries around the country what is allowed and not allowed, based proven experience, combined with the availability of scientific data and Veterinary Department's own assessment. After stricter regulations for good animal welfare from the Swedish government, Swedish Trotting association is going to work out a workable model for how new equipment can be tested in the future to see how the equipment affects the horse. In the future, all equipment will be objectively tested before approved. The purpose of this work was to develop a well-functioning model for this. The research-question for this work is: Is this study design a well-functioning model of how the equipment should be tested in the future? The equipment used for designing this model was bitless bridle with a bit.

 Abstract  Interest in Lean grows and spreads to the public from industrial and service sectors. Lean is currently used in administrative processes and it is called Administration but can administration be Lean? The aim of our study is to develop a useful model for a successful implementation of Lean Administration by using various scientific articles, books and information from the case study.The part of the purpose is to: ? Identify critical success factors that arise? Identify the challenges arising from the implementation of Lean Administration.We have studied a Division within Distribution at GE Healthcare in Uppsala. The model that we have developed provides challenges and success factors for a successful implementation.In order to succeed in implementation, a culture that promotes continuous improvement must exist in the organization. A key success factor is to understand Lean Administrations structure and principles.

The purpose of this study was to find out who young people of today talk to about contraceptive. The main questions that we wanted to answer was from who young people wish to get information about contraceptive and whose advice they listen to and trust the most. Our purpose was also to illustrate the questions from a gender-perspective.We chose two equivalent rural districts, when it comes to the number of inhabitants. The young people who took part are students in ninth grade. We wanted to get a great sample so that the study would be representative of the population.

The purpose of this master thesis is to investigate if the mobile library has a similar role as the public library. To study this further we intend to examine the value and function of the mobile library. Answers are sought to the following questions: Can the mobile library be seen as a public library in a smaller scale? How do the users experience the value and function of the mobile library? What does the library staff think of the value and function of the mobile library for the users? What would the consequences be if the service of the mobile libraries would not exist? The method used was qualitative interviews. The groups of respondents are mobile library users and library staff.

At the Skoghall pappermill, sulphatepaper pulp is produced in a continuous digester originally from 1969. To be able to maintain a high level of production there is a need for a process with few disturbances. Variations in how well the wooden chips are packed in the digester is one form of disturbance. Today there are no available measurements on how well the chips are packed. Instead this is regarded as being constant.

The purpose of the study is to explore how social media can be used as a forum to discuss politics and also how young people use critical reflection to evaluate the information available on social media. To achieve the purpose, a qualitative research is used. The empirical data is collected through semi-structured interviews with six high school students who voted in the Swedish parliamentary elections in/of 2014. The empirical data were then analyzed based on previous research on social media, and the school's mission to foster individuals who think critically. The analysis is also based on the theory of deliberative democracy model.

Background and problem: Financial reports are created for the users as decision support. Stakeholders are often subjects to information asymmetry. Banks represent one of the primary stakeholders and financiers of a company, and place great emphasis on financial reports in their credit assessment process. The question is, however, how useful the financial information actually is. According to previous research, banks consider accounting information as troublesome in some respects, mostly due to accounting choices and judgments.

A cars powertrain consists of everything that is needed for its propulsion. The components in the driveline that transfer the power from the engine to the driven wheels are not absolutely stiff, hence they will wind up due to the torque and act as torsion springs. If you suddenly demand a bigger torque by stepping on the accelerator pedal, a so called tip in manoeuvre, and that torque is acquired from the engine as quickly as possible, the driveline will not be able to transfer that fast torque change due to its weakness and as a result it will start to oscillate. These oscillations will be transferred to the driven wheels and make the car to accelerate jerkily which will be experienced as uncomfortable by the passengers. Furthermore, there is a backlash in the driveline that will make the weakness in the driveline even more excited than it should have been if the backlash did not existed.To avoid too big problems with these oscillations there is a control system that controls the demanded torque.

Many research reports mention the fact that a huge number of all system development projects never reach a successful ending; with other words never fulfil formulated goals. By identifying and forming success factors (and in some aspect risk factors) that the project manager in practice can use, this study may be seen as a step in the direction towards minimising the high number of failed system development projects. The purpose of this research report is to investigate how a system development project, where the development process is based on a specific development or process model (in this case the Waterfall model), can and should be driven. I aim to clarify what is demanded of a project leader for the specific development process and give an account for which eventual leadership qualities that can be well suited for given situation in relation to the need for technical competence. Among other things the project manager should inspire confidence, drive, be a decision maker, engage and own some form of basic knowledge in the field of system development.

The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.

A prefabricated timber frame house previously built by Villafabriken AB has been modeled in Autodesk Revit Architectural, a 3D-program based on BIM-technology. This has been done tosee if it?s possible to produce the publications that Villafabriken demands from the designengineer?s work, and examine which possible extra values that may arise compared to traditional 2D-CAD drawing.BIM is short for Building Information Modeling. Everything is stored in a single database and a change in the project file is automatically updated across the project. BIM provides more than just drawings since information from the model can be retrieved in various ways such as lists and quantity schedules.It was possible to produce the publications that Villafabriken demanded using Revit, but BIM doesn?t only mean a new way of drawing, it also require a change in the company?s process were the information from the model is being used..

Ericsson?s factory in Kumla, Modules Kumla, became a hub for radio modules and micro base stations, which enables mobile communication through radio base stations, in 2004. Because of this the factory focuses more on the logistics operations. This has led to a need to be able to plan the capacity for the materials handling system. This master thesis has therefore been performed at Modules Kumla to develop a capacity calculation model for the material handling flow during the autumn of 2005.The work has contained a mapping of the material handling flow regarding to which activities was performed and how much time they consumed.

The purpose of the essay is to analyze the welfare state from a gender perspective. Further, the paper analyzes and critically examines three different normative solutions provided by Irish Marion Young, Nancy Fraser and Jürgen Habermas for the realization of a welfare state that includes women.Habermas argues that the welfare state has created a situation of dependency and state paternalism which reduces both individual and collective self-determination. Young follows Habermas? argument. She argues for a political climate where justice is reduced to the distribution of material goods rather than the elimination of underlying relations of domination and gender specific patterns.

The great economic impact of startups on society has made these types of companies an increasingly popular subject for research. Though no single definition of the word startup currently exists, one could define it as a temporary organization in search of a scalable, repeatable, and profitable business model. Seen from a historic perspective, tech-startups in particular should be considered a new phenomenon and the topic is still relatively unexplored. This study investigates the structure in tech-startups during their first months of existence and compares it to the structure that prevails when the companies have recruited at least five additional employees. In addition, the study explains why these changes occur.