One of ABB Power Systems´s business areas is HVDC (High Voltage Direct Current) technology. HVDC is used for transmissions for both short and long distances. One of Power Systems?s products is called HVDC Light. HVDC Light is a relatively new technology for power transmission, but have before only been used for motor drives applications.

This report is an outcome of a master degree project at Linköpings University in co-operation with Micronic Laser Systems AB. The purpose with this master degree project was to investigate how to implement a receiver in a data transfer system. The system consists of several data channels, where every channel consists of three parts: driver, transmission lines and receiver. The driver send low amplitude differential signals via the transmission lines to the receiver that amplifies and converts it to a single-ended signal. The receiver has to be fast and be able to feed an output signal with high voltage swing.

AbstractThe Energy Declaration is a law that will come into effect October 1: Th 2006. This report has Värnamo municipality as principal and shall clarify what the estate owner in general and Värnamo municipality in particular need to know about this law. Another part that is going to be dealt with is how large the future need for energy experts in this field will be, and which competence that will be demanded for them.The work will in general deal with simplified energy declarations for apartment houses and public buildings, since these buildings are the first to be involved with energy declarations.The energy declaration will consist of a number of important components.? Energy power i.e. how much energy the building consume? If the ventilation control is done? If the radon measurement is carried out? Recommendations of measures to improve the energy power? Reference value to compare the buildings energy power againstAccording to the law the declaration shall been made by an independent expert, which will need certain information for this.

Developed model for easier animal welfare assessment- with examples from dairy cows in loose housingAnimals in captivity are completely dependent on human care. If captive animals are prevented from exhibiting their natural behavior, they may suffer. Animal welfare inspectors, who insure that the animal welfare legislation is followed, use a checklist to assess the situation in the husbandry. This checklist contains only two levels of assessment, which may result in a lack of detail in the assessment of the husbandry. The objective of this report was to develop a more detailed model that provides an overview of the situation in husbandry.

Communication during the process of Environmental Impact Assessment: Interviews concerning three infrastructure projects Environmental Impact Assessment (EIA) is a method to describe the possible impact of a planned project. The aim of such an assessment is to aid a sustainable development, by supplying a comprehensive basis for decision-making. Today there are many people working with EIA in different forms, representing both different interests within the community, as well as having different individual points of view. The proponent is responsible for the EIA, but it is of interest to study the relationship between the different participants who are involved in this process. The aim of this report is to study how the different disciplines involved have communicated with each other and amongst themselves, what characterises good communication, and if anything should be improved.

In this report an MCNP (Monte Carlo N-Particle) model is described for the reactor vessel at Ringhals 2. The model is validated against the specific activity in neutron dosimeters, extracted in 1977, 1984 and 1994. The validation showed that the calculations of the model are within the requirements of a maximum of 20 percent uncertainty for every neutron dosimeter except one, extracted after the first cycle. The uncertainty of this cycle was mostly due to the operation data rather than to the MCNP model.The model has been used to investigate various questions concerning radiation damage. The reliability of the traditional measure of radiation damage, fast neutron flux (En > 1MeV) has been evaluated.  This has been done by taking the ratio for this and another measure of radiation damage, DPA (Displacement Per Atom), for various positions and layers.

This report of 10 credits is a C ? level essay in informatics.The report presents the result of our investigation. The purpose is to answer our problem statements:?How does computer-based graphical pedagogical tools work compared to traditional teaching aids? What is the users view upon the content? Is the information too hard or too easy? Does the structure work better than the traditional website design??Infact is a system that has as its primary goal to present information in a pedagogical way to let users of all ages and sexes learn from the contents. The information shown on the web page www.forskning.se is about Swedish and international research and the sites primary target users are high school students.In our investigation we asked a total of sixteen students divided into three groups a number of questions where after we started a discussion that we hoped would yield some answers about Infact and the homepage in general.Our main conclusion is that Infact is a good tool to use side by side with the textbooks and the traditional teaching aids.

During the later part of the 20th century the amount of children and adolescents in Sweden who reported psychosomatic illness have greatly increased. The main reason is estimated to relate to weak resources in school and school healthcare. Increased resources do not always have to encompass investments for school and school healthcare. Other resources play an important part as well. A child?s domestic situation serves as one of those resources where fundamental knowledge and values are set.

This report treats detection in IR-pictures taken from airplanes over the ground. The detection is divided in two parts. First there is a detection with filterkernels with the task to point on targets and objects that look like targets. The second part is a discriminator that demands more calculations and has the task to sort out the false alarms from the discriminator. Both the detector and the discriminator contain thresholds thats been trained from trainingsets of data.

The Common Agricultural Policy (CAP) in the European Union (EU) is one of the oldest fields of cooperation within the European Union. During the past decades the different Commissioners have made several proposals about changes in the CAP and many of them have not been passed but renegotiated. The present Commission has however published a report in 2011, which emphasizes that the CAP has three alternative ways to go in the future. This study aims to predict which one of these three alternative ways it is most likely that the CAP will take according to the historical institutionalist theory. When to be able to predict this text analysis is used.

This report deals with handling and interim storage of soils which are planned tobe reused in construction works. The types of soils that are dealt with are gravel, topsoil and sand. The thesis work has been carried out in collaboration with Skanska Sverige Väg och Anläggning Sydost. The main goal is to find an area for using to store soil in between projects.Studies of laws and regulations regarding exploitation and storage of soil has led to a theoretical background upon which the report is based. Background informationhas also been gathered in meetings with the employees at Tekniska Kontoret and Länsstyrelsen in Jönköping.On the basis of literature studies results, a general template has been developed for which desirable properties a possible location should meet.The model was applied to find a number of possible options in the vicinity of Jönköping.

This report is the result of a questionnaire survey done in cooperation with the company Sydved and their contractors. The investigation concerned all their ordinary contractors. The main goal with the study was to find out the contractors opinion about the current cooperation conditions with Sydved, their opinion about the future and how to improve the cooperation. All contractors got a questionnaire to fill in and return within a given date. The percentage of answers was 48 % at the first stage and further 11 % answered after reminder. The result of the investigation indicated that the contractors in general have a positive attitude to Sydved and the way that the company acts.

The main purpose of the project was to identify potential environmentally harmful substances which can be leached from rubber asphalt. A method for analysing asphalt was developed and three rubber asphalt materials were analysed after being cryogrinded. One of the materials was also tested in a road machine made for testing of asphalt paving. The particles created in the machine were analysed in the same manner as the cryogrinded asphalt materials.The asphalt materials were leached by water during 24 hours. The leachates were extracted with dichloromethane, dried with sodium sulphate and concentrated to a small volume.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.