Sökresultat:
618 Uppsatser om The Savings Taxation Directive - Sida 37 av 42
Ny tillsynsmodell med tillhörande marknadsorienterade styrmedel : En granskning av föreslagen tillsynsmodell med Danmarks arbetsmiljömodell som förebild
The corporate world has become increasingly unpredictable and complex. Several companies are dependent on a rapidly developing market. The development has created a positive impact on production but on working conditions it has resulted in increased work pace and load. Psychosocial and stress-related problems has increased. The development has also meant a greater awareness of work environment issues relevant to competition for customers and employees.
Planering av vägupprustning med hjälp av GIS och optimering : en fallstudie på Holmen Skog
The objective of this thesis was to develop a method for the planning of road upgrading at Holmen Skog, a Swedish forest company. A critical issue for creating such plans is to identify roads that are suitable to upgrade to a standard that can handle heavy traffic during spring thaw, since spring thaw is a bottle neck for transporting timber. The method was tested in a case study at a district.
The work consisted of two parts. The first was to retrieve and prepare geographical data for the roads.
Simulation driven design : An iterative approach for mechanical engineerswith focus on mesh, quality and convergence
This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.
Stafettläkare - Räddaren i Nöden?
During a long period of time, rental doctors have created a vast debate in Sweden. Currently, there is a shortage of doctors working in Sweden and to guarantee the lawful right to healthcare of high quality the counties must hire doctors through employment agencies. There are different opinions about rental doctors, some thinks the temporary employment results in a negative work environment and furthermore puts the patients at risk. Other people consider the Swedish healthcare to not function without rental doctors. The purpose of this essay is to investigate rental doctors through a legal perspective and how temporary employment actually affects the patients? security and the work environment in Sweden?s healthcare.
EC Legal Regulation of the Insurance Market; Challenges of Integration
Over the last decade, the private insurance market has undergone a stable growth in turnover and growing demand for insurance products in all Member States of the European Union. Therefore, the creation of a single market in insurance will enable consumers to have access to wider choice of insurance products, and insurance companies to gain access to markets in various Member States and compete effectively. The EU legal framework for the insurance industry embraces the Treaty freedoms of services, establishment and capital, the EC Directives and the ECJ case-law. The present thesis identifies numerous factors that hinder the Community insurance market integration and offers possible remedies. The summary of the market obstacles is all-inclusive and reflects the responses to the questionnaires and the Commission surveys.
Kan implementering av Lean leda till effektiviseringar i skandinavisk sjukvård?
AbstractOur purpose for making this study is to study the implementation, the use of and the effects of Lean within our case objects. We chose to make this thesis by case studies. The three themes mentioned above is also the main research questions that we aim to find an answer to by this study. We have chosen to do a cross section analysis where we conducted structured interviews to find answers to these questions. The theoretical reference frame consists partly of traditional theoreticians within Lean but also more recent research within the subject as well as theory specifically for Lean within the Health Care sector.The result of this study shows in all our case studies that the Management has been supporting the implementation, but that the implementation process proceeds faster if also the professionals are involved in the process. To succeed with the implementation there is a great need for good reasons and strives that can benefit the professionals. By the use of Lean our case studies have evaluated its processes, with the main intentions being to reduce waste activities and to create flows with ?pull systems?.
Aktivitetsbaserat kontor eller öppet kontorslandskap? ? En multivariat studie av attityder till kontorstyperna
This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.
Rättvisande bilden med humankapital : En fallstudie av fotbollsklubbar och tjänsteföretag
AbstractOur purpose for making this study is to study the implementation, the use of and the effects of Lean within our case objects. We chose to make this thesis by case studies. The three themes mentioned above is also the main research questions that we aim to find an answer to by this study. We have chosen to do a cross section analysis where we conducted structured interviews to find answers to these questions. The theoretical reference frame consists partly of traditional theoreticians within Lean but also more recent research within the subject as well as theory specifically for Lean within the Health Care sector.The result of this study shows in all our case studies that the Management has been supporting the implementation, but that the implementation process proceeds faster if also the professionals are involved in the process. To succeed with the implementation there is a great need for good reasons and strives that can benefit the professionals. By the use of Lean our case studies have evaluated its processes, with the main intentions being to reduce waste activities and to create flows with ?pull systems?.
Verifiering av beräknad energiprestanda för flerbostadshus byggda år 2007-2009
The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.
Utvärdering av Vissberga lakvattenbehandling
In connection with the admittance of the EC-directive (99/31/EC) in Swedish politic, through the constitution of waste depositing (2001:512) at year 2001, the rules about management the landfills and leachates tightened. At the landfill Vissberga in the municipality of Hallsberg, a leachate treatment plant was constructed just a year thereafter. This treatment plant consisted of an aerated pond with a following land treatment and a willow cultivation to replace the land treatment during the summer. In this case the parameters, which were estimated as the most important to reduce, were iron and nitrogen. The iron would react with the oxygen-rich water in the aerated pond and precipitate to ferric-hydroxide and than settle in a calm zone of the pond.
ATT TRIGGA KONSUMENTERTILL KÖP : Genom olika säljfrämjande åtgärder
Det finns idag väldigt många olika handelsföretag, vilket medför att konkurrensen om konsumenterna är stenhård. Butiker använder många olika former av marknadsföring för att nå fram till sina respektive målgrupper, marknadsföring är ett väldigt brett begrepp och involverar många olika åtgärder som butiken kan använda sig av. Det här arbetet fokuserar på tre olika former av säljfrämjande åtgärder som är relativt vanliga idag. Det som studeras i denna rapport är huruvida kupongerbjudanden, SMS erbjudanden och erbjudandet ?tag 2 betala för 1? påverkar olika konsumenters beteenden och om de blir mer benägna till köp när de utsätts för dessa.
Luft/luftvärmepump : - Med möjlighet till återvinning
Sweden has long had access to low electricity prices due to the wide availability of hydro and nuclear power. This has now changed because of today's rising electricity rates resulting in increasing heating costs for properties, especially in the properties with electric heating systems."Ankaret" is a parish for "Svenska Alliansmissionen", which is located at "Gullbrannagården".The parish has installed electrical radiators and an exhaust ventilation system that makes the energy demand high due to the large ventilation flows. The building was built as the price of electricity was still low and would reduce energy use today by combining its heating system with an air/air heat pump. The heat pump delivers more heat into the room than the electrical energy that it uses. This lowers the electricity needs.
Kommunikation, uppföljning och tidsplanering inom detaljprojekteringen : Hur projekteringsprocessen kan effektiviseras med små medel
Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.
Generation Y som investerare : en kvantitativ studie om hur generation Y:s karaktäristika påverkar deras investeringsbeteende
Nyanländande Generation Y håller på att positionera sig på arbetsmarknaden och omfattas av individer födda inom intervallet 1980 ? 1995. Det återfinns dessvärre ytterst lite forskning gällande generationens investeringsbeteende. Mestadels av tidigare forskning har hittills handlat om hur tidigare generationer, så som Baby Boomers och Generation X, tenderar att investera. Denna studie har därför försökt bidra till att fylla ut tomrummet i kunskapen beträffande Generation Y.Studien utreder investeringsbeteendet hos Generation Y genom att undersöka hur specifika karaktäristika påverkar deras sä?tt att investera.
Energi- och kostnadseffektiva klimatskal : För lager-, industri- och kontorsbyggnader
A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.