Because of the increasing trends in energy consumption and increased environmental awareness, greater focus has been placed on improvement and development of renewable energy sources. An already proven and accepted method is biogas production from anaerobic digestion at municipal wastewater treatment plants.In the waste water treatment process solid material and dissolved pollutants are separated from the water, forming a sludge. The sludge is separated from the process and stabilized during anaerobic digestion or aerobic aeration. Most often, mesophilic anaerobic digestion is used. Because of degradation by microorganisms, biogas with a high content of methane is formed during the digestion.

Certain types of waste, e.g. bottom ash originating from municipal solid waste incineration (MSWI bottom ash) can be used as road construction materials. A potential problem is the possibility of substances leaching out of the road and spreading in the surrounding groundwater.The aim of this master?s thesis is to conclude whether hydrogeological type settings can be employed to, based on local conditions, provide an estimate of the probable spreading of these substances in the surrounding groundwater, and whether certain types of soils can be identified as being less suitable for the localization of a MSWI bottom ash road. A hydrogeological type setting is defined as a mappable unit with similar hydrogeological properties.

The building sector accounted for around a fourth of the total energy usage in Sweden in year 2010 (Energimyndigheten, 2012). Therefore it has become very interesting to achieve a lower energy usage in residential buildings. One way to achieve that is to build so called passive houses. By being very well insulated and have low leakage through the walls, they can reduce the energy usage for heating with a substantial amount. The first passive house was built during the 90?s in Germany; and in Sweden the first passive house was built in Gothenburg 2001.

This thesis was commissioned by Tekniska verken, Energy Division with the overall aim to investigate the concept of environmental debt and what it means for a business. Furthermore, a sustainable risk and responsibility investigation shall be carried out on the concerned areas. Finally, the priority areas shall be highlighted and proposed actions presented. The Swedish Environmental debt concept was presented in 1992 by Arne Jarnelöv. Environmental debt is defined as restoration costs for environmental damage. In the early days the concept did not take into account who was responsible, but the environmental debts was regarded as a humanity debt to future generations.

This is a pattern project for textiles, with main purpose to develop and challenge my design process and to experiment with a mix of different printing techniques. The goal of the project was to create three textile individuals as representatives of my experiments, inspired by natural surfaces.The world of fashion have been an inspiration and has been the model for these textiles, with its powerful and playful patterns. With the world of fashion as a model, I also chose to work with the materials habotai silk and silk velvet. The qualities of these materials has also been influential in my design language.The work has been very focused on experiementation and exploration, and resulted in three printed fabrics that I have chosen to call Björkalm, Lindstam and Lavbädd..

The aim of this thesis is to give an insight to how work is being pursued within Swedish SMEin the clothing industry. Furthermore we investigate how efforts can proceed withenvironmental questions in a quest for sustainable development and bring clarity in thedifficulties that occur. Through the use of company examples and a description of how theywork we wanted to give stakeholders knowledge in what resources and procedures that areused today on the market. The function of the report is moreover to provide Swedish smalland medium-sized clothing enterprises suggestions and directions of how to advance withinsustainable development.In our theoretical frame we have chosen to administer the theories that we found suitable forour study. Seen from a perspective of sustainability we have thus applied the theories ofstakeholder and legitimacy, an analysis model for a company?s actions in environmentalquestions and the theory of SME which describes a small or middle sized enterprise?s fivecompetitive variables.The empirical frame we acquired for this thesis is presented in three chapters.

A Swedish company, company F, will establish a new factory in China. Company F is adivision within Company F. The factory in China will manufacture wire products. Thepurpose of this final thesis is to analyse which legal and practical measures the company hasto undertake during the process of localization to get approval from the Chineseenvironmental legislation.An analysis of the influencing factors on the environment from the production in theconstruction in Sweden was carried through. A material-balance was analysed according tothe flowchart of the production.

The mining industry, in terms of ore excavation and metal production, is and has been important to the Swedish economy. In connection with the ore excavation process, large amounts of partly sulphidic waste are produced. When the metal sulphides are exposed to air and water they are eventually oxidised, which leads to the formation of acidic water with high concentrations of metal cations and sulphate ions, so called Acid Mine Drainage (AMD). This water may reach the nearest surroundings and cause negative environmental effects. By covering the waste with soil or water, the oxidation process can be minimised. At the Rävlidmyran mine in the county of Västerbotten open pit mining took place between 1951 and 1991.

Under ett samarbete med underklädesbutiken Bornevings har information om textila materialtagits fram. Butiken erbjuder alltid god service när det gäller utprovning av plagg men saknarbaskunskaper om textila material och hur de tillverkas. Textil informationen har tagits framför att underlätta detta problem. Kunskapsbristen kommer nu att eliminerats så personalen kanerbjuda den bästa servicen.För att få reda på hur informationen på bästa sätt skulle redovisas för butiken studeradespedagogik. Inlärning fungerar olika för alla, vissa tar till sig bilder medan andra lättare kanregistrera text.

My working process is craft based and influenced by devotion for the textile material and techniques, but the concept is just as important. I mainly do sculptural objects where I treat fascination, frustration and disgust for the human body from a personal perspective. I am also deeply fascinated with Michael Jackson; an iconic figure that I adore above all else. A man with an inner musical ability, dedicated his entire life to tame and signify it through his body. My master work is an investigation where I look upon similarities and connections between my fascination with the body and the admiration and fascination with Michael Jackson.

This thesis examines how to improve the exhibition of products within retail for clothes and gift articles. The purpose is to investigate and test how light sources and different directions of light affect how the products are perceived regarding their exhibition. Our question formulations are:To what degree does the level of light in combination with the background of the interior design of a shop affect whether a product is perceived more or less attractive?What can we recommend to make the exhibition of products more attractive? From our observations shops nowadays have relatively high levels of light when they expose products on vertical areas. We have looked on the recommendation from ?Energimyndigheten? in order to see what they think is important when designing retail lightening.

This thesis in social anthropology is based on a field study on the Internet exploring Tibetan identity. With a post-modern approach the thesis explores the possibility fora non-tibetan to create a Tibetan Internet identity and become a part of the Tibetan community that exist on the Internet..

Ledningsbanor syftar till att föra ström eller digitala signaler mellan elektroniska komponenter. Traditionellt brukar ledare av solid metall användas, då metall har låg resistans och lämpar sig bra som strömledare. I denna studie utforskas möjlig-heten för olika material att fungera som textila ledningsbanor. Textila ledningsba-nor behövs bland annat i medicinska plagg med sensorer. En ledningsbana som ska vara i ett plagg måste både vara tvättbar och flexibel.

AbstractFalu Copper Mine and Sustainable DevelopmentKarl-Markus AnsnaesFalu copper mine was Sweden?s oldest mine industry which lasted for almost a thousand years. Throughout the history its area has been vastly contaminated by sulfur oxide. The contaminations has created the mining area to an environmental risk zone which has the ability to spread out into the Falu River. The river has its connections to the Dal River which is discharging towards its mouth in the Baltic Sea.

Efficiency has become an important objective for many providers of welfare services. Among Swedish schools, both private and public, increased administrative demands seemingly influence operations, and affect teachers negatively through perceived stress. Simultaneously, Swedish students scored an all-time low in the latest PISA survey, and are now performing below the OECD-average in science, mathematics and reading. A central administrative task in the Swedish elementary school is the parent-teacher conference, which is an important activity in supporting the development of the student's knowledge and social skills. Lean is a well-established operations framework, which has proven successful in order to improve process efficiency.