?Death in the pot.? The Fruit and Vegetable Preserving industry in East Scania during the 20th centuryA Company History.At the end of the twentieth century, only one of the six companies previously active in the Fruit and Vegetable Preserving Industry in East Scania survived as an independent company: Kiviks Musterier AB. Actual production remains at two sites only. The aim of this study is to determine the reasons for this development. The companies included in the investigation are AB Bjäre industrier, Gustaf Bong AB, Kiviks Musterier AB, AB Ruuthsbo konservindustrier, Th.

The aim of this study was to investigate how the process of implementing a quality management system for food safety was handled in four different food producing companies in Sweden. The aim was also to analyze what difficulties the companies face and the possibilities that arise when certified. Furthermore, the reason for implementation was discussed as well as the main expectations on the certificate. Implementing a quality management system is a good way of ensuring the quality and hygiene of the food production and it also increases the traceability of food products through the whole food chain. A food safety standard provides a method of preventing problems and crisis and it can also help to handle requirements from authorities, the market and others.

This research looks into the modern revival of opera based on the study of two recent productions of Giuseppe Verdi?s Don Carlo; the first is the 2010 production at the Gothenburg Opera in Gothenburg, Sweden and the second is the 2013 production at Großes Festspielhaus in Salzburg, Austria. The goal is to discover what aspects a contemporary audience can relate to and identify with and why opera is still relevant today. This has been done partly through a semiotic analysis of the visual image (e.g. set, costume and lightning) and partly through a hermeneutical analysis of the themes in Don Carlo.

Automatic milking systems (AMS) are part of a growing trend in Sweden and the number of milk-producing farms is decreasing rapidly. One main reason for the AMS is its ability to facilitate work for the farmer. The effects of introduction prior to calving have not been documented earlier and farmers are not in agreement, however they seldom see a problem with the introduction. The aim of this report is to find differences between two groups of heifers, where one group is trained i.e. introduced to the AMS before calving and the other group is introduced after calving.

Water is an essential factor for both people and animals, and access to water is therefore of great importance. The water access also largely determines the availability of food for people and feed for animals. The aim of this study was to survey the affect of water access on milk production from dairy animals. The study included nineteen farm visits that were made in the Nyando district in Kenya between February and Mars 2011. Farm visits included interviews with questions about for example number of dairy animals, milk production, water access, feed and water routines.

?Death in the pot.? The Fruit and Vegetable Preserving industry in East Scania during the 20th century A Company History. At the end of the twentieth century, only one of the six companies previously active in the Fruit and Vegetable Preserving Industry in East Scania survived as an independent company: Kiviks Musterier AB. Actual production remains at two sites only. The aim of this study is to determine the reasons for this development. The companies included in the investigation are AB Bjäre industrier, Gustaf Bong AB, Kiviks Musterier AB, AB Ruuthsbo konservindustrier, Th.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

This final thesis aim to create a support that can decrease the uncertainty when planning the cable drum flanges lines that produces cable drums in the interval 100 to 320cm in diameter at Vida Packaging in Hestra. The purpose attains through finding an optimal batch size that minimizes the total storage cost and order prime cost, without degenerate delivery capacity to the customer. Through survey the sale and stock balance development during 2005 and 2006 for cable drums in Hestra and give alternative suggestions how to plan the production after installing a new cable drum flanges line. The study also explores different ways of working during product change in existing nailing line, to minimize the order prime cost. Vida Packaging in Hestra is a part of the Vida group, which is Sweden?s largest privately owned sawmill group with seven sawmills placed all around southern Sweden.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

The world is currently facing a huge severe challenge in handling the issue of climate change. One of the ways to lower the green house gas emissions, which is seen as one of the main contributor to the climate crisis, is to use renewable technologies such as for example photovoltaic (PV) systems. PV-systems are also suitable for so called micro production, small scale energy production facilities, since it can be placed on practically any rooftop with the right solar conditions. In Sweden the usage of PV-systems has not yet gotten any wider spreading, even though the solar radiation conditions are very similar to countries that produce a lot of solar energy, as for example Germany. The aim of this paper is to describe non-adopter perceptions of PV-systems. The study holds a qualitative approach using deep interviews for data collection.

Konkurrensen i tillverkningsfo?retag o?kar sta?ndigt och detta medfo?r att det sta?lls ha?rda krav pa? produktkvalitet och fo?rma?gan att leverera produkter i tid. Fo?r att fo?retag ska kunna na? upp till dessa ma?l kra?vs utveckling och sta?ndiga fo?rba?ttringar i takt med den va?xande marknaden. Detta uppna?s pa? olika sa?tt men ett vanligt sa?tt a?r att arbeta med fo?rba?ttringsmetodiker.

Textilhögskolan är sedan 1982 en del av Högskolan i Borås och har i dagsläget 14 utbildningar varav en är kandidatutbildningen Textil produktutveckling och Entreprenörskap. Utbildningen ger studenterna en förståelse för den textila värdekedjan där de lär sig att hantera processer i produkt- och affärsidéutveckling inom det textila området. Utbildningen bygger på en översikt och inte spetskunskap vilket har resulterat i en ovisshet bland studenter var fokus bör ligga vid karriärval. Detta resulterade i uppsatsens syfte; ?Syftet med denna uppsats är att se hur svagheter och styrkor i den textila värdekedjan kan omsättas i utbildning för att öppna nya arbetsområden inom den textila industrin.? För att undersöka syftet genomfördes ett antal kvalitativa intervjuer med personer insatta i den textila industrin med erfarenhet av Textile management.

This study was conducted at Glimek AB, a company that has chosen to decentralize its central storage unit in order to increase production efficiencies. The purpose of the study was to identify the problems in the production cycle that lead to the decision to decentralize the central storage unit, as well as identifying what the decentralization entails. The effects of the decentralization have not been analyzed in the study, and consequently neither financial nor production disadvantages have been considered.Appropriate questions were formulated based on the chosen underlying theories, and were asked to selected individuals with relevant knowledge. The study is based on the information that was gathered from interviews with management as well as staff within the company. In addition, supporting information such as flowcharts, drawings, orders and decision support documents were supplied by the company.

Due to increasing product availability and higher demands on fast deliveries, the competition between companies is growing. To be able to satisfy the customers? requests an efficient logistics system with short throughput time is required. By using tools associated with Lean production companies are able to make great improvements in their manufacturing systems and reduce lead times to satisfy customer demands.There are two classifications associated with manufacturing, high variety and low volume (HVLV) and low volume and high variety (LVHV). The general belief is that the concept of Lean production is difficult to implement in a production environment with high variety and low volume due to the concept being adapted to mass production.

To achieve the Government's milestones for 2018, which means that 50 % of food waste shall be separated from household waste and undergo biological treatment (composting or anaerobic digestion).   Hultsfred, Högsby and Vimmerby are three adjacent municipalities of Kalmar, county Småland. During 2012 and 2013 analyzes were performed on their household waste to determine its composition. The household waste is currently collected in one fraction. The work, examines how much food waste the household waste contains. From the amount of food waste, the biogas potential is examined - how much food waste biogas generates and how much energy it corresponds to.   Food waste is broken down by microorganisms under anaerobic conditions (anaerobic digestion) in a biogas plant.