Cattle production systems are changing to bigger intensified systems with larger numbers of animals per farm and more free range systems while at the same time employing fewer people. Aversive handling has been known to affect cattle production negatively for many years, but lately scientists have started to focus more on what positive effects gentle handling and positive human-cattle interactions may have on beef and dairy production. Fear can cause high stress in production animals and this can contribute to not only reduced production within beef and dairy cattle, but also increased risks for accidents and decreased animal welfare. Therefore, by reducing the fear cattle experience of humans, it could be possible to increase production, decrease accidents and increase the welfare of the animals. Reducing the animals fear and stress can be done by simple means, such as walking and talking calmly around the cattle, associating humans to positive feelings (such as feed) and stroking the cattle?s body regions associated with social grooming.

The purpose of this essay is to evaluate how the big changes in prices are effecting pigproduction. My calculations show how much there will be left for interests and amortisation. I?ve chosen not to calculate the costs of buildings. The condition from the beginning is a production of pork with 10.000 pigs per year. Instead of buying piglets, I?ve calculated on breeding them and for that purpose I will need 440 sows. I?ve investigated the working hours and given examples of how to decries these. My conclusion is that with the prices we have to day, pork production is a hard business..

Denna uppsats undersöker hur ledarstilen påverkas av anammandet av filosofin inom Lean Production. Syftet är att granska hur ledarna kan kombinera dynamiken bakom ett pedagogiskt ledarskap och medarbetarnas medinflytande med principerna inom Lean Production. Vår uppsats bygger på den empiri vi samlat in genom sex kvalitativa intervjuer med både ledare och medarbetare på tre avdelningar inom tre olika organisationer. De teoretiska utgångspunkter vi använt oss av grundar sig i huvudsak på Arne Malténs dimensioner kring ett pedagogiskt ledarskap. Analysen är sedan strukturerad kring dessa dimensioner.

Angelica archangelica (Garden angelica) is the only Medicinal and Aromatic Plant (MAP) with a Nordic origin. The plant can reach up to three meters when cultivated. Angelica archangelica is used as flavouring in additives, honey, beverage base, essential oils, fol-klore medicine and as ornamental for decorative purposes. Commercial cultivation is mainly focused on root production. Production countries are Poland, Netherland, France, Belgium, Switzerland, and former Czechoslovakia with an overall yearly world production of 1000 kg of essential oils.

This report is a master thesis performed by Adam Lundin at the company Sandvik Coromants production facility in Gimo. The work started in January 2013 and went on for the duration of 20 weeks, which is equivalent to 30 hp. The project was executed at the department GVR10. The scope of the project was to create a base for improvements in the purchasing process of direct material to the production. The background to the project was that the centralized purchasing department has gone through changes and decision was taken to decentralize the purchasing of direct material to Gimo.

Study objects: JM, Folkhem and ABB.Purpose: The purpose with this study are to examine how the supplier relations are in the construction branch and compare that result with how the supplier relations are for ABB a production company.Theoretical: The theoretical chapter illustrates important and relevant parts of supplier relations, purchasing and supplier strategies to give good overview. The theoretical review will combine information from different fields to consent with the research problem.Method: A case study has been made on three different companies, one of the companies was active in the production industry the other two were active in the construction industry. Data was mainly collected through semi structured interviews on each of the three companies.Conclusions: The size of the company decided which point of view the company had on purchasing, traditional or modern view. All three companies had a centralized purchasing organization but the construction firms were more decentralized than the production company. The reason was that the construction firms were dependent with more flexibility when every construction project is unique..

This thesis is a survey and also an investigation of the different factors that affects the cracking that occurs in the inserts at AB Sandvik Coromants production in Gimo. The work that has been done has focused on two main factors, namely, powder characteristics and pressing parameters.AB Sandvik Coromant produces tools and tooling systems for metal cutting. They have some problems in their production of inserts. The problem is that cracks sometimes occur in the body of the insert, after it´s pressed. In order to investigate this, a preliminary study was made in which production principles were studied.

 The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.

The interest for wind power has increased in Sweden. Northern Sweden is especially interesting due to that a new wind resource map shows that there are areas in northern Sweden that have more potential for wind power than what have been known before. Therefore E.ON Vind is interested in finding out if, and where, there are suitable places for establishment of wind power in northern Sweden. The purpose of this master thesis is therefore to perform an inventory of northern Sweden for suitable places for wind power. The master thesis is performed at E.ON Vinds office at Vasagatan in Stockholm.

The Church of Sweden sent during the spring 2010 two documents, Teologiskagrundprinciper för arbetet I 2006 års handboksgrupp and Mässans grundordning forconsideration. The documents are parts in the work with writing a new service-book for theChurch of Sweden. After the documents had been sent for consideration by the dioceses therehas been a discussion about the proposal to make the preparation in the service of HolyCommunion facultative. My main question has been to se if there will be any change of theconfession, faith and doctrine in the Church of Sweden if the preparation becomes facultative.I have seen that the service-book is an expression for the confession of the Church of Sweden,therefore there will be no change of the confession of the Church of Sweden, but a change ofits expression.I have seen that there is no consensus in how the dioceses react over what is written in thetwo documents about the forgiveness and the atonement. My conclusion is that it may bydifficult for the Church of Sweden to fix a new service-book without first fix what the Churchof Sweden means with forgiveness and atonement..

The aim of this study has been to discuss ideas of knowledge within classification theory and subject analysis in the light of theories of fundamental changes in the production of scientific knowledge. Guiding questions have been: How have the conditions of knowledge production changed? How has interdisciplinarity as part of this development evolved? What assumptions lie behind theories of classification and subject analysis? How do these stand in relation to the alleged changes in the production and understanding of science? Three works about the changing conditions for knowledge production and the growth of crossdisciplinarity have been presented and discussed. These works stress the loosening up of boundaries between traditional knowledge domains and open up for discussions about how to organize knowledge production in the light of these changes. In the study it is argued that their works also could open up for discussions about the way knowledge is organized for retrieval purposes.

This diploma work addresses the question of how much energy is spent whenmanufacturing the components of a building as well as of how much energy is used inthe production of a building. The object of the studies is BioCentrum at the SwedishUniversity of Agricultural Sciences in Ultuna just outside the city of Uppsala. The aimof the work was to investigate how much energy was consumed when manufacturingand production in relation to the management, how many years the production wasrepresented. It was also a study in how mature the construction industry is to answerhow much energy was consumed in manufacturing.In order to get these answers a question form was developed and sent to thesuppliers to BioCentrum. In this form they were to respond to the quantity suppliedto BioCentrum and the amount of energy was spent when manufacturing thecomponents.

This report presents the results of a thesis in which the department PL Hus at Grontmij AB isstudied. The study has been done in order to locate problem areas in order to streamline andimprove the quality of working. The study was done by an engineering student from theDepartment of Industrial Management at KTH on behalf of Grontmij AB. The project extendedover a period of 20 weeks during spring 2011.In addition to the Department itself has two project managers in two different projects beenfollowed. The method used has been participant observation and was used to be able to comeclose to reality and thus find problem areas where there are opportunities for development.Validation was made through comments and opinions from workers at Grontmij AB, afterreading the reports analysis.Based on a system and holistic approach has parallels been drawn to the production systems suchas TPS (Toyota Production System) and lean production.

Sitka spruce (Picea sitchensis) is a tree species that have its natural distribution along the West Coast of North America, from Alaska in the north to northern California in the south. Sitka spruce is a typical coastal tree species that can reach heights up to 85 meters and occurs in single pure as well as in mixed stands. The main purposes of this study were to describe the Sitka spruce growing characteristics and the volume production in comparison to spruce (Picea abies). The possibility to predict future volume production by using prognosis tools designed to be used on spruce were also studied. The material that has been used in this study are permanent sitka trials established by the Faculty of Forestry fixed Sitka trials and also material gathered in this study. A literature study was also carried out in order to determine the Sitka spruce growing characteristics. Sitka spruce has a high adaptation and a high volume production on a broad scale of soil types. The tree species is a pioneer species that has a fast early growth and in combination with sharp needles it is less susceptible to animal browsing than spruce. The factor that is the single most limiting factor for where the Sitka spruce can be planted is frost. This factor can be limited by using plant material with a well-suited provenance. According to the literature, the Sitka spruce has an average total volume production that is between 20-40% higher than spruce.

The aim of this study was to investigate the production of knowledge that can emerge in the use of Practice Research by Mirror method. This by finding out what it is in the practical work that leads to the production of knowledge and how knowledge production takes form. The empirical data that form the basis for this study is recorded group within the Mirror method discussions and a focus group interview with social workers who participated in the discussions. Those who have participated are social workers with experience from working with financial aid support and only real cases have been used in the discussions. The results have been analyzed according to Lipsky's theory of street-level bureaucracy and their discretion and Fook and Gardner´s theory of critical reflection.