An automatic control system for calibration of pressure indicators has been constructed. This control system can be used as a complement to the calibration system located at AerotechTelub, division MainPartner, in Linköping. The calibration system used today contains some not wanted pressure changes, which is compensated by hand today. The new system presented in this report automates the calibrating process and simplifies the calibration. Suitable hardware as motor, controls card and so on have been found and software in the form of Visual Basic program has been developed.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Ledarskap i slöjd och kulturhantverk15 hpInstitutionen för kulturvårdGöteborgs universitet2014:33.

The objectives of this research were to determine whether the natural rattan resources in Sulawesi, Indonesia can cope with the strongly increased harvesting pressure that has occurred over the last centuries. I was furthermore looking for patterns in the rattan population dynamics that might give a hint on how the harvesting system could be improved to ensure a maximum sustainable yield. To answer these questions, I developed an individual-based model to analyse the dynamics of rattan growth in connection with rattan harvests by locals to identify sustainable levels of rattan harvests around villages in Sulawesi, Indonesia. Scenarios with different harvesting intensities were run to compare the change in harvest amount. For a given harvesting pressure, scenarios with a high number of harvesters and a low harvesting frequency had the same effect as scenarios with high harvesting frequencies and a low number of harvesters.

In Uppsala CHP Plant, there are six pressure reducing valves to reduce the pressure from 15 to 3 bars, before six absorption heat pumps. During the process the energy is conserved but losses occur in form of exergy. The aim of this thesis is to reduce the losses of exergy. This can be done by letting turbines replace the pressure reducing valves.In this thesis an investigation has been done of the conditions today, the conditions after the change from pressure reducing valves to turbines and a comparison of three different types of turbine solutions. The three examined solutions are one turbine, several helical screw expanders and several small turbines in parallel with asynchronous generators.The six absorption heat pumps have been divided into two groups; one group of four and one group of two absorption heat pumps.

Equine metabolic syndrome (EMS) it?s a clinical condition that includes obesity, regional adiposity, insulin resistance (IR) and laminitis. A similar syndrome exists in human medi-cine, the metabolic syndrome (MS), were systemic hypertension also is a prominent fea-ture. The systemic hypertension seen in humans with MS is partly due to a vascular endo-thelial dysfunction with an enhanced endothelin-1 (ET-1) mediated vasoconstriction. There are indications that systemic hypertension might be a feature in EMS as well but if ET-1 is involved in the development of the systemic hypertension in horses is not known.

Naturen är ett undersökande arbete i att uttrycka och materialisera en stämning baserat på minnen från en kvällsvandring. Jag gestaltar upplevelsen och materialiserar den i textil. Genom att undersöka möten mellan olika textila tekniker vill jag skapa en kollektion som ger en förnimmelse av min naturupplevelse. Text ur Caroline Ringskog Ferrada-Nolis bok Naturen har varit utgångspunkt vid uppbyggnaden av kollektionen. Resultatet är en dynamisk textilkollektion för hemmiljö som innehåller digitaltryck, ausbrenner jacquardväv och en stickad struktur.Nature is an exploratory work on expressing and materializing a mood based on the memories of a night walk.

Stump treatment today requires large quantities of clean water mixed with the protective product Rotstop, to fully cover the stump surface. In order to reduce the water consumption without reducing the coverage of the stump surface, the pressure in the stump treatment device can be increased. Therefore, the Phlebiopsis gigantea (Fr.) Jül. suspension used as a biological control agent to prevent Heterobasidion annosum (Fr.) Bref. infection was pressure-tested.

This is a report written for an examination project C-level, on the subject of energy. The examination project is a product of the FVB Sweden AB (district heating bureau). It started with a meeting with Stefan Jonsson FVB Sweden AB, were he explained the content of the project, and from this a presentation of the problem was made. The problem that needed to be solved was how they could control the valves in the system to provide heating to everyone in the system. The valves are often oversized so the pump in the heating plant would have to be enormous to be able to provide enough flow to be sufficient, if everyone in the system had there valves fully opened. I came up with two solutions to the problem, one was a wireless network that could keep track of the valves and the other solution was an extra sensor that was placed on the radiator.

This report is the result of a diploma work made at IMT at US in Linköping. The purpose of this piece of work is to investigate the possibility to design a general program for data-acquisition using LabVIEW, suiting different hardwares and connections. Great importance has been attached to communication with serialport, using bluetooth, because different wireless PPG-instruments has been developed parallel to this project. These PPG-circuits uses this type of serialcommunication. Communication with USB, GPIB and analog connection has also been examined and analog communication has been tested practically.

This bachelor of economics paper discuss that the increasing globalization has put the small companies in the Swedish textile and clothing industry in a situation where internationalization has become a necessity. Furthermore has the European Union lead to that this type of companies has to seek growth on foreign markets with great socio cultural distance from the home country, Sweden. Nowadays there?s no time to internationalize in the same course of action like before. Before, the Swedish companies begun their operations abroad in fairly nearby countries and only gradually penetrated more far-flung markets.

In industries today the demand for reading the state of industrial equipment and thus prevent machine breakdown, is increasing. The company HMS Industrial Networks AB has a product on the market, Netbiter EC350 that is used to read sensors and thus find out the condition of industrial equipment. By reporting scanned data to users through a cloud service, users can keep track of their equipment. When developing Netbiter EC350 a slot was made for a Bluetooth module to offer clients a wireless reading in future developments. In this project a prototype was made to show how this Bluetooth communication can be implemented. The goal of the project was to create a Bluetooth communication between a Bluetooth sensor and Netbiter EC350. A user interface was made to allow the user to read sensor values. The result of the project shows how a Bluetooth communication can be implemented to read sensors wireless and therefore it fulfills its purpose and goal.

A growing number of companies realise that to achieve their environmental goals and satisfy stakeholder expectations, they need to look beyond their own facilities and to involve their suppliers in environmental initiatives. A life cycle approach means that the production system should be optimised as whole, across national boarders and individual organisations taking part all the way from extraction to disposal. This study is a Life Cycle Inventory of resources used when producing a piece of cotton garment and the method is based on the standardisation series of ISO 14040-43. The area of study, Tamil Nadu the most southern state of India, accounts for more than 90% of India?s knitwear exports to Western Europe.

Background: For the knowledge company the employees? competencies and knowledge are important assets. According to this, there has been a lot discussion about how to best take advantage of the employees? knowledge and create organizational learning. This organizational learning can be difficult to create due to the individuals? own goals and the fast changes in today?s society.

De senaste årens långa och kalla vintrar har lett till ett ökat antal halkolyckor. Genom att undersöka halkolyckors utsträckning samt halkskydd som fanns tillgängliga konstaterades det att ett behov av nya halkskydd fanns. Enkäter för att ge svar på användning av halkskydd togs fram och svar från personer i åldrarna 20-65 visade att man överlag inte använde halkskydd. I stor utsträckning berodde det på halkskyddens dåliga kvalité och den negativa stämpeln som fanns på dem . Textila material undersöktes för att finna lämpliga egenskaper.

The aim of this study was to determine which type of fluid to use in trauma care to improve patient survival. The method used was a systematic review, where a total of 18 studies were reviewed and 13 included in the results. The inclusion criteria used in this study were Randomized controlled trial, or studies relevant for the purpose, written in English and published during the last ten years. The studies were identified in the PubMed data base. The results showed that in trauma with hypovolaemia, colloid infusion has a better effect than infusion of crystalloid fluid on blood pressure and colloid infusion reduced the body's cascade systems in a beneficial way. Colloid infusion administered to head injury patients lowered their intracranial pressure more than crystalloid infusion.