Earlier investigations showed that damages on timber from feeding rolls could be within the lower classes of damage according to VMRs classes. Knowledge about differences in productivity between kind types and aggressive types of feeding rolls is necessary because it should influence the question about damages on timber caused by different feeding rolls. In this study the production and timber damage in a harvesting head were evaluated at three levels of pressure (8, 10 and 14 MPa) on the feeding rolls, and with three different types of rolls. One type, the rubber cushioned steel plate roller had 10 mm studs and rubber damping, one ?middle? type made of solid steel with 14 mm studs, and one aggressive type, also made of solid steel with 18 mm studs.

Studien visar att en positiv onormal avkastning uppstår i och med att kungörelsen av ett noteringsplatsskifte offentliggörs. Den positiva onormala avkastningen återgår från och med det fysiska skiftet till OMX från de mindre noteringsplatserna. En temporär värdeutveckling som stöds av Price pressure hypotesen och som förklaras av handelsvolymförändringar i aktien..

Sahlgrenska Academyat University of GothenburgDepartment of Internal Medicine and Clinical NutritionTitle: Can nutritional support contribute to the healing of pressure ulcers in elderly patients?Author: Anton Kinnander, Sandra SmidelikSupervisor: Elisabet RothenbergExaminer: Anna WinkvistProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: 12-04-11Background The number of elderly patients with co-morbidity is increasing in the western world. It is therefore reasonable to predict increasing incidence and prevalence of pressure ulcers. One study, published 2009, found that as many as 59 % of geriatric patients within the Swedish health care system had developed pressure ulcers. Symptoms vary from mild erythema to severe deep tissue damage and development of pressure varies from hours to weeks.

Rörelseanalys är ett nödvändigt verktyg då det gäller bedömning, uppföljning och diagnos vid alla de sjukdomar som påverkar den mänskliga rörelseapparaten. Idag finns det i Sverige ett fåtal kliniska gånglaboratorier dit patienter kan remitteras för att få en mer detaljerad och objektiv bedömning av deras rörelsemönster. Problemen med dessa gånglaboratorier är att de är förhållandevis dyra och resurskrävande.Avdelningen för Medicinsk Teknik- FoU vid Norrlands Universitetssjukhus har därför initierat ett forskningsprojekt där AnyMo, ett mobilt system för mätningar av rörelsemönster, har utvecklats.Målet med detta examensarbete var att vidareutveckla det befintliga systemet till att simultant kunna mäta hjärtats EKG, då det skulle göra undersökningen mer komplett.De delar som konstruerades i projektet var en EKG-sensor och en Master Unit, som kopplades ihop med en befintlig rörelsesensor (del av AnyMo-systemet). Informationen från sensorerna lagrades lokalt i ett minneskort på systemets Master Unit.Den färdiga produkten testades och utvärderades på en motionscykel vid olika nivåer av fysisk ansträngning och varierande rörelsefrekvens..

Stress and time pressure is more present in todays labor markets. In financial markets a securities broker is forced to take decisions on investments under high cognitive load and under extreme time pressure. The research of decision under risk gained new ground with the development of the prospect theory and gave us new insights to the decision making of men. Prospect theory has shown that people are risk seekers when dealing with loss decisions and risk avert when dealing with profit decisions. The value function are defined over gains and losses.

People live longer. There is a growing need to increase the knowledge of aging and of the need among the elderly for medical care in the near future. As a step towards meeting this need, a survey among the elderly in Skåne is made by the division of Geriatric Medicine in Malmö University Hospital. This survey is called Gott åldrande i Skåne, GÅS. A frequent decease among the elderly is Mild Cognitive Impairment (MCI).

At Forsmarks Kraftgrupp AB (FKA) forces on pipe systems due to transient flow are frequently calculated as a step to verify their structural integrity. In nuclear industries these forces are often calculated with a one dimensional thermal-hydraulic analysis-code called RELAP5. When calculations regarding more complex geometries are needed, the three dimensional code Fluent is often used. This code is highly time consuming and requires large computational power.This projects aim is to compare calculations of pressure, flow and forces carried out by RELAP5 and Fluent for an arbitrary pipe section during transient flow conditions. This has been accomplished by constructing a simple geometry for which a transient flow is simulated in both programs.

During the summer of 2005 more than 80 million articles of clothing from China, were being held in European harbours. This was a consequence of a striking increase of imported textile and clothing articles from China since the turn of the year, which was the time when all quantitative restrictions were extincted on these products. To protect its own market, the EU therefore reintroduced import quotes in the beginning of the summer. China?s accession agreement to the WTO comprehends a number of unique provisional regulations which are exceptional for the country and in conjunction with clauses and exceptions within the GATT and WTO these regulations enabled new restrictions on the trade with textiles and clothings.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Ledarskap i slöjd och kulturhantverk15 hpInstitutionen för kulturvårdGöteborgs universitet !2014:36.

The public sector is a major purchaser of goods and services. By setting requirements for environmental and social considerations in public procurement, an authority has the possibility to use consumer power to influence the actors in a market. The purpose of this paper is to investigate public procurement of textile products in a municipality, in order to gain knowledge about factors that may be important for the use of environmental and social criteria. Håkan Hydén´s (professor in sociology of law) norm model was used as the basis of the analysis, where the conduct was investigated along three dimensions of the norm ? willingness, knowledge and system conditions ? in order to identify underlying factors that can influence the process.The results ? analyzed by using interviews and documents ? show that the procurer's willingness, motivation and knowledge are important factors in this context, as well as the political priority of the municipality.

In modern society globalisation is a fact within all industries, the textile industry included. Due to improvement in areas such as logistics and communication international trade have developed fast. As changes occur rapidly on the global market and companies must adjust and revise their processes in order to stay competitive.Because of the global price reduction consumers around the world expect low-price products, which mean that the companies have to find new ways to produce in a cost-efficient way. To maximize profit most of the textile production is situated in low-cost countries due to its labour-intensive character. It is crucial for fashion companies to allocate their activities in their value-chain effectively in order to reduce lead-times.

Most of the portable electronic devices use a battery as a primary power source. Nowadays, when the applications are becoming smaller and smaller and more power efficient, the designer needs to concentrate more on reducing power consumption, using secondary power sources and introducing power storage devices. Multiple power source availability and a power storage device on the board will make the applications much more useful and efficient in everyday use. This thesis proposes a power supply unit (PSU) for wireless sensor platforms which is capable of supplying a sensor node with energy from multiple sources, as well as status information from the PSU. Present power storage devices, like electric double-layer capacitors (EDLCs) and batteries, have become more and more common as their characteristics have developed.

Både militärt och civilt finns det behov av att kostnadseffektivt kunna övervaka stora områden utan patrullerande vaktpersonal. Den sensor som beskrivs i detta examensarbete är tänkt att utgöra ett robust alternativ till traditionella övervakningssystem eftersom tekniken är billig och kan täcka in stora avstånd.FOI(Totalförsvarets Forskningsinstitut) utvecklar tekniken för sensorn på uppdrag av FMV(Försvarets Materielverk). Ett tidigare examensarbete [1] har utrett en enklare sensor och formulerat teorin för den sensor som den här rapporten behandlar. Sensorn bygger på polarisation och det faktum att en monomodfiber påverkar polarisationen olika beroende på yttre mekaniska påfrestningar. Med hjälp av flera testsignaler med olika polarisation kan tillräckligt mycket information insamlas för att fullständigt beskriva fiberns påverkan på polarisationen.

This research project is based on observing and Analyzing the Role of a textile merchandiser in managing the supply chain of the Home Textiles In The Buying or retailing, in the Mill and with the Agents. The project also "highlights the comparative analysis of the practices by Followed merchandisers into the retailer side, mills and Those In The Agents', on the basis of the Functions Which Supports the supply chain. In the discussion, We Have highlighted Importance Of The Role Played by an agent and by the merchandisers of Buyer and Supplier in Different situation. By our research work we find out The Challenges face by merchandisers And Then we come up with sometime suggestions.This Research Project Has Been Developed by Contacting and Visiting Hemtex, Brink Textiles, by interviewing the merchandisers working in the Industries like Al-Abid Silk Mill . By Analyzing the data & the data through the visits and the interviews, this Research Project Has Been Combined to give in-depth knowledge about the Activities Which merchandisers performer in a mill and into buying a house..

In this Bachelor Thesis (20 p.), we present the history and development of "Intelligent Houses", and most important- explore some of the future possibilities in this area. The project has been carried out through an interdisciplinary cooperation between three different educations at the Blekinge Institute of Technology. By conducting a dialogue with various actors with different professions, we have been trying to identify needs within the concept of "Intelligent Houses", were the end user is not only the tenant or homeowner. Through Participatory Design methods, such as a Future Workshop, we have brought the users together to discuss their own and each others needs and hindrances in their respective work practice, and how intelligent house technology could improve their work conditions. We have also been testing a highly sophisticated CO/CO2/Moisture/Temperature/Enthalpy multi-sensor & controller, originally developed for regulating indoor climate systems. Based on the needs we have found in our fieldwork, we have been looking at possibilities to make multi user solutions with the sensor..