Demag Delaval Industrial Turbomachinery (DDIT AB) i Finspång tillverkar gasturbiner.I dessa finns det ledskenor/skovlar som arbetar i så varma områden att de måste kylas för att få rätt livslängd. Vid nytillverkning och reparation mäts kylflödet genom respektive skovel/ledskena för att säkerställa att flödet och därmed kylningen ligger inom tillåtna gränser. Mätningen görs med hjälp av en flödesrigg.Denna rigg består av en ventil för inställning av luftflöde, utrustning för mätning och reglering av flödet och anslutning för den aktuella komponenten.Vid DDIT har en datorreglerad flödesrigg tagits fram för att användas vid kontroll av ledskenor/skovlar. Riggen fungerar, men tryckregleringen behövde förbättras.I detta arbete har reglerventilen och flödesriggen studerats för att kunna automatisera mätningarna. Olika reglermetoder har utvärderats.För regleringen används PID Control Tools från National Instrument?s LabVIEW®.

The continuous process of urbanization results in demands on research and development for ecological and sustainable city development. Because of this, the current systems for wastewater treatment may have to be improved. In order to evaluate new technologies for municipal wastewater treatment, a development project has been initiated for the new district Hammarby Sjöstad in Stockholm. The project is lead by the company Stockholm Water. High environmental standards have been put up for the district, as it must be twice as good as an ordinary new district.

The main objective of this study was to find out what pedagogical documentation does and to get knowledge of what you may need to consider in order starting a process of change with a focus on pedagogical documentation. To get answers to my questions, the study is based on pedagogical theories from scientists and interviews with three preschool teachers who have different experience on documentation. My main questions were: What characterizes a pedagogical documentation? What tools / materials do I need to do a pedagogical documentation? What is important to consider when starting the process of change with pedagogical documentation? The result shows that pedagogical documentation is an approach that is based on that one is curious, interested, observant, listens, talking and researching with children and colleagues. You give the kids great participation which you can then pick up the children's learning processes and reveals that the business and the children develop according to curriculum objectives.

Under våren år 2013 har Emilia Andersson, en designingenjörsstudent på Högskolan i Skövde, utfört ett produktutvecklingsprojekt i samarbete med HAGS Aneby AB. Syftet med projektet var att utveckla en vippgunga vars storlek skulle vara anpassad för barn i åldrarna 1-3 år. Målet var att vippgungan ska kunna säljas över hela världen samt uppfylla den amerikanska standarden och europastandarden för lekredskap.Projektet inleddes med en förstudie och teori-fas, där bland annat litteraturstudie och konkurrentanalys genomfördes och annan information samlades in för att få djupare kunskaper inom ämnet. Därefter började idéer och koncept genereras, som sedan genomgick utvärderingar, så som användartester, vilket ledde till ett slutkoncept. Konceptet utvärderades med hjälp av bland annat hållfasthetsberäkningar och en antropometrisk analys.Den slutgiltiga vippgungan kan trots anpassningen för åldersgruppen, inte bara användas av 1-3-åringar utan också av äldre barn, tack vare att konstruktion och framförallt handtag ger extra lekvärden.

We chose to base our literature study on the meme phenomena. The meme is a portion of culture that is spread among us from mind to mind. Every time we learn something by copying others we use information that has been passed on from a previous person, that information can be seen as a meme. The theoretical frame for our methodology in our exam paper is founded on Forsberg och Wengström research on literature studies. Our aim is to describe to the reader in depth what a meme is and how they could be helpful in an academic and pedagogical setting. Our study will show how memes are seen predominantly as graphic designs and as artifacts for cultural representation parallel to their imagery.

The school is a place of work where teachers, with different tools, are supposed to teach their students for the future. In the study the teachers? opinions will be lifted when it comes to use of computers as a tool to teach the students how to read and write. The interpretation is that the use of computers is reflecting the development of society and the intention is to find out if computers will be used in a didactic purpose in teaching. We focused on getting knowledge about which different opinions there are among teachers in grade 1-3 when it comes to the use of computers as a tool in teaching how to read and write.

This is a thesis in Personal- och Arbetslivsprogrammet at Dalarna University with thepurpose of evaluating an education initiative in Borlänge kommun. The educationCoaching Leadership is an initiative for the managers in the organization to exercisegood leadership and the education also serves as an incentive for managers. Eightbusiness managers and one from the HR staff have completed the training. Out of thetotal 9 participants in the training, six of them took part in this evaluation. Based on thethesis aim and questions we wanted to explore participants' attitudes to the education,and what skills and abilities they have acquired on the basis of educational goals andcontent.

Purpose The purpose of our study was to investigate the changing nature of volatility during the last 80 years. Like in an American study, we tried to find some trends in the risk of stocks and bonds that would have an impact on the balance of a portfolio of stocks and bonds. At the same time we investigated the influence of inflation on the choice of portfolio. Methods We have used standard statistic tools and formulas to obtain our results. In most cases it was a matter of calculating average and standard deviation.

The purpose of this master thesis is to construct a steering transmission, for a trackedvehicle, containing two hydraulic circuits which are connected. The steeringtransmission should be mechanical to avoid steer-by-wire.BAE Systems Hägglunds has in an earlier study examined a system with two hydraulicpumps and one hydraulic motor, but the safety of the system wasn?t sufficient.To achieve sufficient redundancy there must be two hydraulic motors, which arecontrolled separately. When the two systems are connected in one point, this point is acritical part of the system because it directly affects both circuits. If one of the hydrauliccircuits fails the other should be able to operate independently as a steeringtransmission.

This study is qualitative and will show what?s causing anxiety in a class. Further it will describe how teacher?s act and how they handle when anxiety becomes a problem in the education. How can one as a teacher handle and act in to these disturbing situations? The children, who are anxious, take important time from those students who really need help in their learning.

This master?s thesis was written on the behalf of Saba Frukt och Grönt AB inHelsingborg and is the final part of the Master program in MechanicalEngineering at Halmstad University.The main task was to introduce visual control and increase the rate of concept intwo of the departments of the company. The goal is to come up withimplementation proposals, and if possible to implement one in the near future.The author attacks the problem by using the Six Sigma DMAIC-methodology as itis a clear and structured approach. As a complement Lean-inspired tools are used.After compiling the results from the interviews and benchmarking somesuggestions are made. These are reviewed with stakeholders and a discussion ofhow to go on further was held.

This is the end report of my final exam at Medieteknik. It covers the planning, work process and review of a Flash based web application that I set out to do. The goal was to create a user friendly, interactive e-shop with embedded functionality for playing music, displaying rich media content and researching possible payment solutions, to enable buying music files online. The project involved creating the user interface, the programmatic functionality of a Flash client (an SWF file). Also, setting up an Apache HTTP Server and establishing a working ?bridge? between the Flash client and the web server with Flash Remoting components and AMFPHP.

This thesis was conducted at AB Fredr Wagner in Ösmo in Nynäshamn, Sweden.AB Fredr Wagner provides solutions for the graphic industry and has been asked by acustomer to develop a product that can simplify handling of EUR-pallets, namely amechanical arrangement, further called pallet exchanger that can switch from anempty pallet to a fully loaded one using only hand force.The goal with the thesis was to create design documents for a pallet exchanger, andalso from those documents to manufacture a prototype for testing and evaluation.A field trip was made to the customer, IKAB mailing in Huddinge, where the palletexchanger is thought to be placed. The purpose of this field trip was to get an insightinto the current work condition and need of change, as well as to gather informationregarding the requirements when it comes to size and robustness of the palletexchanger. Existing equipment on the market that can perform similar tasks werestudied in order to find an optimal solution for the actual pallet exchanger.After the field trip and gathering of information the concept generating phase began.The method used for generating concepts was brainstorming. To decide on whichconcept to use, a concept selection matrix was created. The selection criteriaincluded in the matrix came from the requirements for the pallet exchanger.

This is a qualitative case study of young womens? experiences of blogging about One Direction on the social media/microblogging platform Tumblr. The aim of this study was to find out what fan blogging is and why fans blog. We did this by creating an account on Tumblr where we invited young women between the ages of 16?29, who had active fan blogs dedicated to One Direction, to answer an open-ended questionnaire.

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution. The work proceeded with an extensive search for abrasive flow meters along with obtaining information about flow measurement in general. When the search for abrasive flow meters resulted in nothing all the efforts were concentrated on finding a principle of measurement that could cope with the criteria.