Storing kinetic energy in a flywheel allows for more efficient driving of electricvehicles. Research in this area is in progress at Uppsala University, where a flywheelwith magnetic bearings encased in a vacuum chamber is being constructed. To makethis possible methods for measuring the current through the electromagnets in thebearings and temperatures in the flywheel need to be developed. This has been thepurpose of this report. The current measurement resulted in a resistive method, andthe implementation of eight measurement circuits in the system.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

The purpose of this master thesis is to present a model that illuminates the important factors when deriving technical information from market data within a company. For companies to be able to become and stay competitive in the market, product quality is an important factor. Whilst good product quality leads to customer satisfaction and loyalty, lack of quality brings costs in service and replacements. To improve product quality, the developers need information and knowledge about what quality issues affect existing products. Most companies gather data from market about known issues, but in order eliminate known quality issues in new products; this data has to be transformed into information and knowledge.

This paper is a thorough review of my internship, during which I designed infographics at Grafiskt Center, SVT, Stockholm. The purpose has been to find out what guidelines and policies SVT has regarding infographics while producing infographics in a professional environment. In addition, I present the daily routine at SVT and the tools used during the work process. Furthermore, the paper contains a reflection of my work effort during the internship as well as thoughts on how I adjusted to the guidelines in question. Finally, the essay treats some examples of infographics which I produced during my time at SVT..

The market for heavy duty engines is constantly requiring engines that should be more andmore powerful, while still maintaining low fuel consumption. As a result of increasing enginepower, the engine and coolant temperature increases as well due to insufficient coolingperformance (because of design issues, cost etc.).Also, emission legislations, both current and future, require more and more measures to betaken by engine manufacturers. One way of meeting the legislations is the use of cooled EGR(Exhaust Gas Recirculation), which also lead to increased coolant temperatures.Both these factors also naturally lead to increased engine oil temperatures, the consequencesof which are not thoroughly investigated.This thesis project aims to investigate effects of high temperatures on engine oil degradation,with focus on the greatest degradation process: oxidation. To do this several engine runs havebeen performed on a 310 hp engine with EGR to see what happens to the engine oil in a realengine when exposed to high temperatures. During the tests oil samples have been taken andanalysed for important parameters.As a complement to these engine tests some laboratory oxidation testing have also beenperformed, to be able to compare engine test data with laboratory tests.One goal of the project was to try to formulate an empirical oxidation model, which would beable to predict oil oxidation levels in an engine, given any running parameters.

After I heard that two deadly accidents in farming 2003 were created by work with cattle, I got the idea of writing this degree project. So far there are not too many reports written about safety for the worker nor the animal. Therefore it will fit in with a report about safe handling of free stalled cattle. The Swedish Board of Agriculture would also like to do an information material about outside stalled cattle with this degree project as a background. The collecting of material was made by visiting farmers. The goal was to visit 15 ? 20 herds and when this is being written 19 herds have been visited.

The purpose of my study is to investigate whether luck egalitarianism can be savedfrom its inability to draw a line between risks which can reasonably be expected to beavoided, and risk which can not. Such a demarcation is of particular importance forthis influential theory of distributive justice, since it serves to judge whether a personis entitled to compensation for a bad outcome of a taken risk, or not. Testing theintuitiveness and coherence of various contending principles for how to separateavoidable risks from unavoidable ones, I conclude that luck egalitarianism seemsunable to draw a clear line between the two kinds of risks. Instead the theory appearsto be dependent on conceptions of a 'normal life', making it remarkably vague.Furthermore, I argue that luck egalitarianism seems unable to manage without takingsufficientarian and utilitarian concerns into account, for the purpose of decidingwhich risks are avoidable, and which are not..

Purpose: The objective of this study is to illustrate how participants in leaderless based projects communicate with each other. Several studies have focused on technology-supported projects, such as open source projects, with an established project manager and goal. There is a lack, to the best of our knowledge, in studies that deal with the communication pattern in a leaderless computer supported collaborative project.Method: We have chosen to use a quantitative method where we systematically group several messages according to their content. This method was used in a similar study to illustrate the communication between participants involved in an open source project. We have taken the same Kripendorff based method and adapted it to our study by adding more descriptive variables.Theoretical perspectives: Manuel Castell discusses the aspects of a new communication power that is rooted in the individual as part of a larger creative audience.

As a result of today`s competitive situation, the demand on the rapid development of research has increased. Both universities and companies are realizing the importance of a functioning and well-developed cooperation. A close collaboration and communication between universities and the business community has in many studies been shown to be very important for business development and knowledge transfer. The purose was to examine how communication and collaboration between universities and industry can be developed and strenghthen on the basis of innovative thinking. In order to initially identify the perceived problems the authors studied how communication and cooperation manifests itslelf today between the two parties, what does not work and how the existing tools for communication and collaboration look like today.

There are some key elements which distinguish a general operating system, such as Linux, from a Real Time operating system, such as OSE. The later belongs to the category of soft Real Time systems while Linux is a general operating system, with significantly improved real time properties after version 2.6. These improvements make it interesting to compare the two systems.When comparing two operating systems, there are a number of issues which have to be considered. One way to measure the performance of the systems is by studying the time consumption for the same functionality and hardware.During the study, the items that appeared as the most important for the performance of the systems, were: process primitives, system primitives, interprocess communication, context switches and interrupt latency.This work demonstrates that it is possible and reasonable to do performance testing on two different operating systems. The implemented tests cover a number of basic functionalities, which appeared to be the most crucial ones for the performance of the systems..

The aim of this paper has been to examine personas role in the development phase and whether or not some of the criticism that have aroused against personas is valid or not. In this paper we examine the benefits as well as the downsides of working with personas both from a scientific point of view but also from the experiences of a small company located in the north of Sweden. Since personas much like many other powerful tools have pit falls aswell as do's and don'ts this paper looks to clarify what role personas should take aswell as how to minimize risk and maximize the usefulness of personas..

This essay investigates the statements of Växjö municipality?s motives for some of its many environmental projects. The aim of the essay is to be theory-testing as to see how a municipality/city which promotes itself as being ?green? motivates its efforts in the environmental area. Växjö city promotes itself as ?The greenest city in Europe?, an award appointed to the city by BBC and other international media.

Do ceramics have to be static? This was the question that spurred me into this work, and what kept me working on to achieve the possibility of motion in my ceramic objects. By combining the knowledge gained through my former education as an avionics technician with my interest in the ancient ceramic craft, I strive to create kinetic ceramic handicraft suitable for interaction with an audience.By a series of different phases I slowly go from understanding what kind of motion I want my objects to have, to actually realizing this motion in three-dimensional objects. Through the use of simple models made from corrugated fiberboard followed by more advanced plaster models, combined with different complementary materials such as bicycle inner-tubing and recycled aluminium cans among many others, I, through a vast series of testing, slowly build up a knowledge base later applied to the ceramic objects.The result is for me a success; I have found a way for me to combine ceramics with mechanics. Through this I have created kinetic ceramic handicraft intended for interaction with an audience..

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.

AbstractTitle:Lean Production in The Public SectorsLevel:Final assignment for Master of Science in Business Administration.Authors:Simon Mårtensson and Ramnpreet Kaur MaanSupervisor:Stig Sörling and Tomas Källquist.Examiner:Lars-Johan ÅgeDate:2015 ? June.Aim:The use of Lean Production in the public sector is increasing and there are still opportunities for improvement that contributes to a higher customer value. According to previous research that has been done, there is a lack of research in the field of Lean production in the public sector. Thus, the aim of this study is to create an understanding of how Lean production as a concept can help to influence employees to work with continuous improvements and customer value in the public sector.Method:The study has a hermeneutic perspective as a starting point where the substance is studied from an operator approach. We have chosen to build our study with the help of deduction starting with a theoretical framework and then go into the empirical framework.