Today there are many system development projects that break both budget and time plan. Often this depends on defects in the information systems that could have been prevented. The cost of test can in some cases be as high as 50 % of the projects total cost and it's at the same time an important part of development. Test as such has moved its focus from the software it self and its faults to a wider perspective on whole infrastructures of information systems where assure a good quality is important. Sogeti in the Netherlands have developed a test method called TMap (Test Management approach) that can be used for structured testing of information systems.

Syfte: Syftet med den här studien var att undersöka repeterbarheten hos Schirmer I test samt att undersöka om det fanns något samband mellan Schirmer I test och enkäten TERTC-DEQ.Metod: 26 personer deltog i studien. Innan första mättillfället fyllde försökspersonerna i ett informerat samtycke och enkäten TERTC-DEQ. De undersöktes med hjälp av ett biomokroskop och deras ögon graderades med hjälp av Efron och CCLRU grading scales innan första mättillfället. Schirmer I test mättes vid tre tillfällen med en veckas mellanrum.Resultat: Resultatet av mätningarna visade att det var låg repeterbarhet hos Schirmer I test om man utför tre upprepade mätningar. Resultatet visade också en korrelation mellan testresultaten och enkäten TERTC-DEQ (r=-0,6184), det vill säga de försökspersonerna som hade ett högt resultat på Schirmer I test hade också en låg summa på enkäten TERTC-DEQ.

Today there are many system development projects that break both budget and time plan. Often this depends on defects in the information systems that could have been prevented. The cost of test can in some cases be as high as 50 % of the projects total cost and it's at the same time an important part of development. Test as such has moved its focus from the software it self and its faults to a wider perspective on whole infrastructures of information systems where assure a good quality is important. Sogeti in the Netherlands have developed a test method called TMap (Test Management approach) that can be used for structured testing of information systems.

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

The Animal Protection Agency was in 2006, commissioned by the Government to: Evaluate how free range animals in the winter, can be kept and managed with special emphasis to animal welfare. The Animal Protection Agency was closed later in 2006 and the commission moved to the Swedish Board of Agriculture. The keeping of free range out wintered cattle, certain basic requirement are needed: by regulation, cattle should have access to a lying hall or other building that gives protection against aversive weather and wind and should offer a dry and clean lying area. There is a possibility for farmers that get an exemption from this regulation. But cases regarding farms which have had difficulties for this exemption has led to a discussion about if the animals can get the same protection in the nature which is comparable to a lying- hall.

AimThe aim of the present study was to evaluate physical performance according to ?fysprofilen? in skiers of the Swedish mogul ski team and to compare their physical performance at three test occasions during one year.MethodsAll eight elite mogul skiers at the Swedish national mogul ski team during the seasons 2011/2012 and 2012/2013 participated voluntarily in this study. The test battery ?fysprofilen? was performed at three test occasions, October 2011, May 2012 and October 2012. Muscle strength was evaluated with squats, bench press and grip strength; power was evaluated with power clean, squat jump, countermovement jump with and without arm swing, Harre´s test and the 30 meters sprint.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

Small scale internal consumer tests provide a company with a cheap way to get valuable information regarding their products advantages and flaws. Therefore the demand for possibilities to do this kind of test has increased. This report is part of a new sensory project at Unilever. It presents a method for sensory comparison of the company?s own products with the corresponding competitor products.

The occurrence of small amounts of albumin in urine, microalbuminuria (MA), is used both in human- and veterinary medicine as an indicator for patients who have developing proteinuria. Proteinuria can be prerenal, renal or postrenal which is important to establish during an investigation. With conventional methods decreased renal function is not detected until 70 % of renal function is lost. The ability to detect and start a treatment earlier might reverse or slow the progression of disease. The purpose of this study was to investigate the reliability of Heska® E.R.D.-Health Screen?, a test for microalbuminuria in dogs, to detect albuminuria.

Testing has always been an important task in the scope of software quality. Though it has never been as much appreciated within the management of the organisations as the software development has. However testing is becoming more attractive within organisations because it becomes more evident how much money working systems saves in contrast to defect ones. A tester often use testing tools to simplify the work progress. There are a lot of tools nowadays but not many evaluating models which helps the tester to know which one to recommend.

A speech-based material that early can assess a child's hearing is needed to provide an indication of a hearing impaired child's language development. Being able to identify and discriminate between different sounds is a requirement for interpreting speech. Hearing assessments that examine speech perception can therefore, unlike, for example, pure tone audiometry, examine a hearing impaired child's perceptual language skills and provide a basis for intervention.The purpose of this work is to evaluate a new auditory material on 3-year-old children. The auditory material is based on the Ling-6-sounds and the main question was which of the sounds in the test were adequate for test of discrimination. Furthermore, it was investigated how the test works with children aged 3:0?3:11 years and how age and gender affect the result.Twenty-four children aged 3:0?3:11 years were tested using a computer based test.

This C-essay focuses its research on the taste of guitarplaying and non-guitarplaying soundengineers, in using single or dual microphone setups when recording electric guitar. It will be shown if there is a significant difference in taste when using one or two microphones between the two testsubject groups. Two classical microphone setups have been used for the test of this essay, which includes a blind listening test. The information in this test will benefit both guitarplaying and non-guitarplaying engineers by getting greater knowledge regarding what kind of microphone setups to use for different occations. The findings in this essay show in general, that guitarplaying and non-guitarplaying engineers between the ages of 19 - 26 don?t have a specific taste between single or dual microphone setups when subjected to the blind listening test..

The purpose of this essay has been to investigate if the national test results, in the subject of Swedish B at upper secondary school, are affecting a student?s final grade in varied degree among different teachers. The purpose has also been to investigate if the assessment of these tests is equivalent among different teachers. This particular investigation showed that there are big differences between how teachers grade, in relation to achieved results on the national test. According to the Swedish National Agency for Education, the teacher should take all performance information available into consideration for each particular student.

Test for Auditory Comprehension of Language -3 is an American picturebasedtest developed to examine children?s auditory comprehension of language.The aim of the study was to create a translation and to examine if the test wouldcontribute to the information about a child´s language comprehension received bysimilar tests that are used today. In the present study the test items were translatedinto Swedish. The translation was evaluated with 32 children in three different agegroups at a school in central Gothenburg. A linguistic examination of thetranslation and a list of the grammatical structures that are tested were made.

Our task was to create a virtual test bench for verifying memory addresses in our commissioning body?s models. The purpose with the testbench was that it should be created in such a way that it would be easy to change the device under test without any major changes in the testbench.To solve the problem that the testbench had to be able to verify different devices we had to create a general enviroment for how the testbench had to be composed. By doing an analysis of which com-ponents that are usually included in a testbench and which components that were necessary in our project we came up with a generall enviroment for the testbench. Our result was a testbench with the follwing basic functions:* Read from a file that contains read and write operations to the Device Under Test (DUT).* Apply the stimulus to the device* Read the results from the device* Compare the results with wanted values* Generate a log file which contains information about the simulation result..