Osseointegrated titanium implants have become a commonly used method in edentulous jaws and today there are success rates in the magnitude of 82 % in the lower jaw and 98 % in the upper. During first year after implantation a fully normal marginal bone loss of 1-2 mm occurs. If the bone loss continues there is a risk of implant failure. High tensions in bone and inflammation caused by bacteria are possible reasons for this problem. It has been shown that a leakage of bacterias occurs between the parts of the implant and there are theories that this has effects on the marginal bone loss. The aim of this thesis has been to increase the knowledge about microbial leakage with help of in vitro tests and virtual simulations.

The aim of this study is to investigate how the Swedish language proficiency of pupils in vocational programmes in 1977 was measured and assessed with the aid of a national achievement test, and to investigate whether vocational pupils today, in 2014, have similar language proficiency to that of pupils in the 1970s. The study also discusses how the design of the national achievement test from 1977 reflects the view of knowledge that prevailed in society and in the policy documents. The material for the study consists of a total of 75 national achievement tests, 40 of which were taken by pupils on a vocational programme in 1977 and 35 by pupils on a vocational programme in 2014. The national achievement test consists of two parts, the first of which focuses on isolated elements of language proficiency, while the second involves free text production. The material was analysed quantitatively in accordance with the correction material from 1977.

This report aims at giving you as a reader a basic knowledge in measurement techniques used in the road/land construction and witch instrument and methods that is commonly used. It also tries to shed light on the problem with unfinished or incomplete blueprints, which cause additional work performed by the surveyor. This report is written in collaboration with PEAB Umeå whom has given insight in their work.The goal of this report is to examine what kind of work surveyors has to perform on blueprints delivered by a technical consultant. The reader of this report gets a run-through of the different theoretical measurement techniques used today and a short explanation of different measuring instruments used by surveyors in their day to day work. Computer programs used in the field of construction are briefly explained, and some of the most common file extensions used, for example dwg and Land-xml.The report concludes in a questionnaire that was sent out to surveyors employed by PEAB.

The master thesis, conducted at Metrima AB, concerns the development of a non-intrusivedistribution meter as a basis for individual tap water billing in apartments.The project is conducted in response to the market interest in individual tap water billing inapartments as an answer to environmental concerns regarding water consumption. Due to thehigh installation cost of traditional water meters, a new method of determining waterconsumption, without having to cut water pipes, is proposed.The proposed method distributes the total water consumption for an apartment complex toindividual apartments according to distribution meters, measuring water run-time, in eachapartment. The water run-time is estimated by measuring the water pipe?s outward vibrationsand temperature changes.A test environment was established and a prototype built, using a tilt- and vibration sensor forvibration sensing and a precision temperature sensor to measure temperature changes. As bothsensors work well in the test environment, further testing was done in 3 apartments for aduration of 5 days.

This master?s thesis was performed at PartnerTech AB in Åtvidaberg. It addresses the problem of managing test results obtained from testing electronics manufactured by PartnerTech. PartnerTech has developed a test system, called Tor, which performs tests on manufactured boards and stores the test results in files. The Tor system consists of both hardware and software part, where the software runs on an ordinary PC with MS DOS/Windows 2000.

The construction industry in Sweden has in the past 50 years had a low progress in efficiency. With a greater competition from construction firms from other countries, it is necessary to maintain the profit for Swedish construction firms. This is possible with a higher feedback of experience. This diploma work thesis examines how the two construction companies NCC and Skanska in Uppsala, Sweden handle experience feedback from previous projects and the extent to which the experience is spread and used in future projects. In this work, we examined directorial documents to see how employees shall work with feedback.

AbstractThis paper aims to examine reading comprehension among Swedish Upper Secondary Schoolstudents who are doing their last school year. My research questions are if the students havesufficient reading comprehension to cope with university studies and higher educationaccording to a comprehension test and if there is a difference between students who studiedSwedish B course or Swedish as a second language B course. Furthermore it involves issuesof differences in results depending on gender and if the second-language students were bornin Sweden or abroad.To get answers to my questions, I let 112 students in my survey carry out the readingcomprehension part of the TISUS test, observed several test sessions, and interviewed 24students who participated in the test. The result shows that most students have difficultieswith the reading comprehension, and probably would find it difficult to study at universitiesor colleges. There are major differences in the results between the Swedish B-students andSwedish as a second language students, but also within these groupings.

Prioritisation of software requirements is a critical part of the development of software. Whichrequirements and in which order they will be developed is one of the main tasks that requirementprioritisation supports.There are different ways that a requirement prioritisation can be used, for example alone or in agroup and with different methods.The purpose of this report is to map out how you can carry out a requirement prioritisation alonewith different types of prioritisation methods and how you solve the problems that can arise whenprioritisting requirements. This is done by documenting the use of three different types of methodsthat can be execute alone. The methods are "100-dollar test", "Ranking" and "Top-tenrequirements".To be able to prioritise requirements, you need to establish which requirements you shall prioritise.The paper retrieves this information by interviewing stakeholders in the system and analysing theresult of the interviews and the execution of the requirement prioritisation.Three problems arose during that work and I present solutions on these problems. The problemswere 1) equivalent requirements when using the "100-dollar test", 2) low differentiation gradebetween the prioritised requirements in the "100-dollar test" and 3) that the requirements that wereprioritised weren't classified before the prioritisation, which leads to inaccuracies in the resultingprioritisation.The solution to the problems that the paper presents is to increase the amount of distributable unitsin the "100-dollar test" to 1000 per requirement, suggestions of classes of the requirements andthe combination of the methods "100-dollar test" and "ranking" to bypass the equivalentrequirements.The report is written in Swedish.Nyckelord: GoTRIS, requirements retrieval, requirements analysis, Viktoria Swedish ICT,requirements prioritisation, requirements, 100-dollar test, ranking, top 10 requirements..

The productiontime in the construction industry contains of many different participants which will take part in different events. When there is so many people working with the same project it is easy tosee one self just as a part of the game. The consequence of this is that they don?t see themselves as important participants whos knowledge, opinions and experience can be useful in the whole production process. This might lead to that they feel neglected and the consequence of that will be lackof motivation.

The aim of this study was to give an insight of the construction of girls in their relationships with friends and lovers in the Swedish magazine Julia. The magazine turns to girls of age nine to fourteen. The research questions were 1) What is the construction of the girls in their relationships with friends and lovers about in Julia? 2) How are girls constructed in their relationships with friends and lovers? Three issues of the magazine from the winter of 2014 were selected as material for the study. Critical discourse analysis (Fairclough, 1992, 2010) was the point of departure in the analysis.

The purpose of this report is to find a model of statistics for construction and demolition waste, which makes it useful for the local manager at the building site. The intention with the model is that it will be used as a support of the local manager, to direct his project towards reduced strain of the environment. The model will also be used to make it easier to control that the claims from authority and aims for the environment are achieved. To familiarise with the subject waste handling within the building and construction sectorI have done a literature search. I have also been studying rules and regulations regarding the waste handling.

The purpose of this study was to evaluate if verbal encouragement had any influence on handstrength measurements. Twenty subjects participated in the study, all women between the age of 20 and 62 years. A standardisation of testing conditions and verbal encouragement were designed. Three measurements were conducted during two days using T.K.K 5401 Grip D. First there was a trial set, and then Test 1 (without verbal encouragement) and Test 2 (with verbal encouragement) were conducted.

Modern semiconductor design methods makes it possible to design increasingly complex system-on-a-chips (SOCs). Testing such SOCs becomes highly expensive due to the rapidly increasing test data volumes with longer test times as a result. Several approaches exist to compress the test stimuli and where hardware is added for decompression. This master?s thesis presents a test data compression method based on a modified facsimile code.

This essay examines the differences and similarities, weaknesses and strengths of the two Cognitive Semantic theories Conceptual Metaphor Theory and Principled Polysemy Approach to Meaning Analysis. To illustrate the two theories, the Swedish verb-particle construction "gå upp" is examined and analyzed accordingly. The results showed differences in the number of polysemous meaning found. The methodological evaluation showed that the differences in the underlying ideas concerning meaning-construction behind these two theories make them incompatible..

Idre Fjäll currently has not full control of how visitors experience their site or if it has good usability. I have helped the company to do a usability test on their website to see how and where any improvements can be made on the page before the winter season 2010. I have also done a survey to investigate how users perceive Idre Fjälls website. Ten people of various ages participated in the survey. All test subjects was recorded with both audio and screen activity during the tests.