Arvika Fjärrvärme AB, a district heating company from Arvika, today cover 74 % of their total energy production with biofuel wich runs a 16 MW bioler giving process water at saturated liquid state.In recent years Vaporel AB has introduced a new tecnique that gives an external generation of steam after boilers. The concept is built on an adiabatic pressure drop of the saturated liquid in a so called Flashbox which makes a small part of the liquid to evaporate. The generated steam is lead into a turbine where electricity is in a conventional manner.The purpose with this rapport was to do a basic study for the specific system at Arvika where it?s possible to see the potential production of electricity that follows an installation of a flasbox.The final goal was to introduce an economic analysis of a flashox installation at given conditions.To reach our goals we have created a model in Excel where we used the given conditions at Arvika Fjärrvärme to do our calculations. The model has been tested at three different states, of process water returning to potboiler, to be able to decide the optimal operation for the system at present.The studies have resulted in a pressure of the processwater at 14,5 bar (at) and a pressuredrop to 9,5 bar (at) in the flashbox.

Rapporten avser att undersöka vilka olika lösningar det finns att tillgå då Windows Vista skall rullas ut till ett antal klientdatorer. Information om de olika produkterna presenteras samt praktiska laborationer med resultat. Slutligen görs en bedömning av vilken produkt eller lösning som lämpar sig bäst för ett litet företag med få klienter respektive ett stort företag med många klienter. Slutsatsen innehåller våra rekommendationer för hur utrullningen bör ske. Arbetet resulterade i att vi kunde utefter våra laborationer fatta beslutet att Ghost Solution Suite passar bäst för ett mindre företag medan Microsofts lösningar lämpar sig mer när företagen kommer upp i många klienter.

A today common soil reinforcement method is the installation of lime-cement columns. Lime-cement columns have been used since the 1970?s and have been a useful method for stabilizing soil at great depths. It is mostly used for stabilizing road and railway embankments because the method is economically viable and the columns are easy to install. The total costs for the installation of the lime-cement columns is dependent on the numbers of installed columns, what percentage of lime and cement that has been used and the pattern in which the columns has been installed.

The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.

The purpose of this master thesis has been to explore how Skanska Installation can be organized and managed from a Feedback of experience perspective, and define how an IT solution for knowledge management can be designed by identifying the company's current needs in communications, structural capital and information management.The study follows a deductive approach with a qualitative starting point. Using the literature  studies  the theoretical references were built, which is of great importance when using  a deductive approach.Furthermore the report is based on a case study on two different projects: Herrgården and Nattsländan. With the collected empirical data from the case  study the analysis was carried out with the theoretical framework as a basis. This finally led to the conclusions of the study.The purpose of a communications plan is to show how the communication between employees must be managed to best move the project forward. Emphasis is placed on the formal and informal communication of the company.

Ask any constructional worker and there is a high probability that this person knows a colleague with pain or other disorders caused by working with power tools.According to the Swedish Work Environment Authority 71 percent of the Swedish constructional workers is exposed to vibrations at least 25 percent of the working hours. Despite this, the number of reported occupational sicknesses caused by vibrations is as low as 1, 4 percent.JM Ltd. is one of the largest constructional companies in Sweden. Their main business is new housing and development of residential areas. God quality and low impact on the environment is a part of great importance in the company?s long-term goals.

Piled friction soil show a set-up which is increasing with the time after installation. The cost could be reduced if the set-up had been taken into account when designing but in Sweden it is very unusual to do that. Previous studies showed that set-up can vary between 25 % and 75 % during the first 90 days after pile installation. This showed that the effect of the phenomenon is difficult to predict. A study involving five projects have been carried out by specifying certain parameters like pile type, method for pile installation and test method for measure the bearing capacity in friction soils located in Sweden.

The purpose of this thesis is to investigate the possibilities for shore side electricity in the ports of Västerås and Köping. A technical solution to connect the vessels to the local grid is suggested and the investigation is also aiming at an understanding of how the environment is affected by the use of shore side electricity. Furthermore, the costs of shore side electricity are considered.The maximum power demand of a vessel visiting the ports today is relatively small, but the ships visiting the ports in the future might have a larger power demand. The suggested dimension for the system is 5 MW and the result shows that the shore side electricity requires the power distribution to the ports to be expanded. The most useful solution in the ports is to connect the ships with 12 kV from a connection box in a pit at the quay.The investigation of the costs shows that it is cheaper for the ships to use electricity compared to the marine fuel.

I detta examensarbete intervjuas föräldrar till barn som använder bilbarnstol samt även en butiksansvarig som säljer sådana stolar. Målsättningen var att få ökad insikt om kunskapsöverföringen i relation till användning och installation av bilbarnstolar. Detta är ett relevant område att studera med ett kvalitativt angreppssätt beroende på att merparten av existerande undersökningar är kvantitativa samt det faktum att nämnda undersökningar samt statistik tydligt visar vikten av förbättringar på området. Som förberedelse och bas för intervjuerna genomfördes litteraturstudier avseende kunskapsöverföring och bilbarnstolsproblematiken. Resultatet av detta arbete visar bland annat att deltagarna exponerats för korrekt information men att den inte alltid omvandlats till faktisk kunskap och i vissa fall finns praktiska problem som gör att föräldrarnas agerande inte fullt ut överensstämmer med vad de har lärt sig.

Med ett energikombinat vid Lillesjöverket vill Uddevalla Energi energieffektivisera samt sänka temperatur på återkommande fjärrvärmevatten, för att kunna utnyttja rökgaskondensorn effektivare. Uppdraget var att utreda mängden tillgänglig energi under sommarhalvåret och utföra en matematisk kalkyl som ska ligga till grund för val av tork. Valet stod mellan två alternativ av tork där storlek på värmeväxlararea och investeringskostnad skilde dem åt. Sedan följde dimensionering av fjärrvärmeledning samt cirkulationspump från fjärrvärmenätet till tork. Syftet var att ge Uddevalla Energi ett tekniskt beslutsunderlag för val av storlek på tork samt dimensionering av energiöverföring till densamma.

Abstrakt -  As energy prices rise, energy-saving in buildings is becoming increasingly important. By applying different construction and installation technologies, to new buildings the energy consumption can be reduced effectively, compared to similar existing buildings. These technical measures are often an investment in the long term and will reduce energy costs significantly. The purpose of this report is to show how to reduce energy consumption in a small house. It is presented in this report that both building's technical saving arrangements (the sealing of a building) and an installation technical arrangement (changing from the F-system to the FTX-system) would reduce energy consumption in newly built detached houses, if compared with a similar existing house but without these technical measures. The report presents also detailed calculations showing how much energy an existing 2-storey house, built in the year 2007 in Eskilstuna, consumes and how much energy would be saved if these corrective measures were applied to a new building. It is also reported how much money would be saved each year over a 10 year period if the measures were applied. The results show that both solutions are a good investment in the reduction of energy consumption and hence the cost involved. Keywords: energy, heat energy, infiltration, FTX-system, free temperature effectively. .

In Sweden, a big part of the energy use is used in the housing sector. Political goals and targets are set up which the housing sector needs to work towards. Apartment buildings are a major part of the housing sector in Sweden and therefore reduction of energy use in these kinds of buildings are key to lower the energy use in Sweden. But there are not only political incentives to reduce the energy use. Some energy?saving measures are directly profitable and should thus be performed.

Parallellhandel innebär kommersiell vidareförsäljning där handeln sker vid sidan om de etablerade distributionsleden. Parallellhandel är Enligt EU-fördraget om fri varurörelse en laglig form av handel mellan länder inom EU/EES. Handelsagenturer som är en aktör i ett distributionsled måste därmed skapa konkurrensfördelar för att deras kunder inte ska parallellhandla. Uppsatsen behandlar därmed hur handelsagenturer arbetar med att tillföra mervärde till sina återförsäljare vilket de gör genom att differentiera sig i distributionen. Mervärde innebär att kunderna erbjuds något utöver kärnprodukten och tillförandet av mervärde är en viktig faktor för att stå sig mot konkurrens.Syftet med denna uppsats är att belysa de mervärden handelsagenturer tillför för att konkurrera med parallellhandel.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.