A patient simulator for testing anaesthesia machines has been developed at Maquet Critical Care AB, to reduce costly and time-consuming experiments on animals. The device simulates human lungs regarding lung dynamics and volume, uptake of anaesthetic agents and the production of carbon dioxide, heat and moisture. Further demands on the simulator are durability and size; the device shall be compact enough to be moveable.The resulting simulator fulfils the requirements and enables better repeatability and ability to test extreme cases than experiments on animals do.Uptake of the anaesthetic agent is achieved in a active carbon filter and controlled by regulating the flow. The flow is created by a regenerative blower and controlled using a proportional valve. The uptake can be set by the user or by a simple uptake model modified to recursively handle changes in the concentration of anaesthetic agent.Carbon dioxide is fed into the system from a tank by a mass flow regulator.

When beef calves are weaned abruptly at 5 to 6 months of age this triggers a strong stress reaction, since the animals have not yet untied the bonds to their mothers or stopped suckling. This is displayed as extensive vocalization and restlessness. Attempts to diminish the negative effects of weaning on sucking calves have been showing varying results. The study presented here emanates from the observation that when calves are weaned without human interference they are only prevented from suckling, but are still allowed to have social contacts with their mothers. The hypothesis was that calves weaned in two steps would be calmer, gain more weight, and be healthier than animals that were abruptly weaned. To investigate this, 15 calves where weaned in two stages (Group 2), by fitting the calves with nose tags that prevented them from suckling during 5 days prior to the separation of the cows and calves.

Carbon dioxide in the atmosphere contributes to the greenhouse effect, which is essential tolife on our planet. Furthermore, it plays an important part of the photosynthesis andrespiration of the world?s organisms. Since the start of the industrial revolution the amount ofcarbon dioxide in the atmosphere has increased exponentially. The main source is theextensive burning of fossil fuels.

Mechanical harvesting may result in timber damages leading to reduced saw log quality. The initiator of this study was VIDA ? a privately owned concern operating in the value-adding process industry of forest raw materials. The aim of this study was to examine the type and amount of damages on Alvestakubb caused by the harvester head during the cutting process. The aim was also to compare the damages caused by different types of feed rollers and to evaluate the effects of Temperature on damage occurrence.

The decomposition of organic carbon in drained peat soils is a major source of carbon di-oxide in Sweden. A big part of these drained peat soils are used in agriculture and it is a big challenge to slow down their decomposition. It has earlier been thought that less tilling and higher water table levels would decrease the activity of soil microbes and thereby the decomposition, but recent experiments has showed that this has little or no effect. In this bachelor thesis a field experiment was made on drained peat soil with ley, outside Björklinge, Uppsala municipality, Sweden. The experiment was carried out in May 2011. The objective was to develop a method to examine how the net exchange of carbon diox-ide from plant covered peat soil is affected by Temperature and photosynthetically active radiation (PAR).

Hammarby Sjöstad is a new district of southern Stockholm built with focus on reduced environmental impact by recirculation of materials and sustainability. The environmental goals aim to cut the water consumption by half and a separate storm water treatment. Thus, the wastewater will be more concentrated and will originate from the households only. The Sjöstad project includes the idea of a local treatment plant for the household wastewater. To evaluate this possibility, Sjöstadsverket, an experimental treatment plant was constructed.

Persistent pink in beef patties and hamburgers is a problem in the meat industry that has been known for a few decades. It is a costly problem as it can give rejections of food by consumers. Studies around the world have tried to solve the problem but it still remains a mystery. There are many different theories of what is causing the red colour. Some of the most likly theories are reducing hemocromes, high microbiological loads, contamination of nitrite or organic/non organic substanses, DFD meat etc.

The starting point for this master thesis was the product of the company "Humlegården", which allows its tenants in office buildings to follow their electricity consumption in real time, through their Smartphone's. The idea that resulted from that application is to investigate if it is possible to direct the tenants in office buildings to reduce their energy consumptions, but also to be satisfied with the indoor environment. This work addresses the factors which are the main energy consumers in office buildings. It addresses legal requirements and standards which are important to follow in order to achieve good thermal comfort in buildings. Some of them are physical climate factors like thermal environment, air quality and lightning.

To establish good horse welfare there are several factors that need to be considered. One important factor is the environment in which the horses are kept. In Sweden horses are stabled during long periods of time in the cold season and consequently the stable environment is even more important. The most essential environmental factors in a horse stable are ambient Temperature, relative humidity (RH) and concentrations of contaminants in the stable air. The air in a horse stable contains dust, noxious gases, moulds and microorganisms which all can contribute to developing respiratory diseases in horses.

ICA is the largest general dealer in the Swedish market as well as the largest supplier to the independent ICA-dealers. The principal and one of the biggest stakeholders of this thesis is the department Supply Chain Development who is responsible for the development of ICA?s Supply Chain.The purpose of this study is to examine how ICA?s sales are affected by weather and to make recommendations on how ICA should proceed with its work regarding this issue. By leveraging their forecasts by including weather, ICA hopes that their logistical metrics amount of spoilage, service levels and number of inventory days will improve. This thesis describes how ICA is working with weather currently, and furthermore it discusses the existing literature within this area.

By using steady-state measurements for predicting emissions under a dynamic drive cycle wouldsave a lot of time and money for the exhaust aftertreatment specialists at Volvo cars. The idea forthis thesis has been to investigate if statistical regression models can be used with good accuracy.Questions included are for example if common operating variables such as engine speed, air-fuelratio etc. is sufficient to predict engine-out emissions over the engine operating range with goodaccuracy. Focus was set on the modelling of warm engine, but also the more complex engineheat-up phase was investigated since it is a great contributor to total emissions. While NOxcouldnot be measured because of malfunctioning measurement equipment, only HC, CO andTemperature at inlet of first catalytic converter has been modelled.

More often consumers demand instant dry soup that can be prepared with a water Temperature below 100o C, which is currently not possible, because the dry soup becomes too thin when using water with a lower Temperature. In this study, various kinds of starch studies were made to optimize the starch used in the existing product to make it more viscous at both high and low Temperatures. The result was that one of the two starches present in the existing product was retained by change in quantity as it contributed to important flavor parameters. The second was removed and replaced with a starch that made the product more viscous at lower Temperatures. To find out if the new product differed from the existing product a viscosity measurement and a sensory paired preference test were made.

The following project has been made in collaboration with, Denator AB, a biotechnology enterprise. One-dimensional electrophoreses have been used to analyze protein contents of tissue samples. Tissue samples have been either treated according to the company´s newly developed tissue treatment technique or not treated at all and comparisons between these samples have been made. In order to see differences in protein patterns between samples more clearly, a conversion method has been developed where electrophoresis gel visual patterns are used to produce curves, similar to densitometer curves.Denator AB would like to know if the proteins in their treated samples will change visibly over 48 h when incubated at room Temperature. This has been investigated using the above mentioned method.

As break downs of production transformers are costly and often result in long outages it is essential for reliability of operation that the transformers are manufactured to be robust. The aim of this M.Sc. thesis is to investigate if deviations should be made from the standard IEC 60076 ? Power Transformers in order to describe a robust large power transformer for procurement.The investigation has been conducted in three stages. In the first stage a definition of the term robust was developed in consultation with the client Vattenfall Vattenkraft.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which theTemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the Temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.