This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including Temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, Temperature and humidity.

The purpose of this report was to investigate how the abiotic factors (Temperature, pH, nutrients, oxygen levels and water content) would affect the decomposition of oil-contaminated soil and how a variance in structured soil would affect the decomposition-rate. A minor field-study was made and soil where structured in five different ways (one was a default pile and was used as a reference). The study took place over 137 days and three samples were taken (start, middle, end) and analyzed for aromatic and aliphatic compounds. The result of this study shows that there is a significant difference between all methods for the aliphatic compounds and no significant difference for the aromatic compounds. The abiotic factors that affect decomposition vary from organism to organism, depending on what type of environment it will function the best.

For centuries, springs have played a significant role in our society as water supplies, reasons for where to settle down, and in folklore. There are different reasons why and where a spring forms, e.g. in what kind of soil it has its outflow. Geographic and geochemical surroundings have an influence on spring-water quality.For this project some of the springs in the Lagga perish, Knivsta municipality, Sweden, were selected for a closer study. Water samples were collected from springs for analysis.

Twitching is frequently used in horse management because of its sedating and pain-relieving effects. In this study, the effects on the horse?s nervous system by twitching were investigated by thermography of the skin Temperature. The Temperature is regulated by the sympathetic nervous system through postganglionic sfincters at the capillaries of the skin. The effects on the endocrine activity have also been studied by the measuring of ACTH and cortisol in blood plasma.

This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including Temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, Temperature and humidity.

The background of this work is the media discussion about the effect of cultivation on peatsoils on greenhouse gas emissions. It has been argued that row sown and intensivelycultivated crops such as carrots are more likely to emit carbon dioxide than for example grassleys. The association KRAV (an association promoting organic farming) shall, from this yearadapt their environmental policy to be more climate smart and have asked the question if thecultivation of some crops is more climate smart than others? Carbon dioxide emissions fromsoil are due to degradation of organic material and the rate is controlled by microbial activity.The microbial activity is determined by a variety of factors such as Temperature, soil organicmatter quality and water content. I have measured the carbon dioxide emission from fourdifferent crops at two different farms.

In Sweden live badgers are used in tests in order to train and prepare earth dogs for hunting underneath ground. This has for several years causeddebate concerning the welfare of the badgers. It is questioned whether the purpose of the dog training, i.e. to reduce injuries in both dogs and prey, is worth the suffering that is reflected on the badgers. The aim of this investigation was to study 1) stress levels in badgers when used in earth dog training, 2) if the stress load differs when the badgers are exposed to dogs with varying aggression levels (low, moderate, high).

The complex sound of someone walking in snow aren't easy to create in a studio. The best way to get the sound is to go out on a surface with real snow and record the footsteps there, but it is a complex procedure to get the right sound on the snow because snow sounds different in various Temperature and various kinds of snow. It is important to find the right kind of snow to get the right sound on the foot steps. In a studio, the foley artist can create the sound of footsteps in snow by walking on different kind of material, like potato flour, coarse salt or corn flakes, the question is how realistic this materials sounds and what Temperature on the snow they sound like. The results shows that the real snow (warm and cold snow) sounds most realistic and the potato flour sounds like warm and wet snow, the corn flakes some think sounds like cold snowwhile others think that it doesn't sound like snow at all and the coarse salt sounds like snow when it is around -10°C in the air, they all sounds similar in realism compared to each other.

At the beginning of 2011, Sweden started using the European rules for structural design, the Eurocodes, instead of the previous national rules. In both the previous rules and the Eurocodes, it is possible to dimension concrete columns using tabled values. However, the required cross section measurements have increased considerably. Moreover, it is possible to dimension concrete columns using calculations, however, this is unusual.The development of a fire in a fire cell can be divided into the growth stage, the fully developed fire and the cooling phase. The duration of each phase, as well as the Temperature, is dependent on a number of factors, e.g.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

The market for heavy duty engines is constantly requiring engines that should be more andmore powerful, while still maintaining low fuel consumption. As a result of increasing enginepower, the engine and coolant Temperature increases as well due to insufficient coolingperformance (because of design issues, cost etc.).Also, emission legislations, both current and future, require more and more measures to betaken by engine manufacturers. One way of meeting the legislations is the use of cooled EGR(Exhaust Gas Recirculation), which also lead to increased coolant Temperatures.Both these factors also naturally lead to increased engine oil Temperatures, the consequencesof which are not thoroughly investigated.This thesis project aims to investigate effects of high Temperatures on engine oil degradation,with focus on the greatest degradation process: oxidation. To do this several engine runs havebeen performed on a 310 hp engine with EGR to see what happens to the engine oil in a realengine when exposed to high Temperatures. During the tests oil samples have been taken andanalysed for important parameters.As a complement to these engine tests some laboratory oxidation testing have also beenperformed, to be able to compare engine test data with laboratory tests.One goal of the project was to try to formulate an empirical oxidation model, which would beable to predict oil oxidation levels in an engine, given any running parameters.

The horse is a homeothermic animal and to keep a constant body Temperature in winter season is important. Acclimatisation is to provide means for a good thermal insulation consisting of skin, hair, and an outer air layer. The skin covers the horses body and it is composed of three main layers where the top layer of the epidermis consists of dead keratinized cells that are constantly being sheed. The dermis is composed of collagen connective tissue that give the skin its strength. The bottom layer with subcutaneous fat provides a thermal insulation and can be used as an energy reserve in cold weather.

The purpose of this thesis has been todesign an electric circuit that measuresTemperature in three different ways. Asoftware was also designed to record andanalyse the measurments. The result of thecircuit was a PCB with inputs for 42sensors of both surface and non-surfacemeasurments. These all have a maximumerror of ±3°C..

Fortum has in a pilot project installed metering equipment with wireless communication in secondary substations in Stockholm. So far, the collected data are used only in specific projects.This master thesis was carried out at Fortum Distribution AB in Stockholm during 2013. The purpose of this study is to simplify and enhance the use of data in for example network planning process, by giving suggestions on how data can be managed and giving examples of analyzes that collected data can be used for.The electricity meter which Fortum has installed is a EDMI-Mk10A which is set to measure max/average/min values with a one hour time resolution of the following parameters: voltage (per phase), current (per phase) andactive power and active and reactive energy.In order to analyze the collected data an analysis tool is required. During this thesis two customized tools in Microsoft Excel have been developed, one for sorting data and one for analyzing.One aim of the thesis is to show examples of what collected measurement data can be used for. This work shows an example of analysis of active power, power factor, voltage, occurrence of interrupts and the relationship between outdoor Temperature and power.This master thesis has among others resulted in the following advice: Expand the number of secondary substations with measuring equipment.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.