There is two dairy farms in Sweden with ability to be opened on both long sides, one outside Hjo and the other one, Brandstadholm, north of Sjöbo. When there is no measures and results or not enough literature about natural ventilation and especially on this kind of air inlet, makes my tests very interesting not only on Alnarp, but among other companies. I would like to find out if there is any air movements direct on the cows, how high/low temperature, air humidity, light intensity and noise standard inside the barn. Does Brandstadholm fulfil the rules and regulations when it comes to climate inside the barn? Could this system become the new dairy barn instead of the conventional barns in Sweden? I am going to focus on the animals environment, after all they are the one who is going to spend the most of the time in the barn. I used five electrical loggers distributed inside the barn to measure the temperature and one of the loggers measured the air humidity, every 15th minute. One logger were placed on the outside which measured both temperature and air humidity.

The aim of this project was to quantify the total sleep time in modern dairy cows during24-hour periods and to investigate whether the total amount of sleep as well as timespent in different sleep stages varies between the dry period, early- and peak lactation.The distribution of sleep time between night and day was also examined. Furthermore,correlations between sleep and lying time, fluctuations in body temperature and heartbeat were included in the aim. Eight dairy cows of the Swedish Red breed were used inthis study, which was carried out between June and September 2010. In order toquantify sleep non-invasive electrophysiological recordings were performed.Simultaneously with collecting sleep data, body position and body temperature werealso recorded. No heart rate data was obtained due to difficulties of maintainingelectrodes for heart beat measurements attached to the skin.

The objective of the essay was to identify the nursing care required by a dog suffering from heat stroke and how to educate and advice the owners how to start treating their dog and prevent the condition from occurring in the first place. The essay is based on a literature study. Several databases were searched for scientific research to try find answers to the issues. Keywords concerning the subject were used and mixed in different combinations to sort out the suitable studies. The results of the study indicate that the dog should be cooled by the owner directly after detection. The most crucial issue is to reduce the body temperature as quickly as possible or the morbidity will worsen.

Utgångspunkten för denna kandidatuppsats är att den byggda miljön påverkar våra liv och vårt handlingsutrymme. Den byggda miljön kan möjliggöra eller begränsa olika typer av aktiviteter. Leken är en av de mest grundläggande aktiviteterna i vår sociala utveckling och är en del av den sociala interaktionen med andra människor. Leken förknippas ofta med barn, men leken förkommer och är viktig för alla ålderskategorier. Syftet med studien är att ta reda på hur den byggda miljön kan skapa möjligheter för leken att etableras. Vi undersöker om man kan planera och styra leken och vad leken kan tillföra i ett miljonprogramsområde. Många av de miljonprogramsområden som byggdes i Sverige under 1960- och 70-talet är ofta problemtyngda och den byggda miljön lider av ett eftersatt underhåll.

Helsingborg has the intention to build a train tunnel south of Knutpunkten. This report investigates the hydro geological aspects of the project. Questions at issue that will be answered: 1. Which parameters affect the groundwater level? 2. How will these parameters change within 100 years considering climate changes and what will be the consequences on the groundwater level. According to SMHI climate analysis the climate can change causing increasing precipitation, temperature, and a rising sea level.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

When grains of wheat and rye are conventionally milled, large quantities of bran classified as by-products are left and are mainly used for animal feed. Bran is a complex material composed of the aleurone layer, nucellar epidermis, a seed coat, a fruit coat and a small proportion of the germ and endosperm depending on extraction rate. The bran fraction consists of approximately 40-50 % dietary fibre which can contribute to increase the nutritional quality of human cereal food. It would also be valuable for the food industry to convert by-products as bran to products with higher commercial values. The aim of this thesis was to analyse the content and composition of dietary fibre of heat treated wheat and rye bran according to the Uppsala method with some modifications in order to analyse soluble and insoluble dietary fibre separately. Half of the bran samples were precooked, dried and roasted and the other half dried and roasted (uncooked).

This is a literature review of how the climate change affects the forest growth innorthern Sweden. The temperature will rise about 5 °C with the largest increase in thewinter season (December - February) and the CO2level in the atmosphere is expected tobe doubled. Precipitation patterns will change and increase with 25-35 % and theprecipitation will be in form of rain rather than snow. Today the forests in northernSweden are entirely dominated by coniferous stands. This may shift with the climatechange and results in a larger number of deciduous trees, preferably birch will becomestronger and grow better and faster.

In this report the balconies? abutments for a property in Bo01-area in Malmö has been studied. The property which is called Vitruvius contains four build-ings where two of them have corbelling balconies with intermittent abutments. With intermittent abutment means that the 50 mm thermal bridge insulation that the balconies is equipped with, is broken regularly by a 300 mm concrete heel. The reinforcement bar that holds the balcony runs through this heel.

People in today?s society are becoming more and more aware of how important it is to use energy as efficiently as possible. This is clearly noticeable by an increase in home produced heat with e.g. solar panels or heat pumps heating systems. These changing customer demands forces district heating technology to be redesigned, which is why there is an ongoing research regarding the next generation of district heating - low temperature district heating (LTDH).

As a part of the fight against the global warming the energy production needs to be more efficient and redirected towards sustainable options. One alternative is cogeneration, which means that electricity and heat is produced in one plant. The purpose with this survey is to examine if there are any commercial available combined heat and power techniques, based on combustion of solid moist biomass, which are suitable to small-scale applications. The technique must be able to produce between 2 and 10 MW thermal and the heat demand is a Swedish district-heating system. When already published reports had been studied, the Organic Rankine Cycle (ORC) was chosen as the most suitable technique.

This report treats whether it is viable to invest in solar heating to heat the therapy pool at Östersunds Rehabcentrum. The rehab center is owned by the county council of Jämtland and is located on Solliden in Östersund city. The solar heating where supposed to be a complement to the district heating that was heating the pool in the current situation. Later, it however showed that this was not the case. The pool is currently being heated by a radiator circuit that is being heated by the district heating.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

The report comprises two separate parts:part 1:  Temperature needs for district heating in the paint shop for axles in building 210part 2:  Energy and low temperature waste heat solutions in heating and cooling systems for   building 64 with surroundingsThe paint shop for axles in part 1 has air quality requirements in places for coating of axles. Toachieve desired air properties there are different process ventilation systems, which consist ofventilation coils for heating and cooling, plus air humidifier. The ventilations coils for heating usedistrict heating. Today the ventilation coils use water of 100°C to achieve necessary air demands inthe coating boxes. This part of the report investigates whether the existing system would achievethe air requirements with a water temperature of 75°C instead of 100°C in the ventilation coilsduring the coldest parts of the year.

In the process of making carton boards into Skoghall Mill, are great quantities of water being contaminated. This water has to be treated before it is possible to release into the recipient, Kattfjorden. One of the contaminations that is important to extract from the wastewater, is organic carbon (measured as TOC-total organic carbon) because microbiological breakdown can lead to the bottom becomig free of oxygen.The wastewater treatment at Skoghall Mill is done through an external wastewater treatment that is located at the factory. The biological treatment (aerated lagoon) is a 140 000 m3 water pool with surface aerator, which is give oxygen to the water. In the lagoon live microorganisms who performs the biggest part of the TOC-reduction.One problem with the lagoon is that the treatment of TOC is considerably worse during wintertime than during summertime.