The aim of this study is to evaluate whether the value of occupant load is over or under estimated when the Swedish general value for department stores, 0,5 person/m2, is used for dimensioning shopping centers. The data that was analyzed derives from seven shopping centers and one department store. A conservative method was used to calculate the occupant load factor. The analysis shows that two groups can be discerned: one group that is characterized by a lower occupant load factor that does not exceed 0,3 person/m2, and one group with a higher occupant load factor. Shopping centers with a higher occupant load factor are located centrally in large urban areas.

The purpose of this report is to study the risk of dust explosions at the candy manufacturing plant Leaf Sverige in Gävle, Sweden. The risk analysis was conducted with a preliminary hazard analysis, PHA and event trees. The analysis focuses only on the risk posed to employees and material damages at the plant. No third person injuries have been considered. Another purpose of this report is to study risk awareness and risk communication concerning dust explosions.

This report is a specialization in Software defined networking. SDN really comes to revolutionize the industry and it?s under constant development. But is the technology ready to be launched into operation yet? The report would initially involve a number of problems that today's network technology is facing.

För att kunna bli pilot i kommersiell luftfart är första steget att utbilda sig. En pilotutbildning måste föregås av en medicinsk undersökning för att garantera en tillräckligt god fysisk hälsa hos den blivande piloten. Många utbildare kräver också att en person som vill utbilda sig till pilot genomgår en psykologisk lämplighetsprövning, i syfte att få en indikation på dennes personliga förutsättningar i övrigt för en lyckad utbildning och karriär inom pilotyrket. När utbildningen är genomförd är piloten redo för att se sig om efter arbete men den senaste tidens allmänna nedgång i flygbranschen har gjort det allt svårare för piloter att få anställning. Detta arbete har syftat till att ge en inblick i bakgrunden till den typ av lämplighetsprövning som genomförs inför utbildning, hur sådana prövningar värderas av arbetsgivare i branschen samt vad som i övrigt enligt arbetsgivare avgör om en pilot är aktuell för anställning..

This essay takes its starting point in the research on digital technology and theories on learning to apply the research on history teaching. The theories on learning from Illeris and Selander are used to find out how the digital technology should be used in upper secondary school, since there is no extensive research on how the new technology should be used in upper secondary school. From that point the essay?s primary goal is to investigate how teachers use digital technology, if they choose a particular study field while working with the technology. Furthermore it investigates whether or not the technology is an appropriate mode of operation when developing abilities such as historical consciousness and historical empathy.

This master thesis has been performed at the department of Machine Design at KTH, The Royal Institute of Technology. The thesis has been a part of a global development project in collaboration with Luleå University of Technology, Lund Faculty of Engineering and Stanford University. Corporate liaison and sponsor has been Immerse Global Inc. The project was also performed on sponsorship from the Product Innovation Engineering Program, PIEp. The thesis is a representation of some of the contributions made by the authors.The lack of clean drinking water is one of the key issues facing the world today.

Abstract The purpose of writing this thesis was to improve methods during requirements engineering phase. Usercentred system engineering has some problem areas, which are examined and verified to create a new guideline for developers. This guideline tends to make requirements engineering more effective and help developers create more concrete requirements. It is not uncommon that system development projects ends up with unsatisfied users or delay in deliveries. The reasons are different kinds of communication problems between users and developers during verification of requirements. There is a therapy model, called solution-focused therapy, used in family and individual therapy. The model focuses on solutions for the future instead of problems in the past.

This thesis has been carried out in collaboration with the IT Company MPQ consulting AB in Halmstad. The task we were assigned by MPQ concerned the development of a scooter that can be used year round. We have with the companydeveloped the criteria and requirements for the product in which the goal is toproduce a primary solution that meets the set criteria and fall within the project'sboundaries.The project involves a wide range of different design methods for idea generationand idea development. The project also addresses engineering methods such asprinciple and primary engineering. Occurringmethods in the project include FredyOlsson principle and primary engineering in cooperation with SVID's - Swedishindustrial design process, etc.The final solution will be presented in the form of sketches, CAD models withassociated drawings and a rendering from the program Keyshot..

The aim of this report is to investigate, on the basis of two consult agencies perspectives, what the possibilities and obstacles are to integrate the work with antagonistic and accident related risks. The report is based on two consult agencies where each agency´s work procedure is represented by a risk management method. The work with accident related and antagonistic risks is analysed and evaluated compared to four different components. The components are risk management process (IEC´s and FEMA´s model), driving forces, education and competence, and resources to control risk management with COSO?´s ERM framework.

Examensarbetets frågeställning berör användarnas medverkan i Requirements Engineering (RE). Under RE-fasen skall samtliga krav på det kommande systemet tas fram från intressenterna. En viktig intressentgrupp i kravutvinningsarbetet är de kommande användarna av systemet. Resultatet av RE-fasen är en viktig faktor som påverkar hela den fortsatta utvecklingsprocessen samt hur lyckat det slutliga systemet blir.Detta examensarbete innebär en undersökning av vad användarrepresentanterna anser om use case-modelleringen i RE-processen. Undersökningen har påvisat att användarrepresentanterna är positiva till use case-modellering som arbetsmetod för att kartlägga kraven.

This thesis engages the topic of test methods for wood adhesives. Two test methods were evaluated, EN 302-1, a European standard, and ASTM D905, an American standard. The total amount of specimens manufactured and tested was more than 500. The adhesive bonds were tested in shear with an increasing load on the specimen until failure.The adhesives used were epoxy-resin, phenol-resorcinol-formaldehyde and a 2-K polyurethane. The test programme included five different types of intentional errors per method, in order to investigate the sensitivity of the test methods.

Title:Chillchain for cut flowers ? how the distribution works.Author:Anna-Maja Svarén, student at Lund Institute of Technology, mechanical engineering.Supervisors:Annika Olsson, Department of Design Sciences.Bengt Sahlberg, Bioett AB.Problem:How does the distribution of cut flower works regarding temperature, losses, responsibility, complaints, packaging and weak points?Purpose:The purpose is to map the distribution of cut flowers, with focus on losses in the temperature, from farm to store. The goal is to identify weak points in the chillchain and to se how wrong temperatures affect the flowers. The results can be a help to secure the chillchain.Method:The work started with a problem; map the distribution of cut flowers with focus on temperature losses. Data was collected on the basis of this problem, then analysed, and finally conclusions were drawn.Conclusions:The affect handling and distribution has on a cut flower is very complex.

This paper is partially a literature study of human error and interruptions and partially an investigation of pilots and Air Traffic Control. The aim of the investigation was to find out where interruptions occur and how to reduce or eliminate them. The objective of this paper was to investigate what type of interruptions pilots and ATC deals with and during which phases they occur. The paper has revealed that private pilots causes more interruptions for ATC personnel than commercial pilots. The cause for this is probably the less experienced private pilot and the fact that Swedish is used before English by private pilots in communication with ATC.

RISKfree ? ett system för riskhantering inom programvaruprojektI dagens IT-centrerade värld sker utvecklingen av hårdvara och programvara i en rasande takt. Om ett företag skall ha möjlighet att vara konkurrenskraftigt i denna utvecklingstakt, krävs det snabba och effektiva metoder i utvecklingsprocessen. Dessa krav från omvärlden på nya och mer komplexa produkter och tjänster innebär ofta nya och större risker för ett utvecklingsprojekt; både ekonomiska som tidsmässiga.Analyser av programvaruprojekt som har misslyckats visar att många av deras problem och risker kunde ha undvikits eller åtminstone drastiskt reducerats med hjälp av riskhantering. Oftast är det en optimistisk entusiasm över projektet som överskuggar viktiga varningssignaler om risker och problem enligt B.W.

The result from Requirements Engineering is a Requirements Specification. Characteristics of a good Requirements Specification are unambiguity, completeness, verifiability, consistency, modifiability, traceability, correctness and ranked for importance and/or stability.This work defines these quality attributes and answers the questions how to reach these attributes and the diffuculties which exist in this area.This work should be read to get an overwiew of the area Requirements Engineering and Requirements Specification..