The purpose of this study is to understand the factors that are affecting students at the Technology and Electricity- and energy programs in their choice of studies and vocation. The study is a comparative case study and quantitative method has been used in the form of questionnaires. The result shows that students do not like to be affected by another person but believes that they themselves have made their choice. Interest turns out to be the biggest influence factor of choice for both students at the Technology and Electricity- and energy program. For Electricity- and energy students have also access to work had some impact.The parents' education level was higher for Technician students and their parents worked with occupations requiring university degrees.

Virtual Design and Construction (VDC) is currently used more and more within construction design and planning as well as construction as a streamlining tool aiming to improve communication and decrease the number of construction defects. VDC is constantly developing, but what comes next? The augmented reality (AR) technology is currently not used within construction in Sweden but should be considered as the next step in line regarding the integration of reality and digital information. Using this technology design can become reality even before it?s actually built.The purpose of this study has been to carry out an inventory of the existing AR technology and its shortcomings, and also to identify possible applications within the construction phase.

With the increased significance of information technology (IT) in today?s society the term ?electronic democracy? (e-democracy) has gained much importance within the democracy theory. Naturally, there are several competing views on how the technology should be used for democratic purpose. One aspect of this is the somewhat revitalized claim for direct democracy in accordance with the hypothetical opportunity to finally realize it as a democratic system. The ideal of direct democracy combined with the almost total credence in the potential of technology constitute the idea of a ?push-button democracy?.

In hydropower plants it is necessary to always have local power supply. Therefore, the plants are equipped with batteries as stationary back up power. Vattenfall Vattenkraft is using lead acid batteries but has been investigating alternatives to replace them. The aim of this study is to investigate the potential of using Li-ion technology as back up power.The study showed that Li-ion batteries have many qualities. The Li-ion technology will decrease the space and maintenance demand.

Virtual Design and Construction (VDC) is the definition for using BIM in the construction process to simulate and analyse the building. Resulting use of the technology will according to proponents lead to fewer construction errors, a better understanding between stakeholders for the construction project, less communication problems and a smoother construction process. Although BIM has according to researchers a big potential, few companies have succeeded in broad and continues implementation. The study aims to identify the factors affecting the implementation. More precisely identify what factors influencing the decision to adopt VDC and potential barriers in the diffusion process. The empirical findings are based on a case study of NCC Construction Sweden.

This Master thesis has been carried out at Scania CV AB in Södertälje, in collaboration withKTH, The Royal Institute of Technology, Stockholm. The focus of this Master thesis isSetBased Concurrent Engineering(SBCE), with the purpose of answering the questions: what isSBCE, how does it work, and for what purposes is it applied.It was early established thatSBCE is often included as a part of Lean product development,which in its turn is often related to Toyota?s way of working. TheSBCE method includesworking with multiple solutions in parallel, eliminating weak alternatives throughout thewhole process. In opposite to a conventional product development process, where it iscommon one at an early stage tries to identify and choose the most promising alternative.Despite the appearance ofSBCE as a resource consuming method, figures from Toyotaindicates the opposite, thatSBCE is in fact a very effective way of working compared to othermore traditional methods.The process of this Master thesis was divided into three phases.

IT-användandet i byggbranschen har banat väg för nya, effektivare arbetssätt och det finns visioner om hur det ska fungera. Syftet med vårt examensarbete är att ta reda på byggbranschens användande av, och vision om BIM. Vad är BIM ? Building Information Model?Kort beskrivet är BIM en modell där all information för ett byggprojekts hela livscykel kan hanteras. BIM förenklar det fortlöpande arbetet genom hela byggprocessen genom att tillhandahålla information om projektet som är relevant, uppdaterad, integrerad, fullt koordinerad och av hög kvalité.

Övergången från CATIA V4 till CATIA V5 innebär nya möjligheter för konstruktörerna på Scania att arbeta med Knowledge Based Engineering, KBE, för att effektivisera och kvalitets-säkra sitt arbete. Då CATIA V5 är en ny plattform som innehåller verktyg med samlingsnamnet knowledgware, för att bygga in kunskap i modeller ville Scania undersöka potentialen i att arbeta med KBE, och hur detta skulle kunna ske på Scania. Vid traditionell produktutveckling tas en helt ny artikel fram vid behov och ofta innebär detta att arbete som tidigare utförts, görs om igen. Syftet med arbetet är därför att undersöka huruvida KBE i CATIA V5 kan erbjuda möjligheter att återanvända kunskap från tidigare arbete och samtidigt kvalitetssäkra denna, samt utreda vilka knowledgewarelicenser som i så fall kan vara lämpliga för Scania.För att göra detta har en litteraturstudie genomförts för att undersöka vad som har gjorts inom området, och även en intervjustudie har utförts inom R&D på Scania. Vidare har sakkunniga på Linköpings Universitet och Tekniska Högskolan i Jönköping intervjuats.

This essay is a study of the market strategies and situations in the telephone business. Our problem was to examine the telecom companies´ strategies to stay competitive and cope with the new VoIP technology. We chose to do a qualitative study and four telephone interviews were made with Swedish and Dutch companies. We investigated three different categories of companies in the market; industry leaders, cable companies and broadband companies to get a broad view of the market. The theory chapter is based on different strategies that companies have to or can apply to get ahead, stay or survive in a hypercompetition.

Denna rapport, En jämförande studie av Svenskt Vattens och CAC:s syn på HACCP-processen, En utvärdering och ett praktiskt tillämpande av Svenskt Vattens Handbok för egenkontrollprogram med HACCP, skriven av Anna Järvegren Meijer (handledd av Kenneth M. Persson, professor vid Teknisk Vattenresurslära, Lunds Tekniska Högskola och Anne Levin, konsult på SWECO VIAK, Malmö) behandlar kvalitetssystemet Hazard Analysis and Critical Control Points (HACCP) och fokus ligger på tillämpning inom beredning och distribution av dricksvatten.Rapporten består av tre delar. I den första redovisas HACCP-processen och de arbetssteg som Codex Alimentarius Commission har tagit som praxis. Här jämförs också Svenskt Vattens syn på HACCP i Handbok för egenkontrollprogram med HACCP med just CAC:s. Det konstateras att skillnader finns då Svenskt Vatten har valt att inte följa CAC:s praxis till punkt och pricka utan utformat arbetsgången annorlunda.Den andra delen av rapporten handlar om hur användarvänlig Svenskt Vattens handbok är i praktiken.

This study deals with integration between core subjects and character subjects on the upper secondary schools Electrical Engineering Programme. The purpose is to investigate how four teachers define subject integration, which the advantages and disadvantages are according to them and what the purpose is whit integrate the core subjects and the character subjects.The finding in this study highlighted that between themselves the teachers had different definitions of subject integration. In order to start up with a integrated working model the teachers had to come up whit a mutual definition of subject integration..

This thesis has been performed for the company System Andersson as a part of the bachelors degree in information technology at the School of Engineering in Jönköping. The thesis is based on the development of an iPhone application.System Andersson has an application for Android that is being used for their MPS system (material and production control system). Their customers, however, have also showed interest in being able to use this application for iPhone.The students handle the subject of iOS developing, including the design of the application, the use of the development language Objective-C, the use of the scripting language of Json used for server connections and SQL.The primary goal with this thesis has been to improve the students knowledge in such subjects as application development for mobile platforms, in such areas as Xcode, which is the development platform that Apple uses and Objective-C, which is the development language being used. The result of this thesis is an almost fully functional iOS application, similar to the Android application with some functionality missing..

Deponering är en metod som sedan länge använts för att behandla avfall. Metoden är dock kopplad till en rad miljöpåverkande faktorer, varav produktion av lakvatten är en. I lakvattnet finns bland annat lösta näringsämnen och metaller och dessa kan ge negativ påverkan på ekosystem om de sprids i miljön.Det här examensarbetet syftar till att besvara frågan om metaller i lakvatten kan retarderas genom att lakvattnet från en specialcell infiltreras i en biocell. För att besvara frågeställningen har mätvärden för ett antal kemiska parametrar analyserats på en deponeringsanläggning som ligger i Malmö och bedrivs av SYSAV.Arbetet avser även svara på frågan hur hårt biocellen kan belastas i fråga om hydraulik. Därför simuleras de förväntade uppehållstiderna av vatten i biocellen vid olika infiltrations-hastighet och porositet.För att ge resultaten tyngd har en litteraturstudie avseende deponering, hydrologi och hydraulik, lakvatten och metallers mobilitet i mark och vatten gjorts.Resultatet från litteraturstudien visar bland annat att lakvatten produceras genom att nederbörd perkolerar genom avfallet.

This candidate.?s work includes designing of a house with it.?s structural components andinstallations. The house had to be actual with Building Regulations (Boverkets Byggregler).Beside designing of all the crucial systems necessary for completing of claimed regulations evenan optional topic within building engineering had to be chosen.The task included designing of heating, ventilation, sanitation and electricity systems. Structuralengineering models has been made in compliance with Eurocodes. Materials for facades, floorsand roof were chosen and evaluated.As recessed portion of the work, evaluating of possibilities in designing of a glass roof waschosen.

This report is the result of a project work carried out at Karlstad University in conjunctionwith the local consulting firm Camatec where most of the work has been performed.The work can be classified as a classic engineering work with supportive theories andcalculations which in this context is relevant.The engineering project has focused on developing new standards for a conveyor that is usedin the Värmland paper industry where large rolls of paper are produced. A conveyor can takeits appearance in many different forms but in this thesis it has been an exemplary look and ithas also become modulatable with a central section, a drive end and a turning end.The construction work has been build under CAD programs such as Pro Engineer, drawingshave been created and costings have been analyzed. Strength calculations have been made andcooperation from several different companies have erected to explore different solutions andideas for a modern and sustainable conveyor..