The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

Certification systems, that assess companies? work with social and environmental issues, have emerged in an increasing number of industries. Today, there are environmental certifications for the food industry, the forestry, the fisheries sector and several more. In apparel industry, certification for sustainable working conditions has been of major impact. The property sector is no exception from other industries.

Husqvarna is a world leading producer of chainsaws with a well-established brand name. Husqvarna now has an interest in investigating the possibiltiy to expand their production of chains and guide bars to include cutting equipment for timber-harvesters.This project is a technical study which aims to answer questions about cutting equipment for timber-harvesters that have been decided in cooperation with Husqvarna. The questions have mainly been focused on forces, cutting speeds, service and maintenance -as well as general questions regarding the size of the Swedish market.Two methods have been applied to answer the questions. Interviews with retailers of harvesters, producers of harvester heads and harvester drivers.The main findings in this project show that there is a relatively small selection of harvester chains on the Swedish market. In contrast to the selection of harvester chains the selection of guide bars is quite large.

The retrospective part of this study evaluates the susceptibility patterns of bacteria isolated from blood in critically ill foals in Sweden. The most commonly obtained bacteria were Actinobacillus spp. (38 %) and Escherichia coli (27 %). Trimethoprim-sulphonamide (TMS) had good efficacy against most gram negative bacteria with the exception of Klebsiella spp. Among 17 Escherichia coli isolates 94 % were susceptible to trimethoprim-sulphonamide whereas all 24 isolates of Actinobacillus spp.

The use of information technology (IT) is exploding. Today, it is in our daily routines to use some kind of information technology. The increase of users increases the number of cyber crimes, ie, crimes that in some way involve IT. As the cyber crimes grow in numbers, the workload for technical investigator increases, these are called digital crime investigators. The thesis is about how police digital crime investigators work and what problems they may encounter during an investigation.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The aim of this thesis is to research if and in that case how, marketing of Swedish public libraries is used as a possible work method in a time when they are marked by changes in the form of cut backs and technical innovations. With a strive to get an overview by the possible debate I have chosen to do a closer exam of 20 texts published in five of the biggest Swedish library publications during a period of 20 years. My research is based mainly upon Philip Kotler?s marketing theories regarding non-profit organization as well as Eileen Elliot de Saéz interpretations of these to a library context. The first part of the essay therefore consists of an introduction of these, as well as a rendering of their method of work, which shows the width of the conception of marketing.

The aim of this thesis in Archival Science was to explore the concept of electronic archives and the challenges that might be encountered when attempting to move archives into a new digital age, as well as having a closer look at the term e-archive itself. Another aim was to explore how the OAIS reference model works in practice.To explore these questions I decided to do a case study on E-Arkiv Stockholm, a functioning e-archive. I decided to do a study on several documents that were created throughout the project, these included documents related to the planning of the archive, as well as the final report. My reason for this method was that these docu-ments came straight from reality and would give a clear and unbiased view of the project and it?s many aspects.Examination of the documents showed that the OAIS reference model and its concepts had been the foun-dation of much of the planning.

This Master Thesis has been carried out in cooperation with Ursus Medical AB (URSUS) which markets, assembles and sells the Rotex Screw Needle Biopsy Instrument ®. The instrument is delivered with an instrument holder. Customers had expressed dissatisfaction over that they needed to use two hands during a biopsy procedure, which resulted in a project to develop a new instrument holder.The project aim was to create concepts for how the new instrument holder should be designed, with focus on the mechanics. The new instrument holder would build on the existing basic principle that the screw needle and the cannula were screwed into the tissue. The thesis work would result in a technical solution and a functional prototype of the chosen concept.To achieve this, a generic product development processes were used and began with a comprehensive literature review.

Bipolar disorder is a severe, affective illness which causes a person to alternate between episodes of pathologically elevated mood (mania) and depression ? in between these episodes the mood is normal. The length and intervals between the episodes are highly variable among the ill, as are the severity which is divided into two major subgroups: bipolar I and II. Bipolar I disorder is the most severe because of the patient?s inability to realize that he or she is currently in a manic phase, in the case of bipolar II disorder, the patient is aware that he or she has an abnormally raised mood, a state which is called hypomanic state instead of manic.

This report presents an independent thesis corresponding 15hp and was carried out on Högskolan in Halmstad during the spring of 2014. The thesis is the final course which ends a three-year mechanical engineering program with focus on technical design.The thesis started in an operation which electricians are exposed to every day. The operation in question is cable laying or wiring. The tool they use is called a tension spring and is a long and stiff wire, usually made out of nylon or fiberglass. The tension spring is fed through pipes in the walls and brings the desired cables with it on the way back.

This report is a description of a developed educational simulator over rail vehicles and its components. The simulator is a hardware-based prototype over a door system on rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.

This essay analyzes the production process in connection with the original play Utopia 2012, which premiered at Backa Theatre, Gothenburg, Sweden on 27 October 2012.The aim of the essay is to seek a deeper understanding of this particular production process. No universal process plan was employed when creating Utopia 2012. Therefore, taking into account artistic, technical and administrative aspects of the work, a chronological process map has also been constructed in connection with this essay, in order to clarify each step of the theatrical working process.The theoretical approach is hermeneutic, and the material is based on interviews with key individuals with different professions and functions within the working process in order to gain multifaceted perspectives and results. The interviews took place at Backa Theatre with the exception of those held by telephone with the project?s two producers, both of whom by that time no longer worked at Backa Theatre.The findings of the essay mostly indicate that, with the significant exception of director Mattias Andersson?s artistic vision, no fixed process map nor explicitly articulated common goals were employed in this particular theatre production.

Title: ?The letters jump?- to struggle with decoding and still understand what you are reading.Author: Maria EkUniversity of UmeåDepartment of EducationSupervisor: Asbjörg WestumExaminer: Fredrik KarlssonKeywords: Poor readers, Structured text talks, Reading strategies, Reading comprehension, Commitment and Motivation.During the past decades, Swedish studies show that reading comprehension and skills in reading strategies have decreased. In secondary school for individuals with learning disabilities there has been a focus on care-taking rather than on comprehension in general, and on reading comprehension in particular.The purpose of this study was to investigate whether Reciprocal Teaching would increase reading comprehension and motivation among upper secondary school for individuals with learning disabilities. The study presents how three 17-year-old pupils and their teacher, discussed expository fact texts during twelve lessons using the reciprocal method combined with power point-presentations to get the students to read more actively with interferences and reflections. The ambition was to make the structured text talks as interesting as possible with texts easy to read, technical aids, structure to make the students feel security when reading and to get committed pupils with an increased interest in reading.The results show an increase in motivation in reading, and the students were more prone to take an active part in discussions..

The importance of good information security and safety grows larger and larger for each day in the information society of today. This concerns citizens, companies and public authorities. At the Swedish Transport Administration, the operation of an information security and safety process has evolved over the years to guarantee that the public authority can be trusted by its citizens, cooperating companies and other public authorities. This responsibility has been assigned to the Information Security and Safety Department (Informationssa?kerhetsavdelningen, ITsa?).In this thesis the aim is to review to what extent ITsa? achieves any business benefits for the Swedish Transport Administration, and to analyze, streamline and come up with solutions to improve their workflow.