This master thesis is an early concept development project about using plastic films and sheets as materials for shaping openings for Tetra Pak packages. It is also a technical introduction highlighting the areas of importance for the development of plastic film and sheets openings. The master thesis has been carried out as a co-operation between Chalmers University of Technology, KTH Royal Institute of Technology and Tetra Pak AB.The master thesis study presents an introduction that gives an understanding of the technical complexities and design possibilities of using thin plastic films and sheets in liquid carton openings. The knowledge is then transferred into five design concepts which points out the areas of opportunity. The technical introduction is widespread and extensive covering current packing trends, the liquid carton package and openings, thermoplastic material properties, and thin film and sheet manufacturing and shaping.

To get the maximal output of your exercise in gym machines, there are different factorsto be considered. For example the strength of the muscle varies dependent on the positionof the muscles. To get the best results of the exercise the load has to reduce and increaseat specific positions.This study was made in cooperation with Caretaker Scandinavia AB, a company forsales, marketing and development in health care. They are general agent for Nordic Gymwho works with manufacturing of equipment and machines for gym and fitness.The aim of this study was to generate a method of measurement to evaluate and controlthe biomechanics of Nordic Gym´s workout equipment. A protocol for an ergonomicanalysis on the equipment has also been elaborated.One of the methods to measure the biomechanics was to measure the torque through thewhole movement.

The purpose of this thesis is to examine how two separate museums have realised the task of digitizing their collections, as well as to learn what options, possibilities and resources have been available to them during this process. Additionally, the aim here is to find how the two museums have dealt with problems in connection to the digitization projects, since there are as-of-yet no established regulations or standards to guide them in their digitization efforts. However, national and international working groups seeking to establish better collaboration between archives, libraries and museums ALM institutions have recently begun to formulate recommendations and suggested standards. Some of these recommendations have been used here as a theoretical framework in the examination of the two museums. The research questions posed are: What options, possibilities and resources have been available to the museums in their digitization projects, in terms of economy, staff, Technical equipment and time?; For what purpose are the museums digitizing their collections?; and How does their purpose influence the process and chosen procedures? Also discussed here is how the museums relate to some of the existing recommendations.

MindMe is an aid for people with cognitive memory impairments. The aid is completely new and has beendeveloped within this bachelor thesis, no product of this nature could be found on the market before. Theidea came from Niclas Jarhäll, CEO of Mutual Benefits. Mutual Benefits were also partners in the project.The project was carried out by us in cooperation with Bachelor of Science in Innovation Engineeringstudents Malin Albertsson and Victoria Hedman at Halmstad university. The aid consists of a mobile phoneand a number of tags.

This Thesis in Military Technology deals with experiences drawn from the forced introduction of Weapons Station 01, 2009. The work aims to identify the experiences regarding the forced procurement of military equipment to see how they can develop normal and fast procurement of equipment. The main conclusions of  this work, is to achieve greater capability and increase the military utility, are: -          Common objectives and priorities of stakeholders-          Response and joint types shall determine requirements for system-          Ensure an integrated project team also at lower levels-          Engage the integrated logistic support early in the materiel process-          Include Armed Forces staff as early as possible in the testing and validation-          Prioritize work to facilitate the rapid development of decision on use (BOA)-          Provide back up for increased redundancy in the mission area .

The aim of this thesis is to study and analyze a village in the southern of Sweden called Gnosjö, which is famous for a special spirit of industrial success and entrepreneurship. Gnosjö has been successful and famous for many years but is now standing in front of several threats, like a growing number of out moving inhabitants, a low standard of education and difficulties for women to make carrier. Trying to reduce the threat of young inhabitants moving out, a new education program started three years ago with the purpose to make young students to be more interested in the technical development of the industry and make them stay in the district and hopefully be entrepreneurs.The research questions are; which consequences does ?Entekprogrammet? and the background of the students have on the students view on the spirit of Gnosjö, carrier in the local industries and wish of staying or moving from Gnosjö. Furthermore, I want to see if there are any differences between the girls and the boys, does sex have an influence on the view at the future? The study is made by qualitative and quantitative method.

Historically transformers with system earth equipment have been modeled as open circuits in zero sequence. This approximation has been satisfying, but lately it has been discovered that equipment on one side of the transformer have responded to faults that occurred at the other side. Most of these problems took place when the majority of the system on the secondary side of the transformer contained cables. These findings have led to questioning whether or not the former model of the transformer in zero sequence is correct. This report investigates if it is necessary to represent the transformer in zero sequence in another way than it is usually done today.

Animals can be ill and need veterinary care for many reasons. The conditions can be more or less emergent, some can even be life-threatening. When an animal is in a life-threatening condition you can save the animals life just by having the right equipment near-by and ready to be used. This literature-study help you, as an active working veterinary nurse, with which these conditions are that can show up in your emergency ward and what you should have near-by to give animals with acute life-threatening conditions the care they need. The author also looked at work tasks at the emergency ward and found out that in Sweden it is not defined who can and/or should execute them. Interviews were also done with nine of the largest small-animal hospitals in Sweden to compare the studies found with the Swedish emergency wards.

This thesis gives the reader an understanding for newsletters within e-commerce, and how to work with them as a channel for marketing. Furthermore it explains the technical and graphical demands, and how to ensure that the newsletter reaches the intended receivers.A successful newsletter can entice people to shop, but can also help to strengthen a brand and the relationship between the customer and the company. During the writing of the thesis, it has emerged that the most important part of a newsletter (which also determine whether or not the receiver reads the letter) are the subject heading, sender, layout, headlines,images and the deregistration link.A part from working with the different parts of the letter, the sender should also be aware of the technical and graphical demands. Since the E-mail clients are looking out forimages, fonts that are not embedded in the computer, and for questionable words there?s a big risk for ending up in a spam filter when not considering the demands.

This master thesis is made of two parts. The first part concerns the method and results ofdesigning a motion control system for a piece of research-equipment called BIRGIT. Theequipment is made to be used for research on eyemovements. In the second part, a computermodel of a part of the balance organ in the inner-ear is developed. The work has been done atthe Bernadotte laboratory at S:t Erik Eye Hospital.The equipment the control system is made for is a so-called rotationchair.

After the formation of the European Union internal market in 1992, member state specific obstacles and barriers were largely removed. This was especially the case in harmonised industries where standardisation and technical regulation have led to legal certainty. Despite this, a large range of trade regulation continues to remain distortional to trade, in addition to the ongoing tariffs and subsidies. The key trade regulations relate to a number of areas involving technical regulations such as production labelling and the protection of intellectual property rights. Whilst policy makers claim justification based around the need to correct market failure in delivering desired outcomes, the question is whether these regulations are appropriate responses to market failures or if they have simply been imposed in an attempt to protect domestic markets.

Detta examensarbete har utförts i samarbete med Svedala Compaction Equipment AB. Examensarbetets primära mål var att reducera höjden på ROPS tillhörande asfaltvält CC 422. En sänkning medför ett friare vägval och billigare transporter. Hittills har vägvalet påverkats av broar, viadukter och andra hinder. Med hjälp av riktlinjer från Svedala Compaction Equipment AB och Fredy Olssons modell för integrerad produktutveckling togs kriterier fram, vilka användes vid bedömning av olika lösningsförslag.

The measuring of logs is important in the sawmills process to the sawn products. The technology of automatic wood measurement is continuance developing. This study has the purpose to see how the different techniques and the routines works of measure frames for determining of wood value and sorting in sawmills. The study is performed as a literature study and a survey. The survey includes some of the Swedish sawmills that produce more than 10 000 cubic meters sawed products per year.

The subject of this bachelors degree project is an interior layout for road ambulances.Landstinget Västernorrland (LVN) wanted a layout concept that would be used to com- municate their design intentions to the ambulance producers during their purchase process.Designing ambulance interiors is an extremely complex process since there so many fac- tors to take into consideration. It ?s not just about taking the equipment and place it where there is space left in the cabin. You have to start with the user in focus and the tasks that are to be performed in the ambulance environment.It ishard to find design solutions that will fit 100% of the ambulance personnel?s working routines for 100% of the tasks.

This degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production equipment around the world.The project includes design and construction of equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.