The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The aim of this thesis in Archival Science was to explore the concept of electronic archives and the challenges that might be encountered when attempting to move archives into a new digital age, as well as having a closer look at the term e-archive itself. Another aim was to explore how the OAIS reference model works in practice.To explore these questions I decided to do a case study on E-Arkiv Stockholm, a functioning e-archive. I decided to do a study on several documents that were created throughout the project, these included documents related to the planning of the archive, as well as the final report. My reason for this method was that these docu-ments came straight from reality and would give a clear and unbiased view of the project and it?s many aspects.Examination of the documents showed that the OAIS reference model and its concepts had been the foun-dation of much of the planning.

This paper presents the result of a master thesis project at 30 Hp, master of industrial engineering at Luleå University of Technology. The project was performed during 20 weeks, spring 2014, in collaboration with ABB Control Products in Västerås. The aim of the project was to evaluate two half-automated assembly lines for a new generation of contactors, the NAFC assembly lines (New AF Conductor). The aim and purpose of the project was achieved by answering the following questions:? How are the ergonomic working conditions at the NAFC assembly lines during spring 2014?? Which areas at NAFC assembly lines can be improved for the work environment?? How can the ergonomic work conditions improve at the NAFC assembly lines?Literature reviews were performed from earlier research papers and articles of the ergonomic, musculoskeletal and work environment subject, from where a number of chosen methods and tools were used to perform the ergonomic evaluation.

Sweden has a long tradition of collecting documents by way of a process of legal deposit of copies. Its aim is to ensure the availability of material for research, cultural preservation and citizens? right to free information. New forms of publications, made possible by technical advances, are not accommodated in the traditional deposit submission criteria. Certain information accordingly risks being lost.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

GIS är inte längre en ny teknologi utan har funnits i snart fem decennier. Trots det har GIS inte hittat sin plats i den svenska gymnasieskolan, jämfört med t.ex. webb-design och andra datorteknikkurser som har funnits under en kortare tid. På den tekniska gymnasieutbildningen på Polhemsskolan i Gävle har GIS-utbildning bedrivits sedan 1999.De slutsatser som framkommer i rapporten är att en teknisk GIS-utbildning inte enbart är för elever på tekniska gymnasieutbildningar utan även för elever på andra gymnasieprogram eftersom de har samma förutsättningar att lära sig verktyget. Det konstateras även att det genom åren har funnits både nationella och internationella problem med att införa GIS-undervisning i gymnasieskolan.

This report presents an independent thesis corresponding 15hp and was carried out on Högskolan in Halmstad during the spring of 2014. The thesis is the final course which ends a three-year mechanical engineering program with focus on technical design.The thesis started in an operation which electricians are exposed to every day. The operation in question is cable laying or wiring. The tool they use is called a tension spring and is a long and stiff wire, usually made out of nylon or fiberglass. The tension spring is fed through pipes in the walls and brings the desired cables with it on the way back.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

This bachelor thesis aims to draw attention to sound in the heritage sector in Sweden. In particular, to thesoundscapes that can be identified in our cultural heritage environments. Sounds in an environment, here calledsoundscapes, affect our perception of the environment and how we remember it.To find out how the heritage sector uses and would be able to use sounds, I have firstly studied if audio recording iscomparable with the visual photographic image. I then present examples of sound documentation concerning theconservation of built environment. In addition, I have interviewed five key informants who all have a centralresponsibility for five cultural heritage environments.

The aim of this thesis is to explore how a bookstore chain and a public library meet the needs of their customers through environmental scanning. The empirical material is derived from six semi-structured interviews with six informants, three from each organization, together with an analysis of internal documents. The method used is a case study and the theoretical framework is based on models used in the process of environmental scanning, as described by Choo, Hamrefors and Hedin & Sandström among others, and which facilitate a comparison of the environmental scanning of the two organizations. The results of the study indicate that the library, as a public organization with a mission in society, perceives the environment as society as a whole and all its members as their users, whereas the bookstore concentrates on the sectors of the environment that affect their sales. The consequences of these different views are that the library is more active in the environment and uses surveys as a basic source of information, while the bookstore is more passive, and relies on statistics for information.

For a long period of time there have been discussions about the need to modernize, to keep up with the changes in our society. The schools as a result have to keep up and adapt in order for the education to be up-to-date. This includes the technological developments. Many steps have been taken and mighty sums have been invested in order to keep up the pace ? but are there any consequences from these kinds of investments? In this report I?m going to take a closer look on a recent addition to this phenomenon that were installed by means of a top-down approach and study the teachers and how they have adapted and view the change in their environment ? namely the newly installed interactive writing-boards.The questions I will study include how the teachers express their view about the installation of the interactive writing-boards.

Noise in schools can have negative effect on the teaching environment and speech perception. The national Child Environmental Health Surveys (BMHE) conducted in 2003 and 2011 studied how 12-year olds experience their sound environment in school. Results showed that the number of pupils that experience annoyance from noise increased from 2003 to 2011.Aim: The aim of this study was to study how 12-year olds perceive their sound environment in school.Methodology and material: A quantitative questionnaire survey was conducted in the sixth grade at two schools. The questionnaire used included questions from BMHE and self-produced questions. Sixtynine students answered the questionnaire.Results: Over 50 % of the respondents experience annoyance from noise in school several times a week.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.