The purpose of this study is to examine the usage of IT technology within preschool and study how IT tools are used by preschool staff for administrative as well as pedagogical assignments. Several aspects affects the work preschool staff do with IT which concerns availability to technology, how technology is used and how technology is made available for the children. There are a number of questions linked to these aspects where some examples this study examines are which advantages, disadvantages, obstacles or other limitations that comes with introducing IT? This study also examines how, when and in what contexts IT is being used? Other questions examined are the pedagogue?s general views of IT, competence development and eventual needs of investment? Further on this study examines to some part how children interact with IT during pedagogical activities? The overall objective is to shed light on problems that preschool staff encounter  in their daily work and on the basis of identifying important questions at issue that could constitute a basis for further research. The results of this study are based on both a literature review and a field study.

Vattenfall district Heating power plant in Uppsala produces district cooling with absorption heat pumps which leads to a large amount of waste heat that has to be cooled with evaporative cooling towers. The Environmental Court has ordered Vattenfall to survey the possibilities to recover the heat, which is the focus of this thesis.The study begins with an overview of the system, and conditions and limitations for waste heat recovery is examined. In the next step alternatives to recycle the heat is evaluated, either by direct recovering or by upgrading.First, the technical possibility of each alternative is discussed, and then the operation time and the amount of recovered heat is calculated. Those alternatives which are possible are brought further to an economic analysis.The cost of investment for each alternative constitutes the basis for a present value analysis. The results are put together in a table where the total amount of recovered heat is compared with the present value for the different alternatives.

During the past decade Information Technology (IT) and Information and Communication Technology (ICT) have become the main tools in teaching. Authors and early educators who are treated in the study talks about how technology has come to change the school's approach to teaching and didactic tools. The technology has also affected students´ and teachers´ ways to work because the technology's versatility makes demands on the user's expertise and competence. The technical skills have long been associated as a male domain, where men are expected to master the technology´s versatility. These expectations are not the same for women.

The work in project has been around since humans began to hunt in groups, building bridges or building of the Great Wall of China. In 1960- and 70´s, the word project got their value it has today. A project means a work done during a decided time, with decided economy and non-recurring nature (Jansson and Ljung 2004). The projects had a general analytical model. It was used for all projects the organization engaged.

This final-year project has been performed at Strix production Efterlyst. The task has been to make a page under their homepage, with a game application that?s supposed to be interesting and also have a strong connection to the TV- program. In the first part of the report, the reader will learn about the preparing work that was done before the work with the final game began. It is in these two test versions all the technical problems were tested, to finally be used or thrown away.

The main object of this diploma work thesis is about how computer programs can bea tool to use for work on stormwater investigations. The advantage of using acomputer program compared with calculations made by hand is evaluated anddiscussed. The computer programs that have been used for studies and a sequence oftesting of the possibilities are Autodesks Storm and Sanitary Analysis and DHIs MikeUrban.Focus on sustainable development now permeates the building industry. As a resultstormwater investigations have been conducted in an increasing extent the recentyears. Stormwater is water produced due to precipitation, such as rain and snowmelt.Stormwater investigations normally contain descriptions of existing land use, plannedland use and suggestions of measures and technical solutions for the future disposal ofstormwater.The initial part of the thesis consisted of literature studies on stormwater andstormwater investigations to understand the science.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

The purpose of this study is to examine the experiences and perceptions of children`s librarians regarding floating collections in public libraries in Gothenburg. In focus for the study are the experiences and perceptions that exist among children`s librarians when it comes to children as library users, the librarian`s working tasks and the professional role as a librarian. The empirical material has been collected through semistructured interviews with six children`s librarians. The material has been analyzed twice. The first analysis has been conducted through qualitative content analysis.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The water tower in Uppsala city forest was built in the late 1950's in what is now a nature reserve. The unique place was supposed to be visited by people, which is currently not the situation. This bachelor thesis aimed to perform an analysis and make a design proposal for the environment surrounding the water tower. The analysis was performed using the methodology previously described by architect Arne Branzell. The methodology focuses on how a space is perceived by a person moving through it.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The project has been done in cooperation with Schenker Åkeri AB in Sweden, Halmstad. Theproject is based on an inspection made by Arbetsmiljöverket, where they found minorshortcomings with distribution of goods for the employees. The project is an investigation ofthe drivers? working environment.Schenker Logistics is one of the world's leading providers of integrated logistics services.Schenker Åkeri AB is a subsidiary to Schenker Logistics and transports 2.4 million tons ofgoods yearly.The project started with a background study to evaluate drivers working environment. Wehave studied goods receptions, the working environment, strain injury and injury mechanisms.Methods used was observations, tests, questionnaire surveys and ergonomic andbiomechanical calculations.One result of the study is a working model, which gives recommendations for the maximumweight a driver should push and pull.

Today you can pay in many different ways. You can for instance use cash, credit cards, internet and now even with your mobile phone. Today we can also see new types of technical payment solutions being developed, such as Near Field Communication (NFC), mobile banking or through the use of QR-codes. We have today many different payment methods; therefore it?s interesting to see which payment method people prefer the most.