Grid codes are becoming more demanding on power generating units due to the factthat the complexity of the power grid is increasing. The penetration of wind powerhas grown over the last years and it is clear that wind farms need to be addressedwith the same type of grid codes as conventional generation units. There is howeveran undeniable difference between the technology in conventional synchronousgeneration units, and the asynchronous generation units in wind farms.This thesis has reviewed the current grid code in Sweden and compared it to the newcode proposed by ENTSO-E, ?the Requirements for Generators?, in the aspect ofwind farms with an installed power of 30 MW or more. The comparison has beencomplemented by an analysis of how wind farms of two different technologies(Doubly fed induction generators and full power converters) can meet therequirements and technical proposals have been given on how to be able to meetcompliance with the new grid codes.The Requirements for Generators contains many non-exhaustive and optionalrequirements, because of this it has been difficult to, at this stage, exactly point outthe technical impact on the grid connection of future wind farms in Sweden.

In recent years, the penetration of new players on the telecom market hasdrastically increased the work pace, affecting both design and production. Inthis report the technical and economical potential of a DC/DC converterplatform is investigated, in order to shorten the time of the design process.This is done in comparison with the present discrete type designs. PowerIntegrations offers a product, the DPA-Switch?, enabling this.By developing a wide DC/DC converter platform based on the DPA-Switch?,many advantages are gained. The component count is decreased by up to48 % and the yield increases by up to 2.9 % which in all yields a costreduction by up to 43 % or ?390 000 for 100 000 manufactured units.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

In recent years, the Swedish railway track system has been neglected in terms of capacity and maintenance. To adapt the existing system to current traffic load there is a great need for extensive improvement and maintenance. Shortcomings are especially occurring on older embankments running over soft subgrades. To select the most suitable method for reinforcement of the embankment, it is important to evaluate different solutions from a life cycle cost perspective. In long-term perspective, it is often shown that a method with low investment cost causes a higher maintenance cost and a shorter technical lifetime.

In this paper we have theoretically built a house designed for people with impaired mobility. Theessay begins with an introduction in which the purpose of the work, the methodology and thedepth-research part is presented. Then the layout that explains how we intend to adapt the housefor the demands detailed in the depth-research part is presented. In the same chapter variousstructural components, such as different floors and walls, are specified.In the selection of materials we have taken into account the criteria of our specialization andadaptation to the aesthetic aspects, where we evaluate materials based upon our wishes regardingtechnique and form. There are also other aspects that are important in the selection of materials,including that these are adapted to technical traits of the construction elements and installations.In a later chapter the technical installations such as ventilation systems, heating systems,electricity and sanitation are presented, where both technical and financial aspects are describedin detail.

The water tower in Uppsala city forest was built in the late 1950's in what is now a nature reserve. The unique place was supposed to be visited by people, which is currently not the situation. This bachelor thesis aimed to perform an analysis and make a design proposal for the environment surrounding the water tower. The analysis was performed using the methodology previously described by architect Arne Branzell. The methodology focuses on how a space is perceived by a person moving through it.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Westhelicopter INC. has an aviation workshop providing qualified helicopter maintenance in accordance with PART-145. Maintenance and administrative base is situated in Luleå at Kallax airport. The types that Westhelicopter INC are currently authorised to service are: Eurocopter AS 350 Base/Line Maintenance, Eurocopter EC 120 Base/Line Maintenance and Robinsson R44 Base/Line Maintenance. The thesis work has been to make new maintenance programme for Westhelicopter INC. This maintenance programme will be used to follow-up the time of the components, service bulletins and ADs.

This work covers a broad analysis of the risks that could impact the achievement of electrical safety of electrical installations. The work includes both electrical equipment such as the installation of electrical equipment.The report illustrates the main technical characteristics of electrical connections greater than 10 mm2 and provides an introduction to the crimping systems for copper and aluminum conductors. In addition to that analyzes the factors that are important to assure the quality of an electrical connection throughout the value stream in terms of both materials such informations. Furthermore analyzed deeper the need for skills development of technicians and other staff.The different parts of this work are analyzed and presented, in theory to studies carried out both at Elpress AB and partly with the help of other scientific reports dealing with similar subjects. In addition, presents a survey that will help understanding the current perception of the electrical connections and cable crimping systems among end users.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Computer programs must give a technical effect that goes beyond"normal physical interaction"to be considered to belong to a technical field. The invention shall be be susceptible of industrial application, which means that it should be possible to reproduce or use in any other industrial way. The reqirement that the invention shall be new means that the technique must not be previously known because of patents, published articles, etc. That an invention shall be a contribution to the state of the art in a technical field means that the invention shall not be obvious to invent for a person skilled in the art. Patents do effect the innovation among the inventers, but in most industries most inventions would be invented independent if there was a patent system or not.

The aim of this Masters thesis is to examine the accessibility in public libraries for persons with dyslexia and visually impaired persons. In order to do this, library services, information and attitudes have been studied. Data have been collected through interviews and studies of documents, in particular guidelines for library service to disabled persons. The theoretical starting point of the analysis is Professor Michael Bucklands different aspects of access to information. He discusses six types of barriers that must be overcome if access is to be achieved.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

As our society moves into a more technical era, journalism and the reporting of culture have had to follow. But where has that left the cultural critique, and journalist/reviewers, in our local newspapers? This bachelor thesis will try to map and explain the change of the cultural presentation in the local newspapers from the day it was firstly introduced as a genre in the modern journalistic world until today ? 1840 and onwards. Whether it has turned into complete tabloid journalism or if it's methods are used to expand the knowledge about the cultural object, it shall be discovered with the help of an analysis of the cultural sections in some newspapers ? both from the last quarter of 2012 (October - December) and one date from two years prior to that.

In several scientific and technical educations today we meet mathematical studies in differential- and integral calculus. The classic mechanics is a foundation for the physics and it has made it possible for today's technical developments that we in our everyday life meet and make use of. The intention for this essay is to give a picture of the person behind this discoveries that changed the science and the world. Besides the purpose to bring the reader on a journey through Isaac Newton's life the main intention is to give an understanding of the way he discovered the binomial theorem, the differential- and integral calculus, the numerical methods Newton-Raphson's and Newton's interpolation-polynomial, Newtons identities and his classification of third-degree curves and elliptic curves. A derivation of Kepler's first law is also included..