Our task was to create a virtual test bench for verifying memory addresses in our commissioning body?s models. The purpose with the testbench was that it should be created in such a way that it would be easy to change the device under test without any major changes in the testbench.To solve the problem that the testbench had to be able to verify different devices we had to create a general enviroment for how the testbench had to be composed. By doing an analysis of which com-ponents that are usually included in a testbench and which components that were necessary in our project we came up with a generall enviroment for the testbench. Our result was a testbench with the follwing basic functions:* Read from a file that contains read and write operations to the Device Under Test (DUT).* Apply the stimulus to the device* Read the results from the device* Compare the results with wanted values* Generate a log file which contains information about the simulation result..

Portable IT devices such as laptops, smart phones and computer tablets are becoming ever more ubiquitous. At the same time, the population of the Western world is growing older, with aging bringing about changes with regards to individuals' physical and mental capabilities. These facts raises important questions about how well suited these devices are for use by elderly people. This study focuses on the cognitive aspects of the devices' usability, using the concept of mental models to analyze the users' understanding of a computer tablet. It also draws upon theory of graphical user interfaces in its analyses.

Most companies and organizations today depend on technology connected to the Internet. Schools and offices have therefore been providing computers, phones and other technology to the employees. The recent technological development and decline in prices for technology have contributed to making these products a part of everyday life for most people. This has made it very common for employees and students to bring their own devices into school and workplaces.The aim of this study is to define what "Bring your own device" means for Swedish companies and organizations and how it has been implemented in those. The aim is not mainly to generalize to all Swedish companies but create an understanding how the trend is used to provide a basis for continued research in this area.

In this paper we have studied how young adults read news on the internet. The purpose was to seehow the consumers of news were irritated by the adverts on news sites depending on whichplatform they used, a computer or an portable reading device of the brand Apple iPad. Observationsand surveys were conducted on ten people. The news sites we used for this study were www.SvD.seand www.expressen.se. The result show that a majority experienced that their news consumptionwere irritated by advertising, mostly on Expressen's news site because it wasn't perceived asforeseeable..

The purpose with the examination is to examine a preschool head and three teachers experiences and opinions of whether the tablet can be used to support childrens linguistic development and social interactions in preschool. To answer the purpose we will use these questions of issue:What is the purpose with tablets and how are they used in preschool activity?What pros and cons do the teachers see with tablets?How do the teachers resonate about the use of tablets to develop childrens language skill and social interactions?What type of social interaction occurs when children use the tablet?We have used interviews and observations as our methods. We interviewed three teachers and one preschool head in the capital city of Sweden. They all have a positive attitude towards the use of tablets in preschool.

This thesis lays the foundation of the future routines of effective error repotring fortraffic devices in the raiway sector.If a device, for example a timetable display, stops working it is vital that the device isfixed as fast as possible so that the travelers dont miss any important information.The methods that are used today are old and not very effective. It can take time forthe repairmen to find the right device or locating the broken component. At the sametime he is supposed to maintain telephone contact with central control throughoutthe whole session.The need for a new, more effective, system is vital to make the whole repair pfocessmore effective and let the repairmen work without having to contact the centralcontrol by phone.I started this work by examining the possibilities of assigning every object with aunique identifier (ID tag) that could be accessed by a manual scan device. The ideawas that the ID tag could holw information about the object and be obtained byscanning the ID and get the information presented on a mobile device.The work also included building a internet application that enabled the reader to seeand change the information on the ID tag.The result was a database that stored information of different objects which could beobtained by scanning the ID tag and presented by a internet application..

There are many risk factors involved with a sedentary lifestyle. Deep vein thrombosis (blood clot), circulatory problems and contractures are just a selection of problems you can get by too little exercise. For people who are immobilized because of illness, it can be difficult to get enough exercise and movement to avoid similar complications. Because of most medical supplies on the market today are not optimal for use at home, I have chosen to develop a training device for the lower limbs, adapted for use in a bed, both in hospitals and at home. It is important that the devise can be used in any bed, regardless of headboards.

This thesis describes the developmentof a device called "Oil Separator"which is used for washing vehicles andparticularly car washing. The devicedeveloped for Mr. Car Bilvård AB inUppsala, the company's work involvespassenger transport and courierservices. The company needs anexternal device that meets theenvironmental standards to wash theirown cars in the premises without theneed to modify or reconstruct on thepremises ground as the premises is ona leased contract.Work began with a preliminary study onthe literatures that describes boththe function and structure ofdesigning the device. A few interviewswith other car wash companies had beenimplemented, and some measurements.After collection of the necessaryinformation the specifications ofcustomer requirement was presented .With these requirements a fewconcepts was generated and weighedusing the Pugh matrix for conceptsselection for further development.The final concept was furtherdeveloped and a design has beenpresented.

Allt större och större andel företag väljer att presentera och förmedla varor och tjänster via e-handel. En viktig aspekt vid e-handel är att kunden känner förtroende för e-handelsapplikationen och företaget. Denna rapport redogör för vilken inverkan multimediala inslag har för förtroendet av en e-handelsapplikation, vid initialt användande. En undersökning har genomförts med hjälp av en kooperativ utvärdering av fyra e-handelsapplikationer vilka innehåller olika typer av multimediala inslag har.Resultatet av undersökningen visar att multimediala inslag inverkar positivt på förtroendet för e-handelsapplikationer. Däremot finns indikationer på att för hög grad av multimedialt inslag inverkar negativt på förtroendet för e-handelsapplikationer..

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Sydved Energy AB. The aim of the work was to compare the operational productivity between two kinds of forwarders for extraction of harvesting residues, one forwarder with a special compression device and one ordinary, slightly modified forwarder. Two sites were studied for each forwarder. The study shows that the annual production was about 11,000 m3 higher for the traditional forwarder. The cost for the traditional forwarder was SEK 0.9 lower per m3.

This thesis is a part of the DySCAS (Dynamically Self-Configuring Automotive System)project which has the overall purpose of creating a middleware for the electronics in an automotive environment. The thesis has been made with collaboration with ENEA AB who is a member of the DySCAS project. ENEA AB has developed a demonstration platform to test the fundamental ideas which the DySCAS project is built on.The purpose of this thesis was to design and implement a GPS application to be added to the demonstration platform. This was done by adding a GPS receiver to the original DySCAS demonstration platform and designing and implementing an application to be able to extract the information from it. The resulting application is able to present cur- rent position and absolute time to the DySCAS networks as services to be used by other applications or by the network it self.

A new type of device for measuring thev m& ?rate of fuel sprays from a diesel fuel injector has been developed and the various steps in the development are described. The device works by deflecting all of the sprays from the injector at the same time by using a bell shaped deflector. A load cell consisting of a machined steel part with strain gauges mounted on it measures the resulting force. The shape of the curvature in the deflector bell shape has been evaluated by photographing the flow in a 2D?version of the curve shape.

The project contains a force analysis of the vertical axis wind turbine Lucia's supporting arms and a measuring device to experimentally measure the forces is made. The forces between the supporting arms and the tower are calculated theoretically and then simulated by a computere. A measuring devise is then designed to measure the forces experimentally. The forces acting on the attachment between the supporting arms and the tower is primarily the centripetal force, gravitational force and the aerodynamic forces on the rotor wings. The maximum forces were theoretically calculated and is 13.38 kN along the x-axis, -0.25 kN along the y-axis and then 0.5 kN along the z-axis.

Undersöknings syfte var att närmare ta reda på hur ett grafiskt gränssnitt för en och samma webbplats lämpligt kan anpassas för att ge en likvärdigt god användarupplevelse oberoende användaren använder sig av en vanlig dator eller en tablet.För att undersöka problemlösande designmönster prövades en teorisyntes baserad på befästa användbarhetsläror, så som metoder för visibility, affordance, mapping, begränsningar och feedback samt tekniker för grafisk gränssnittsdesign och navigation mot en fallstudie.Fallstudien utgjorde en del av ett större projekt, att ta fram ett koncept för en webbplats avseende ett arkitekturmagasin, att vara kompatibel med såväl en desktop som en tablet avseende möjligheten att med gott resultat ta del av samma tjänstekoncept oberoende plattform.Fallstudien gjordes i flera steg genom att först skapa ett passande tjänstekoncept avseende webbplatsens syfte, för att sedan i iterationer skapa ett interaktions- och ett grafiskt ramverk. Under produktionen togs framför all två saker i beaktande; inputmöjligheter både för desktop med mus och tablet med hand eller finger samt konceptuell modeller vad gällande navigation från både tablet och desktopbruk. Iterationerna avslutades med användartester där fyra personer fick prova de framkomna koncepten.Resultatet och analysen av fallstudien pekar på att det finns riktlinjer vilka en designer kan och eventuellt bör följa för att få ett lyckat resultat.Bland dessa riktlinjer är finkänsligheten gällande input den klara skillnaden mellan en desktop med en mus och en tablet med pekskärm. Därför bör alla interaktiva objekt alltid utformas och placeras så att de är lätta att aktivera oberoende metod för input.För ökad läsbarhet bör inte för liten text användas och dessutom tillkommer avvägning för navigation där det är viktigt att inte fastna i gamla webbdesignkonventioner med djupa hierarkier, utan i stället sträva mot en informationsarkitektur som möjliggör för enkel översikt och navigering.Analysen visar även på att överdådig grafik bör undvikas för att inte försätta användaren i en situation där den behöver fundera över hur den ska göra något snarare än vad..

The running of gas turbines with low emissions causes high pressure pulsations to arise in the combustion chamber. These pulsations are high amplitude sound vibrations. At some frequencies these are harmful to the gas turbine. Hence these pulsations are monitored to avoid operating conditions where pulsations are specifically harmful. It is necessary to expose the system of known pulsations to verify the functionality of the monitoring process.