When using the digital halftone proofing systems, a closer print match can be achieved compared to what earlier couldbe done with the analogue proofing systems. These proofing systems possibilities to produce accurate print match canas well lead to producing bad print matches as several print related parameters can be adjusted manually in the systemby the user. Therefore, more advanced knowledge in graphic arts technology is required by the user of the system.The prepress company Colorcraft AB wishes to control that their color proofs always have the right quality. This projectwas started with the purpose to find a quality control metod for Colorcraft´s digital halftone proofing system(Kodak Approval XP4).Using a software who supports spectral measuring combined with a spectrophotometer and a control bar, a qualitycontrol system was assembled. This system detects variations that lies out of the proofing system´s natural deviation.The prerequisite for this quality control system is that the tolerances are defined with consideration taken to the proofingsystems natural deviations.

Talented people are recognised as being the most important corporate resource over the next twenty years and a competitive compensation system is an important tool in attracting and retaining talent. Traditional pay systems are recognised as being neither cost effective nor motivating people to do more. Often these systems do not contribute to strategic objectives. This study outlines what constitutes an intelligent remuneration system that will enhance the mind value added by knowledge workers, reward knowledge creation, and contribute to organisational strategies..

In the United States, see recommendations for cardiac safety of sports arenas but also to health and fitness facilities. However, this does not exist in Sweden today. Objective: The purpose of this study is to identify the health- and fitness facilities today are equipped with respect to cardiac safety and specifically relating to preparedness for cardiac arrest. Method: Quantitative data are collected and compiled with the help of a questionnaire. The questionnaire contained 19 questions in total.

En prototyp till en förarstol för det militära fordonet SEP har tagits fram av tidigare anställda på BAE Systems Hägglunds AB i Örnsköldsvik. Stolen måste uppfylla en omfattande mängd krav då den är tänkt att användas i ett stridsfordon, och av personer av varierande storlek. Den nuvarande prototypen för stolen anses dock vara för dyr och det har dessutom framkommit en del klagomål på konstruktionen. Stolen måste därför göras om så den blir både billigare och bättre. Genom att ta del av tidigare genomförda tester på BAE Systems, samt genom att göra nya tester upptäcktes det dels vad som var dåligt och därmed behövde göras om, och dels vad som var bra och kunde tänkas behållas.

This thesis conducts a comparative study between two academiclibraries, one Swedish and one English, in order to analyse ifdifferent funding systems influence the marketing of theirservices. The theoretic foundation is built on relationshipmarketing, which emphasises the importance of creating andmaintaining relationships. A qualitative approach has been usedthrough the use of case studies, with semi-structured interviewsbeing held with library staff and managers in both countries. Inaddition to these interviews strategic plans have also beenanalysed. The result from the study shows that whilst there aresome differences between the two university libraries there arealso similarities, which indicates that it is not clear if differentfunding systems have an impact on the marketing of the services..

Nuclear power production carries potential risks both for the environment and for the work force. Different safety measures are employed and they stem from local rules as well as from regulatory authorities. This work describes the development of a safety promoting tool at Forsmark Power Plant, one of Sweden?s three Nuclear power plants. We describe the development of a computer based system for Pre-Job Briefing and Post-Job Debriefing.

Since January 2005 new rules have been introduced from the International Financial Reporting Standards for accounting of Business Combinations. Goodwill, which is the difference between the purchase price and the value of the net assets in an acquired firm, should no longer be amortized but should instead be treated as an object for yearly impairment tests. Nevertheless, there are many companies making the tests but not impairing goodwill. The theoretical frame of reference looks at goodwill from its two parts; true goodwill and false goodwill. False goodwill is defined as a measurement bias and constitutes a certain percentage of the operating net assets.

The purpose of the thesis is to compare Sweden's and Great Britain's total costs for their systems regulating producer responsibility for waste packages. Producer resonsibility is a strategy implying that producers are responsible for their waste also after its use. Sweden and Great Britain introduced different systems systems after an EU directive was adopted in 1994 (94/62/EC), and they have resulted in entirely different recycling levels in the two countries. In the Swedish system, responsibility has been delegated to the industry who are responsible for reaching the determined goals. The economic instrument used is a fee, set and managed by the industry. The British system is more centrilised, and the economic instrument used to finance recycling of waste is a system based on transferable permits. The thesis compares the four different alternatives: delegated and centralised methods, and fees and transferable permits analytically.

There are several energy systems in the Swedish society and to ensure the comfort and health of the citizens it is of importance that the different energy systems are functioning properly. District heating is one of these energy systems and many household depend only on district heating to warm up their homes. District heating is dependent on several processes where every step needs to function in order to deliver the produced heat to the end consumer. Previous studies have investigated the distribution of district heating and how to make customers choose district heating as their heating method. The supply of fuel to the district heating plant has not been studied as much, even though it is an important part of the whole system. This thesis is a part of the project NORD-STAR (Nordic Strategic Adaption Research), which has focused on climate adaption in the Nordic countries.

A persistent problem in the construction industry is its low margins of profit. It is often difficult to earn money due to low efficiency and high costs. Logistics on the construction site answers for a large amount of these costs and it is therefore of interest to find new, more efficient logistic solutions. The purpose of this thesis is to compare two different logistic systems and further to evaluate which one that is the most efficient and profitable. A comparison is made between the traditional logistic systems used for years and a new logistic system developed by an industry association called BEAst.

This thesis, drawing from several empirical investigations, reaches the conclusion that there seems to be a positive correlation between the level of democracy and the level of state capacity in Latin American countries. This correlation is explained by a hypothesis derived from Rational Choice theory. With some important caveats, this conclusion is then applied to the discussion about democracy as a form of government. Within democracy, the thesis also offers an insight into different electoral systems and its possible implications, mostly on a theoretical level. The thesis only exists in swedish as of yet..

This study includes several purposes which are to describe the concept of working environment, explain who is responsible for its functioning and how the working environment should look like. Other purposes the study have is to investigate how the working environment is in both Swedish and the two investigated companies construction sites and to share some operators proposing measures for the shortcomings and problems that exist in the construction sector working environment. To achieve these purposes was a qualitative study made with unstructured observations, interviews and survey where three construction sites were observed. The result shows that the concept of the working environment cover many aspects and is essentially about the environment we live in and experience in our work and this environment can be both an indoor as an outdoor environment. In this work, the concept is divided into four areas; it is the physical, the ergonomic, the psychosocial and the chemical.

Idag arbetar avdelningen för extern produktion vid BAE Systems Hägglunds med produktions stödjande uppgifter för leverantörer av Build-to-Print komponenter. En allt större del av BAE Systems produkter konstrueras av BAE Systems konstruktörer medan tillverkning genomförs av leverantörer. Denna förändring har skapat ett behov för BAE Systems att kunna stödja leverantörer i produktionsprocessen för att förhindra att kvalitetproblem uppstår. Den produktionsstödjande uppgiften blir också viktig då det finns en vilja på BAE Systems att kunna genomföra kvalitetssäkring hos leverantörer innan ankomst. Dagens arbetsprocess för produktionsstöd har vuxit efter olika leverantörers tillfälliga behov vilket har gjort att inget standardiserat arbets- eller kommunikationssätt finns.

INTRODUCTION: Attempted suicide is very common. Those who arrive to a hospital by reason of attempted suicide need a nurse with qualifications in the care of suicidal patients. OBJECTIVE: The aim of this study was to compile and elucidate research which describes how patients in care for their attempted suicide experience the care that is received. METHOD: A literature review was chosen for this study. Scientific articles sought in the database CINAHL.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.