This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

Traditionally the content of fiction has not been described, analyzed, classified and/or indexed to the same extent as non-fiction. As a consequence, this lack of content analysis has resulted in unsatisfactory fiction retrieval in relation to users seeking and search behaviour. This fact is why this Master s thesis is written. The total of library users' seeking and search behaviour is investigated in order to suggest methods to improve user adapted fiction retrieval tools. Suggesting relevant fiction retrieval tools corresponding to users' seeking/search behaviour is another aim of the study.

The aim of this study is to investigate which management control mechanisms evolve in companies that receive funding from Venture Capital companies and why the management control systems evolve in the way that they do. A case study was performed on three Swedish high technology companies, that all received funding from Venture Capital companies for the first time in 2006. Merchant?s framework, defining all management control mechanisms as either, results control, action control or personnel control, was used to structure the study. Results show that the companies that received Venture Capital all increased the use of management control mechanisms within results control, action control and personnel control.

We live in a stressful world and a demanding society where the ability to quickly adapt is one of the most important and most difficult challenges of today. A fairly new phenomenon called intranets has evolved to meet this challenge, however many examples of corporative intranets are stories about failures and systems with poor usability. This study focuses on how the user oriented approach to systems design affected upon a system development process of an Intranet, solely developed within a company, and how it impacts on the intranets popularity among the employees in the company. The study starts not from the literature but from a survey, which is based upon the Delphi method. Which results were used for further in-depth research about the subject, by interviewing three representatives from the company.

Title: Youth unemployment- A study of the tax effect on youth unemployment in 13 European industrial countries Seminary date: 2009-02-06 Course: NEK691 ? Bachelor thesis, 15 p Author: Emma Jonsson Tutor: Klas Fregert Keywords: Youth unemployment, tax, 13 European industrial countries, panel data, multiple regression analysis. Purpose: The purpose is to examine the reasons behind youth unemployment with a special focus on tax policy. Method: By using a multiple regression analysis examined with panel data from 13 European industrial countries for the period 1998 to 2004. The dependent variable youth unemployment is explained by five independent variables.

The world is changing and the business context is no exception. One of the clearest tendencies is a tougher business climate with harder competition due to increased international trade and the expansion of the e-business. At the same time the customers are becoming more sophisticated and demanding. The last decades have also meant that tougher and more frequent demands are being aimed at the businesses from a wider variety of stakeholders; demands regarding how environmental issues, social responsibilities and business ethics should be dealt with. All of the above have driven companies towards implementation of different management systems to be able to cope with the demands as well as to ensure that these issues are being dealt with in an efficient and effective manner.

This study aims to investigate how small scale manufacturing companies reason around an implementation of a PLM-system, as well as the suitability of these systems compared to larger companies. The study is built on a qualitative method. Initially, secondary data was gathered through books, articles and reports. Primary data was gathered through four interviews. Two interviews were performed with PLM resellers, one interview was performed with a PLM developer, and one interview was performed with a small scale manufacturing company that opted to not implement a PLM-system.The results imply that overall differences between larger and smaller companies exist in regard to the need of PLM systems.

Taiwan's recent democratization seem to have rallied a wider support of the notion of a national identity amongst its citizens which in the year 2000 led to the election of the pro-independence party DPP and President Chen Shui-bian. Meanwhile, China insists on the "one country, two systems" formula, regarding Taiwan as merely a Chinese province, and continues to fight any Taiwanese initiative towards sovereignty. Through a narrative perspective, this essay analyzes the self-conscious national identity-building quest embarked upon by DPP and President Chen Shui-bian. The analysis consists of three parts. Firstly, a text-analysis of President Chen Shui-bian's speeches is conducted to examine in what way he enforces and legitimizes the identity-building-process through narratives.

There are many barriers and obstacles that need to be removed to make the urban environment more accessible for people with disabilities. There are currently no adequate tools for urban planners to assess and address these obstacles. Geographical Information Systems (GIS) provide powerful methods for the visualization and analysis of spatial data, including the kind of data important in studies of accessibility. This study suggests a method urban planners can use to identify accessibility obstacles and to propose future actions to fix them.A literature review was conducted to find out what has been done and what is new regarding the accessibility issues. Different methods were evaluated which in turn led to the construction of a multi-step analytical strategy.

Today most ice rinks in Sweden use secondary refrigeration systems with a solution of calcium chloride and water as secondary refrigerant. Due to the large amount of energy such a system uses more efficient systems would be desired.An earlier study concluded in the possibilities of using carbon dioxide as secondary refrigerant with copper tubes as the loops in the ice rink. Since then 3 ice rink refrigeration systems has been built with carbon dioxide in copper tubes. Excluding the ones being direct involved in those projects there is still very little knowledge about how these system works. This study has been made primarily with the aim of adding to the knowledge concerning availability and cost and secondary to look at possibilities for improvement.A comparison between systems with carbon dioxide, calcium chloride respective ammonium solved in water has been made by using Decision Matrix.

This essay discusses the import of cod (Gadus morhua) in Sweden during the Middle Ages through isotope analysis of cod vertebrae. The isotope analysis is used to trace the cods origin to either the Baltic Sea or the Atlantic Ocean. The bones were subjected to d13C, d15N and d34S analysis; 64 of  the analyzed bones met the quality criteria. The isotop data showed that import of Atlantic cod was significant in medeval Sweden. The analysis suggests that there is no specific time or event that the sites start to import cod but this varies from site to site. .

The ÅF Group is a leader in technical consulting, with expertise founded on more than a century of experience. They offer highly qualified services and solutions for industrial processes, infrastructure projects and the development of products and IT systems. They are also one of the leading names in certified third-party testing and inspection work.Today the ÅF Group has approximately 4,000 employees. Their base is in Europe, but their business and clients are found all over the world.A part of ÅF-Engineerings business is programming different automation systems to clients. Another part is support in both telephone and personal visits.Because the number of clients is high and the flora of different automation systems is big the consequence is that the employees must have access to many licenses with programming tools.

The relatively poor economy in European dairy farming might be improved from efficient feeding systems and dietary management. Increasing herd sizes and transition to loose housing systems in Sweden, increases the possibilities for other feeding systems than separate feeding that is the traditional feeding system in Sweden. Other possible feeding systems are partial mixed ration (PMR) and total mixed ration (TMR), where the TMR system sometimes is associated with overfeeding and thereby increased environmental impact and high feed cost. Diets providing nutrients above or below animal requirements are considered as unbalanced, which in turn are associated with reductions in health, fertility and milk production. On the other hand, a balanced feed ration improves feed efficiency, nitrogen utilization and profitability.

District heating covers most of the residential areas and industries in the twoneighbouring Swedish municipalities Nyköping and Oxelösund. In Nyköping,Vattenfall AB Värme produces heat in a bio-fuelled CHP plant. In Oxelösund,waste heat and use of waste gases from the steel production at SSABOxelösund is the basis in the district heating system.This report examines the environmental consequences of a connection betweenthe two district heating systems. A broad system approach is used and the focusis on environmental effects in the system.A system analysis has been performed on the result of simulations of differentheat and electricity production alternatives. The alternatives simulated wereone where Vattenfall Nyköping covers the base load in the joint district heatingsystem and two where the power plant at SSAB Oxelösund supplies the heatbase load.The conclusion in this report is that the consequences of connecting the twodistrict heating systems can be both positive and negative, depending onsystem boundaries and on the environmental focus.