This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

The farming system is the basis of human existence through its production of provisions for man. By a continuous exchange of information, energy and material, between the ecosystems and the social systems, the farming system becomes an emergent property. The system's own properties, in the sense of farming methods, circulations and institutions, evolve through an adaptive process. Understanding this process and constantly learn from it, is the starting point for creating a sustainable development within farming systems. Thus, future farming system has to develop strategies that produce food provisions while at the same time takes into consideration the ecosystem's resilience and its integrity, but which also enables an ethical discussion. The institutions within the farming system are understood as links between the ecosystems and the social systems.

Drain water heat recovery is an uncommon measure in multi-unit residential buildings. There istechnology available for the purpose but the knowing and experience of the heat recovery systems islittle. The purpose of this thesis is to evaluate the future potential of drain water heat recovery inmulti-unit residential buildings.A major part of the multi-unit residential buildings in Sweden were built during modernismen andrekordåren (1940?1975). Many of the buildings have worn out drain and water supply systems andmany are in need of a general refurbishment.

Stump wood is a hot alternative when the heating plants demands more and more forest fuel. The aim with the study has bean to calculate the costs in four different systems for transportations of stump wood, examine if there are any differences in fuel quality for the stump wood in the different systems, analyse if the fuel quality in stump wood is affected with the time it lays by the road side and how much space the stump wood demands on the road side. To calculate the costs for the different systems a system analysis was carried out, where some of the costs were collected through field studies on Holmen Skog stump experiment and other costs were collected from literature and contacts. Data for the fuel quality study was collected from Eons heat plant in Norrköping. Data for the study of how much space stump wood takes along a roadside was collected from field studies.

Scandinavian Biogas is involved in the planning of a combined ethanol and biogas factory in Karlskoga, Sweden. Besides biogas and ethanol large amounts of digester residues will be produced, about 450 000 liquid tonnes residue (~7,3 % Dry Substance( DS)). The objective of this thesis was to investigate possible uses of the residue from the biogas production process ScandgasEthanol developed by Scandinavian Biogas, and to derive a methodological approach how to evaluate and compare handling systems. Three systems where proposed and compared in this thesis; spreading of the untreated residue as fertilizer (system 1), dewatering to a higher DS content to reduce transportation before spreading as fertilizer (system 2) and production of a solid fuel by dewatering and drying the residue (system 3). The general conditions for the proposed systems were investigated in terms of practical viability, economical aspects, environmental impact and energy inputs/outputs.

This thesis aims to investigate SAAB AB´s possibilities to use synthetic instruments in their test systems. The reason for this is reducing costs and the risk of obsolescence which is common when test systems operate for several decades.The market around synthetic instruments has been explored in the search for suitable hardware and software. Software has been developed in LabVIEW and synthetic instruments have been created with the help of IVI-drivers. The hardware consisted of PXI-instruments (Waveform generator and Digitizer), connected to a computer using a fiber optic link and PXI-chassi. The created instruments was then compared to common instruments used today, and the comparison turned out well.

Change is a natural state for both people and institutions, but as the surrounding world moves faster it becomes important to quickly be able to adjust to new conditions. Customers? force of negotiation increases as the global competition grows. One factor that becomes more vital to customers is the amount of quality standard a company can offer them. Several factors are essential if a work of change will be considered a successful investment, where the change can be perceived in both a positive and negative way for an employee.

ERP system is the information technology that has had the biggest impact in companies? development and way of working in today?s world. ERP system is divided in several applications with a modular software design that allow people in every department in a company to store and retrieve information accurately and in real-time. This master thesis investigates attitudes toward ERP systems among business organisations and ERP suppliers with the overall purpose of analysing to which extent a new ERP system will bring change in the business process. The purpose of this thesis is to make a survey of attitudes toward ERP systems among business organisations and ERP suppliers.

As an amateur it can be difficult filming from several angles at the same time as this requires several cameras. It´s also hard to film at occasions when it´s not appropriate to manoeuvre the camera manually. Systems for solving these problems already exist, but it´s either more expensive, professionalsystems or cheaper systems with limited functionality.The purpose of this project is to develop a cost efficient solution to the problem above that offers a better functionality then existing commercial systems. The biggest difference from existing products is the wireless video feedback from the camera to the remote unit.The result of the project is a system consisting of two units, a manoeuvre unit with a cradle for the video camera and a remote unit from which the operator can control pan and tilt of the video camera.Communication between the two units is wireless.On the remote unit there is a joystick and a display mounted. In addition to this, there is also an IR receiver that is capable of reading the signal from the cameras own remote and sending it to the manoeuvre unit.The manoeuvre unit is equipped with one motor to control the tilt function and one motor to control the pan.

Background and problem: Higher and other demands are made on management control systems in organizations which have a superior non-financial objective. Systembolaget, a state-owned company with monopoly to sell alcoholic beverages in Sweden, combines two main objectives which can be considered as conflicting, one financial target and one superior non-financial public welfare target. The research questions are focused on the translation of information through the organization?s levels and if the management control system makes it possible to run the organization according to both of the two main conflicting objectives.Purpose and Delimitations: To describe, analyze and evaluate how management control can be used in an organization, which is not profit maximizing and has both non-financial and financial objectives. The essay does not try to describe or draw generalized conclusions regarding general perspectives on Systembolaget?s assignment and objectives.Method: A qualitative and evaluative case study based on interviews with five employees at different levels in Systembolaget has been carried through.

This thesis analyses the problem of how to organise a multidisciplinary domain of knowledge like architecture. The study is both theoretical and empirical. The theoretical part include discussions of theories of knowledge organisation. Two different principles of classification were examined in relation to the domain itself, as well as in relation to the educational programme at the School of Architecture at Lund University and comparable schools in Sweden. The empirical part is a case study carried out at the School of Architecture at Lund University.

Problem: Our opinion is that it is important to consider about usability in system development. In this thesis we will focus on usability in point-of-sale systems. The point-of-sale system we base this thesis on is Extenda Retail. Our case study is performed on Ica Kvantum in Bromölla, which implemented Extenda Retail about two years ago. Purpose: The purpose of this thesis is to figure out what important factors there are to consider, in usability aspects, when developing point-of-sale systems, with focus on the cashier.

This essay deals with risk management and social risks, which have received increased attentionin recent years. Methods for dealing with social risks, for example within local Risk andvulnerability assessment (RSA), are currently under development. The purpose of this paper is toexamine if and how social risk can be quantitatively assessed and mapped using GeographicInformation Systems (GIS). The definition of social risk that the essay is based on states: "Theprobability of unwanted events, behaviors or conditions originating in the social conditions thathave a negative impact on the objects that are worth to preserve.? A number of social riskindicators that can be used for a spatial analysis have been operationalized based on thisdefinition.

This report describes the work process to an interactive movie addressed to children with neurodevelopmental disabilities, where Jippieserien is the client. The aim is to explore how multimodal media can convey Jippieseriens message to children with neurodevelopmental disabilities and their parents, by taking the users needs into account.It is important to focus on the people who will use the system when designing interactive systems. This project is therefore using the designprocess human-centered design for interactive systems. The process includes four basic elements and provides guidelines for user-centered design. These parts are analysis, prototyping, implementation, and evaluation (Johansson.

The report comprises two separate parts:part 1:  Temperature needs for district heating in the paint shop for axles in building 210part 2:  Energy and low temperature waste heat solutions in heating and cooling systems for   building 64 with surroundingsThe paint shop for axles in part 1 has air quality requirements in places for coating of axles. Toachieve desired air properties there are different process ventilation systems, which consist ofventilation coils for heating and cooling, plus air humidifier. The ventilations coils for heating usedistrict heating. Today the ventilation coils use water of 100°C to achieve necessary air demands inthe coating boxes. This part of the report investigates whether the existing system would achievethe air requirements with a water temperature of 75°C instead of 100°C in the ventilation coilsduring the coldest parts of the year.