The report is the result of a master thesis at ENEA AB during the fall of 2009. Itaims to create a specification of flash memory management system which focuseson power efficiency and low RAM usage for embedded systems, and to design andimplement a prototype of such a system to facilitate further development toward thecreated specification. The system used by ENEA today is a Flash Translation Layer(FTL). It has a complex structure which prohibits modifications and customization,therefore a new flash memory management system needs to be developed.The suggested solution uses a translation layer called Metadata FTL (MFTL), wherefile system metadata and userdata are separated from each other in order to improveperformance. The partition holding userdata uses a block-level mapped translationlayer system called Fully Associative Sector Translation FTL.

The housing sector uses 40 % of the energy in Sweden and half of the electricity usage. Theuse of energy is the main reason to the increasing rate of carbon dioxide in the atmosphere.This is the main motive but also a wish of higher safety, that is a higher rate of selfsufficientenergy production in Sweden, we want to decrease the need of using fossil fuel. Now whenthe energy price rise, the interest in energy issues increase and more people discuss thepossibility of reducing the usage of fossil fuel. A change to renewable energy such as sun,wind and water is the only solution where we can get a sustainable development.One way to contribute to a better use of energy is to build in the principle of passive house.The house is being built with a thick and tight insulation. If you use a heat-exchanger withhigh degree of efficiency and a final heating battery on the ventilation system, the heat fromlamps, devices and the ones living in the house should be enough to fulfil the criteria ofliving.

Title: Information storage - A growing problem? Authors: Göran Svanhall Pär Truedsson Erik Ponnert Tutor: Bengt Carlsson Problem: Every day companies, regardless of size, produces new information that needs to be stored. In the information society of today, the characteristics of the information changes both in size and complexity. This results in higher demands on which storage solution that suits the company and their field of business. New and more innovating storage solutions enters the market, but are they necessary to smaller companies of development active in the IT society? Questions to Answer: Is data storage a growing problem for companies of development active in the IT society? How do traditional storage solutions manage the information growth of today? How urgent is the need of a new storage solution? Which features are prioritized in the future storage solution? Method: By performing a quantitative survey we delivered an inquiry to several companies, which answers will help us answering our above mentioned questions.

The thesis aims to describe the current sales climate in the context of complex sales in business-to-business. The purpose is to increase the clients knowledge of sales and test the clients hypothesis that the sales climate is changing from Solution Selling to Insight Selling, further the thesis aims to contribute to the scientific debate of sales. Solution Selling is characterized, as the name suggest, by selling of solution to the customers needs. With Insight Selling the seller has a provocative approach towards the customer and the seller is searching for customers in the need of change. This is a qualitative study conducted with eight interviews and one focus group.

This degree project is on 15 university points which correspond to 10 weeks full time studies. The work has been carried out during autumn term 2007 and spring term 2008. This degree project has been carried out with the cooperation of Etac Supply Center AB who is located in Anderstorp.It?s been Etac interest to develop a solution which helps the user of the wheelchair over obstacles. My task has been to develop a concept that solves the problem according to the requirement specification.In the rapport the reader can follow the development from an idea to a finished concept.

Information stored on unprotected computers that gets lost or stolen, and falls intothe wrong hands, can easily be accessed by moving the hard disk to a controlledcomputer, or by booting the computer from a removable medium, in order to getaround the operating system login. This is something that largely affects companieswhere customer information, trade secrets and other sensitive information can becompromised. A classic solution to the problem is encryption of individual files, but ithas some drawbacks as it puts a great responsibility on the users and unencryptedinformation can be left by mistake. A better solution to the problem is transparentencryption of the entire hard disk, i.e. that encryption and decryption of informationis performed automatically and without the user being affected.

Electrolux Laundry Systems is the world leader in manufacturing professional laundry equipment.The machines are used in the hotel sector, elderly care, in multifamily houses, laundry bars, and incommercial and institutional laundries.If there is oil or grease left in the clothes after washing may the heat from the dryer cause a chemicalreaction. This reaction may, under certain circumstances cause a fire inside the drum. Competitors toElectrolux has developed its own systems that extinguishes fire inside a tumble dryer and customershave expressed desire to purchase a fire-extinguishing system. Therefore, the project team receivedthe task by Electrolux to develop a fire-extinguishing system that extinguishes a fire in a tumbledryer.The purpose of the project has been to develop a system that both detects and responds to fire in anindustrial tumble dryer to meet the competitors and to satisfy customers' requirements.The goal was to develop a fire-extinguishing system for Electrolux Laundry Systems and develop afully functioning prototype.The project began with information searches on a variety of methods to both detect and extinguish afire. Subsequently, a number of different methods were used to develop a final solution and make aprototype.The result of the project is a fire-extinguishing system that extinguishes a fire inside a dryer.

Travelling by train has increased during the last decades in Sweden. This has put pressure on the existing infrastructure and has created problems with delays and cancelled departures. The railway is a complex system with mutual dependencies and high vulnerability for disruptions. The situation for the railway system in the Stockholm region is today strained. The capacity is fully used.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

The company LightLift Esystems AB manufactures patented motorized lift systems for the illumination of halls with high ceilings. The company wants a new design for singular heavy lights in order to be more competitive.This project consists of the development of the new design under the requirements and specifications imposed by the company. The new design must support lights up to 300kg and keep the overall dimensions as low as possible without modifying the driving unit.This document contains all the designing steps followed to reach the final solution as well as the material selection, manufacturing process and assembly of all the parts that form it.The solution obtained shows to be very competitive with other alternative products, since this new design triples their maximum load capacity while the dimensions are very similar.In this context, the optical appearance was also very important to the company and so it was another main objective of this project. From an aesthetical point of view, the final solution proves to be very compact and versatile since it can either be hidden behind a false ceiling or covered by a plastic case that gives the design a very nice look.Finally, the solution achieved fulfils all the requirements and specification previously imposed. It is reliable, compact, cheap to manufacture, easy to assembly and it has a good optical appearance. .

Abstract (in English)During the last fifty years, the waste in an average Swedish household has increased by about five hundred percent. In order to manage (eller take care of) all of this new waste, Swedes need a method of facilitating the handling process. In this report, both the habits and needs among private households across Sweden are investigated, followed by a pertinent solution to the waste problem. This solution is a container with two compartments, using the standarddimensions of a grocery store paper bag..

This thesis consists of four case studies. The objective is to find out how to get a well functioning cow traffic in an automatic milking system. Different technical and building solutions are analysed and some adjustments are proposed for the DeLaval herd management software. Case study 1: Lactation chart comparison from traditional cow traffic and Feed First? cow traffic Case study 2: Farm A - a study of the precedence passage and the cow traffic Case study 3: Farm B ? an overview of the farm and their way of working Case study 4: Key factors ? how can we judge how well a VMS farm is working? Case study 1: Lactation chart comparison from traditional cow traffic and Feed First? cow traffic In this survey data is analysed from before and after rebuilding to Feed First? cow traffic. Lactation graphs are compared between traditional cow traffic and Feed First? cow traffic.

Title: Information storage - A growing problem? Authors: Göran Svanhall Pär Truedsson Erik Ponnert Tutor: Bengt Carlsson Problem: Every day companies, regardless of size, produces new information that needs to be stored. In the information society of today, the characteristics of the information changes both in size and complexity. This results in higher demands on which storage solution that suits the company and their field of business. New and more innovating storage solutions enters the market, but are they necessary to smaller companies of development active in the IT society? Questions to Answer: Is data storage a growing problem for companies of development active in the IT society? How do traditional storage solutions manage the information growth of today? How urgent is the need of a new storage solution? Which features are prioritized in the future storage solution? Method: By performing a quantitative survey we delivered an inquiry to several companies, which answers will help us answering our above mentioned questions. Conclusion: The consulted companies experience no growing problems what so ever regarding their existing storage solution..

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

AbstractThe Swedish Road Administration in the region of Mälardalen has since 2004 worked to in¬crease the efficiency of the maintance of bridges based on limited functional requirements and time demanded action.The maintenance of the bridges is contracted in the county of Uppsala since 2004, and Örebro since 2007. The county of Nyköping and Västerås is contracted by the traditional system. The contractor will perform a regular maintenance on all bridges. The bridges are inspected by the contractor at least once every year.The contractor registers the result of the inspection in a database called BaTMan. BaTMan is a Bridge and Tunnel Management system and is a strictly web solution were the user logs in via the internet.The Swedish Road Administration also inspects the bridges to se that the demands on the bridges are followed.My work is to compare these different inspections and to see any development..