The data acquisition system COMET developed by Saab AB contains a unit for signal conditioning and A/D conversion, called KSM. The varieties in signal conditioning constitutes of a number of specific PBAs and maintenance as well as reconfiguration of these are complicated not to mention costly. This thesis has aimed to investigating whether the signal conditioning circuits can be replaced by a general purpose, programmable solution. If so, how can this be done? The development has been carried out by evaluating ideas through the use of a laboratory environment and has resulted in an analog design for laboratory purpose.

This piece of work develops a solution that automates protection against software keystroke loggers. Keystroke loggers can be used illegally to register a user's keystrokes and in that way acquire sensitive information. The solution was tested on two different networks and the efficiency was measured. The network represents an enterprise network that uses the operating system Windows along with the directory service Active Directory. A script was developed to solve the automation matter.

This essay takes the three models from Allison and Zelikow book Essence of decision and applies them on the Swedish defense system. After the cold war the Swedish defense system had to undergo changes to be a more modern defense and be able to defend Sweden against threats. To also be able to cooperate with other countries in peacekeeping operations the Swedish defense had to be reorganized. The solution was to change direction from a defense system that was organized for invasion to instead be a movable defense ready for any challenge in Sweden or abroad. This reorganization will be analyzed according to the three different models..

To reconstruct a building is a long-term investment for farmers and it is important that people with different qualifications are involved at an early stage for making the system adapted to the animals as well the animal keeper. Therefore, ethologists who can contribute with their expertise are needed to design the system and get it to function well for the animals.A Swedish farmer who planned to rebuild her stall for tied dairy cattle to a loose-housing system for recruitment heifers for milk production asked me as an ethologist to find a system which can be fit to her existing tie-stall barn for 30 dairy cows, considering the animal needs in terms of movement, social interactions and play behaviors, and to theoretically compare the system with other systems with respect to the behaviors mentioned.The theoretical comparison between different systems was made through a scientific literature review.In agreement with the animal keeper I set out to fit a system with feeding cubicles, a system with cubicles and a system with deep straw bedding to the barn. After measurements were taken and preliminary drawings were outlined it was found that only the feeding cubicle system was possible to fit to the barn.The space provided will limit the animals to perform some playing behaviors. To decrease aggressive interactions between animals even thought a limiting area it is possible to provide partitions between resources animals compete around to prevent that more than one animal can get success to the resource at a particular place at one time. To increase the animal movement in the system the water trays were moved to the outer wall instead of kept in contact with the stalls.Although this report provides guidelines for rebuilding, other competences regarding building construction and a pre-test of the suggested building solution according to Swedish legislation are needed before the rebuilding can start.The results are directed mainly to the owner of the barn, but the literature review can be used by other cattle farmers and might bring increased understanding of the possible effects of different building solution on the animals..

The constant need of energy is something that affects us all no matter our current situation. Whether we are driving our car to work, taking the elevator or using the oven to cook dinner we end up relying on energy. Our whole society is continuously striving to achieve a higher grade of efficiency and the process of supplying ourselves with energy is no exception. The importance of appliances in our everyday life cannot be exaggerated and thus the importance of their high efficiency.Efficiency is already a keyword in the appliance industry with labels, stars and numbers helping us choosing the most suitable option for the task ahead. No matter how efficient appliances often use pure electricity as their energy source.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

Computer based information systems play an important role in modern military combat vehicles. The crew needs to be able to quickly get information about both the vehicle and its outer surroundings in order to quickly make the correct decisions. In this report, we describe the development of a prototype new information system for the BvS10 vehicle, manufactured by BAE System Hägglunds AB in Örnsköldsvik.An important aspect of the system is the time it takes from the point that the information is generated by the vehicle sensors until it is presented to the user. The system must be able to ensure that it never displays information that is out of date. Thus, it is important to create a layer and component based architecture for the solution, making it possible to control, in detail, the information?s age as it moves through the system.

 Date                   May 28, 2009Level                  Bachelor thesis in Business Administration/Information TechnologyAuthors             Jennie Andersson, Niklas Fridell, Visar HoxhaTutor                  Marie MörndalDepartment    HSTTitle                    ERP-solutions in small to medium sized enterprises ? possibilities and problemsSummary          ERP-solutions have penetrated the market for SME: s, offering the same advantages larger enterprises have enjoyed for years. For a significantly cheaper price, SME: s can nowadays acquire ERP-solutions and become more effective and increase their profit.  The authors have examined five SME: s in both the production and service company segment and have come to the conclusion that an ERP-solution would indeed benefit these companies in many levels but also induce certain obstacles the examined companies must overcome, both financial and organizational.Purpose            The purpose of this thesis is to examine if and how SME: s can become more efficient and developed and increase their profit by implementing an ERP-solution. Further, the purpose is to discuss which conditions that exists for the examined SME: s in order to implement an ERP-solution.Method            The thesis consists of a qualitative research where the authors have interviewed either the owner or employees at management level by using semi-structured interviews.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

This report will examine various solar energy technologies in order to decide if they could be applied in the Royal Seaport. The Royal Seaport is a Swedish urban district under development in Stockholm, with the goal of becoming a sustainable district. Two main techniques, solar collectors and solar cells, including sub-categories, are addressed in this report. Another sub-category, a hybrid system, will also be mentioned. The main difference between solar collectors and solar cells is the type of energy produced by the system.

This paper investigates the internal product costing system in one of the Swedish banks with the purpose to evaluate the quality of its product costs and possible implications on decision making. The study shows that the current system distorts product costs by, among other things, using relative allocation of costs and time and by allocating all costs to individual units of products. We therefore propose an alternative product costing system, which mainly draws on ABC theory but is also adapted to the specific needs of service companies and of the Bank. This proposal is intended as a solution in this particular case and not to be generalized in other contexts. We hope however to add to the understanding of why more complex costing systems, such as the ones based on ABC theory are, according to previous studies, not widely used in practice.

This Master of Science thesis project handles issues around managing data from the digital tachographsystem. European legislation states that companies must download the data of the digital tachograph systemand store it for at least one year for control purposes. The system stores data on the vehicle unit located inthe driving compartment and on smart cards personal for each driver.Acquiring data from the previous analogue tachograph was done instantaneously since the data wasphysically printed to a circular paper chart when driving. To acquire data from the digital system one mustperform a download from the vehicle unit and later transfer it to some form of backup solution for longterm storage. Data must also be downloaded from the driver smart cards.Download of data from the vehicle unit is the most time consuming task and may take up to 30minutes pervehicle.

AbstractEmbla 5 is an office building which has done a large improvement. The clients of this building has made an order of WSP and the student Anders Kempe to calculate the use of energy for the building, and after that result proposing further measures which can decrease the energy use of Embla 5.The ground for this report is when calculation of the present energy use of the building is stated. To make that information of a number of parameters such as envelope, the heating system and ventilation has been located and set in to the simulation program IDA ICE which calculate the energy use.To improve the energy use further this project has been concentrated to change the system of ventilation. Today the ventilation system is of the kind CAV (constant air volume) and the air flow is dimensioned for after recommendations from BBR and Arbetsmiljöverket in the office spaces. Consider that Embla 5  is an office building where the people only staying for 8-10 hours/day so was the ide to see how much energy saving if the air flow is reduced the time people not being in the building.

In this master thesis, the possibilities of customizing a low-cost microprocessor with the purpose of replacing an existing microprocessor solution are investigated. A brief survey of suitable processors is carried out wherein a replacement is chosen. The replacement processor is then analyzed and extended with accelerators in order to match set requirements.The result is a port of the processor Lattice Mico32 for the FPGA curcuit Xilinx Virtex-5 which replaces an earlier solution using Xilinx MicroBlaze. To reach the set requirements, accelerators for floating point arithmetics and FIR filtering have been developed. The toolchain for the processor has been modified to support the addition of accelerated floating point arithmetics.A final evaluation of the presented solution shows that it fulfills the set requirements and constitutes a functional replacement for the previous solution..