Syftet med arbetet har varit att undersöka om en viss arkitektur kan användas för att underlätta utvecklingen av ett Back Office-system till ett befintligt och komplext verksamhetssystem.För att gränsa av arbetet och hitta de delar som var intressanta att fokusera på genomfördes intervjuer med tre olika personer som hade olika syn på ett Back Office-system genom sin yrkesroll. Intervjuerna resulterade i ett antal önskemål för vad man ville uppnå med ett Back Office-system.Arbetet resulterade i en arkitektur som kan användas för att underlätta utvecklingen av ett Back Office-system till det befintliga verksamhetssystemet samt till verksamhetssystemet självt. Arkitekturen har utvärderats genom att man först ställde en mängd krav på den och sedan studerade hur den klarade av en mängd nya krav som delvis var relaterade till de gamla kraven.Alla tester som gjorts visar på att arkitekturen är väl designad och lätt att underhålla samt att den kommer underlätta den fortsatta utvecklingen av verksamhetssystemet och dess Back Office-system..

In the automatic manual transmission system, Opticruise, the choice of gear is based on several parameters such as road incline, driving resistance and vehicle mass. Many different mass estimations are made during driving. A final vehicle mass is then used to determine the current gear. Construction vehicles are often not equipped with air suspension and can therefore not estimate the vehicle mass when standing still. If that sort of vehicle is reloaded while standing still an incorrect mass estimation will be used and as an effect of that also a wrong gear.

The purpose of this Masters thesis is to compare the scheme structure of two national classifications system, namely the Swedish SAB system and the German ASB. It has been assumed that there are no major differences between the two models of classification systems or the main classes into which documents are placed. The classification theory and subject analysis, which form the basic theory on which my research is based, are taken from Dahlberg, Langridge and Rowley. A comparison of 30 monographs classified in the SAB system Sveriges allmänna biblioteksförening and in the German ASB system Allgemeine Systematik für öffentliche Bibliotheken showed that the classification structure was primarily responsible for determining where a particular document was placed. However, despite the fact that the subject in various documents may be similar, my research will demonstrate that the structure of the two codes also depends on different interpretations of the main subject in a document.

PAPRO operates within the Forest Research company and their mission is to develop value-addingindustry solutions. At present there are no good ways for mills to easily test the printing quality on newsprintpaper. There is a great need for a fast way to do this on different paper qualities; with a laboratory-offset press this can be both a time and money saving method. At PAPRO Forest Research, NewZealand, a laboratory offset press has been developed and designed, during the past seven years, concerningthis issue. Earlier projects were made concerning the press, e.g.

The purpose of this essay was to compare the Swedish and the Japanese pension system and see if there were any big differences or similarities. I was looking for answers to such questions as if the systems were modelled with the problematic demographic situation in mind and also how these two countries had tried to manage the problems. Path dependency was also a central conception when I studied the reforms of the two pension systems. I mainly used literature and Internet sources in my study. There were many books on the Swedish pension system and the debates that had been going on since the 80's.

The students participating in my development work will work with a process book for handicraft studies. In the beginning of their studies, the students need practical knowledge about the development of the profession itself, but they also need to be challenged and learn how to solve problems on their own which will help them gain a deeper knowledge of the subject.    I focus on open questions to create a process with the students. This process is created when working with Solution-Focused-Education. Through ?assessment for learning? we can help the students to improve their self-assessment and understanding of the learning process.

In today?s industry it is starting to get more and more interesting with wireless systems and solutions for applications. To be able to reduce the amount of cables drawn to various machines which takes both space and an extra fee for every cable drawn. Some systems might require the user to use a handheld device that is directly connected by a cable which in some machines might be inelegant for the user.The goal with this bachelor thesis is to develop wireless monitoring of the machine operators position that is working with heavy industrial machinery. The thesis started out with researching different techniques for positioning a transmitter indoors, this was done in order to get a better understanding on how to go about.

The aim of the study was to look at a particular work group of housing supporters, whomhave implemented two special working methods in their work. The methods have been implemented by two of the housing supporters that also have special education in the methodsSOC (Sense of Coherence) and solution focused brief therapy. The study is based on anethnographic observation and analysis of documents that are used in the implementation. To analyse the information that was given at the observation and in the document I´ve used a theory which illustrates the significance of developing professions so their knowledge become legitimate. I´ve also used a theory that illustrates the importance of implementation and how it´s done at its best.

In this Thesis the possibilities of designing a larger building that is very energy efficient in the sense that it would not need a conventional heating system are discussed. Solar radiation transmitted through the windows, internal heat from occupants, lamps and electric appliances inside the building and heat recovered from the ventilation system then have to be sufficient for the heating of the building. This study is of general interest since the property company, Akademiska Hus, plans to use this study as a first step in determining if this technique could be used in the future and thus be worth further investments. A building without a conventional heating system of the size investigated in this project has not yet been built.The energy needed for the heating of the building was simulated using VIP+.The conclusions from the study are that it is possible to build large buildings without any conventional heating system. This could be achieved in many different ways, for example by lowering the inside temperature or by using better windows and heat recovery system with higher efficiency.

The purpose of this paper is to make an analysis of the urban Roman water system. I have chosen to work with the system as a general field, not as a case study of a single town. In my opinion such a study would not give a proper and fair view of the subject. Therefore, this paper will discuss the different parts of the system, each one for itself and name examples wherever possible, to give a wide survey of the reality of the Roman water supply system. The aim is to give the reader a clear picture of different solutions used in the time of the early Roman Empire and a good understanding of the subject..

Tillverkande företag har under de senaste åren ställts inför en förändrad marknadssituation, vilket innebär att de fått förändra sitt arbetssätt från en produktionsorienterad syn till en kundorienterad syn. Den kundorienterade synen innebär att företag snabbt måste kunna ställa om sin produktion för att tillfredsställa kundens behov.MPS-system (Material- och ProduktionsStyrningssystem) är mycket effektiva hjälpmedel vid snabba beslut och omplaneringar, de ger dessutom möjlighet att ge kunder direkt besked om orderstatus. MPS-system tenderar att bli stora och komplexa, de har kontaktytor mot nästan alla delar i företagen.Många företag idag köper MPS-system. Stora företag byter gamla föråldrade system och allt fler små och medelstora företag inför MPS-system. Kommande milleniumskiftet är också en orsak till att flera företag byter sina MPS-system idag.Med detta väcktes intresset för att undersöka om företag som investerar i dyra MPS-system verkligen får ut det de förväntar sig av dem.

These studies are done in behalf of Saab AB AVITRONICS in Järfälla in the form of a thesis atthe Royal Institute of Technology in Stockholm.The task was to examine the parameters that plays a role in the construction of modern radomesoperating in broadband applications.This was interesting for Saab to get an indication of which way they should go at the newdevelopment of radomes for the next generation of equipment for electronic warfare.After a thorough analysis of the influencing parameters, a optimization application was made toget a automated way to get a radome design by specifying data on the radome size, airloads,materials, etc.This is to minimise the time of the laborious work that radome development.inply.This was solved by letting ANSYS calculate the strength of the radome structure and MATLABcalculate electromagnetic data and cost models of different sizes and materials.All these parameters woven together with the optimization tool modeFrontier picks data from therespective program and perform an optimization algorithm and then iterate a step and sends thisdata to calculation programs for the new input data. In the end, we have received a convergedpoint with our optimal solution.For the presumptions and limitations for which applied for this thesis, the result was prettyintuitive. That is to say that the smaller radome - the less materal is needed and lowermanufacturing costs results in the cheapest solution possible. The reality is not so simple. Whereyou have to take more of the electrical details such as the effect on the transmitter as a majorfactor..

A performance measurement system can be used as a means to evaluate past performances and to communicate prioritizations. It has also been proposed that a performance measurement system can serve as a method to execute strategies, guide in operational decisions and constitute a tool for making the organization more efficient. Yet one may question if such a system will ever reach this capacity if operating managers do not utilize it as a management tool, but rather treat it as a mere report in the bunch. This paper explores how middle managers in fact apply performance measures and what obstacles there are to integrating them in the management of subunits. Furthermore it serves to investigate whether these managers experience a conflict between how they are expected to use the measures and what they deem possible to adopt.

I have done a comparative gender study of Library of Congress Classification from 1900 and 2001. I have also used a hermeneutic method and ideological critics to find out what picture of women the both systems shows. In my comparative study of the both systems I have found low update of classes which relates to women in the new classification system. Men seem to be a norm in the system, because men are not defined in classes related to both men and women. But many classes related to women are named Women as and Women in The study also shows that women are more related to subjects about family and marriage than men are.

Vårdsektorns IT-system fungerar inte optimalt ur användarsynpunkt då acceptansen bland de olika professionerna är låg.  När IT-systemen inte klarar av att stötta vårdaktörerna i deras dagliga arbete så kan det medföra en rad olika följder så som stress, tidsbrist och minskad patientsäkerhet. Därför ser vi att IT-systemen bör utvecklas ut användarsynpunkt för att klara av att fylla sin funktion som ett hjälpmedel i vården. Denna uppsats ämnar undersöka hur användarinvolvering vid systemutvecklingsprojekt i vården kan utvecklas. Genom en intervjustudie så kartlades den nuvarande situationen i vården. Med detta som utgångspunkt har vi sedan föreslagit tekniker och verktyg som kan hjälpa leverantörer och beställare att förbättra användarinvolveringen vid implementering av nya IT-system i vården.Nyckelord; IT-system i vård, användarinvolvering, Participatory Design, systemutveckling.