This report is the result of a master thesis at the Department of Mechanical Engineering, Division of Industrial and Economical Development, at Linköping University of Technology. The project was carried out on behalf of Fanerami AB, Mjölby and includes 20 weeks of full time schedule work.Cabinets with vertical mounted roller shutters all share the same problem, namely weight balancing. A roller shutter has an equilibrium area where the sum of the different forces acting on the shutter equals zero. As the shutter leaves that area it will pick up speed as it falls towards the bottom. When the shutter hits the bottom of the cabinet there is a potential risk of getting fingers caught and in this project a solution to prevent this from happening was to be presented.In this project, three concepts have been generated with the following different purposes:?In concept 1 the risk of getting any fingers caught when the shutter closes was to be eliminated in an efficient and inexpensive way.?In concept 2 the roller shutter had to be balanced at all time providing the possibility to keep the cabinet open in any position.?The last and most challenging task was to create a remote controlled TV cabinet.

The automotive market is currently undergoing a historical change where stricter emission legislations and ever increasing fuel costs have intensified the search for effective alternatives to the conventional internal combustion engine, which has resulted in a substantial trend towards electrification of powertrains. Storage of electrical energy is the fundamental component in this technology where the lithium-ion batteries are currently considered as the most appropriate solution. Lithium-ion batteries, however, as other types of batteries, can only be used efficiently and durably within a specific temperature range.This Master thesis has been carried out in collaboration with Electroengine in Sweden AB, situated in Uppsala, which has an ongoing project regarding development of a modular battery system for electric powertrains. The project is at a stage where an initial prototype has been developed which provides the foundation for this thesis. The study has addressed the battery system performance from a thermal perspective, in order to validate the ability of the system to create a thermally serviceable environment for the lithium-ion battery cells.

This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..

This study was carried out in Jordan with the purpose to investigate the bacterial microflora of egg shells from cage systems and from deep litter floor systems. Another aim wasto get a general impression of the hygiene, at farm level, of egg production in Jordan andthe factors affecting it.Eggs from two cage systems and three floor systems were analyzed, regarding bacterialcontamination of the egg shells. Egg samples were taken from the storage room, the eggcradle in the cage system and from the nest and floor in the floor system. To get a generalimpression of the hygiene at the farms, swab tests and air tests were performed. Swab testswere performed with a sterile cotton swab at the same units as the eggs were sampled andair tests were performed by opening petri dishes where the hens were staying.

The aims of the practical work carried out for this thesis were to redesign a clinical decision support system for thoracic surgeons, called AssistMe, and to evaluate the concept behind this system. The main objective of the thesis is to give an account of the considerations that were found to be of key importance for designing a clinical decision support system for thoracic surgery. Another aim was to let future users test the system after it had been redesigned and evaluate the concept behind it. The thesis also investigates users? experience of the system and their views on whether it would be applicable in their daily work practice.

The aim of this thesis is to investigate the opportunities of classification of web pages. Two classification systems are compared; a library classification system traditional and a system that is developed for use on the web new. UDC is chosen to represent the traditional systems, and Yahoo! represents a so called new system. UDC is used by NISS Directory of networked resources, which is a directory that uses the system for organisation of electronic resources. Both systems are analysed from two different perspectives, a multidisciplinary and a timeperspective.

A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.

This thesis work has been performed on request by SWT (Scandinavia WeldTech AB). SWT manufactures, develop and sell ready to assemble building systems for concrete rafter beam applications. The beams in this system consist of a u-beam that is welded to a flange. To be able to fill the beams with concrete there is holes in the beams top end. The holes are made in a ?punching machine?.  These holes are cut out and the remaining steel piece is bent down in the u-beam.

The client, Senselogic, had noticed an increased demand for an e-commerce system integrated into its product, SiteVision, something that did not previously exist. Senselogic wanted to integrate a third-party system to manage e-commerce. The problem was that there were very many e-commerce solutions to choose from. In order to select the best system it was necessary to evaluate the e-commerce systems and compare them to each other. To identify the elements that has to be included in an e-commerce system a study of literature was conducted.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

SharePoint is a web based platform designed to provide internal communications and file sharing for businesses and organizations.In this project, we created a system consisting of multiple applications to be used together with SharePoint. These applications are meant to simplify the workflow for internal orders of products. The system is targeted towards companies that do not have a flexible approach to digital orders or companies that want to integrate this functionality into their SharePoint platform. The project includes, in addition to the creation of the system, installation of the software and the servers needed to run a SharePoint environment and their configurations.The system consists of four applications where one of these, the store application, is required for the system to be used at all. The other applications are an order management application, a purchase application and an incoming delivery application. Of these four, we have implemented the store application and the order management application. Our hope is that users will find the system easy to use and graphically appealing..

Ett ERP-system syftar till att ta hand om företagets resurser och skapa ett enhetligt integrerat system för dessa. ERP-system kan också användas för informationsutbyte mellan företaget, kunden och leverantörens system. Behov av ERP-system finns inom de flesta branscher oavsett storlek och inriktning men kritik har riktats mot att systemen inte lever upp till användarnas förväntningar eller tillfredställer användarens behov. Arbetets fokus ligger koncentrerat på hur mindre företags uppfattning om ERP-system är och vad som krävs av en ERP-leverantör för att i framtiden tillfredställa mindre företag. En surveyundersökning har använts för att få fram relevant information för att lösa min problemprecisering.

In Sweden there is a large interest in renewable energy but the market for solar power is still small compared to other countries such as Germany. Here many farmers produce their own electricity. The Federation of Swedish farmers have acknowledged the potential for Swedish farmer to produce electricity and there is an interest among the farmers. The agricultural branches in Sweden most suitable for solar power are pig production and poultry due to the even electricity need throughout a year. Swedish pig farmers are going through a period of unsteady profitability which makes it interesting to see whether producing their own electricity can affect the economic situation.

This master thesis has been performed at the department of Machine Design at KTH, The Royal Institute of Technology. The thesis has been a part of a global development project in collaboration with Luleå University of Technology, Lund Faculty of Engineering and Stanford University. Corporate liaison and sponsor has been Immerse Global Inc. The project was also performed on sponsorship from the Product Innovation Engineering Program, PIEp. The thesis is a representation of some of the contributions made by the authors.The lack of clean drinking water is one of the key issues facing the world today.

This document is a summary of my work to create a project management system for a small firm working with computer graphics. The intention is to manage customers, projects, images and invoices in the easiest possible way. To make the system as flexible as possible a web-interface was chosen which makes it possible to access the system from any computer, making it independent of any particular operating system. The only requirement on the user environment is that the computer must have a connection to the Internet to be able to access the system. The different techniques that have been used to develop the project management system is primarily Ruby on Rails and a MySQL database.